NEW | Dozers - D6T XL

original
*The model image shown is for demonstration purposes only. Contact dealer for complete unit details.
Listing Details
Description
Model:D6T XL
Product Family:Dozers
Manufacturer:CAT
Year:2017
Serial Number:0NDY00245
Location:SAN DIEGO, RANCHO BERNARDO
Unit Number:H15802
Machine Spec Detail
REGIONAL PACKAGE, US
BASIC ARRANGEMENT
FINAL DRIVE, XL
ENGINE, BASIC
PRECLEANER, BASIC
OIL CHANGE SYSTEM, HIGH SPEED
UNDERCARRIAGE, HD, PART GUIDE
TRACK, 560MM / 22" ES HD
FAN, BASIC
HYDRAULICS, RIPPER
ALTERNATOR, 150 AMP
LIGHTS, 6, BASIC
CAB, SINGLE PANE
AIR CONDITIONER, ROPS
SEAT, AIR SUSPENSION
ACCUGRADE READY
PRODUCT LINK, CELLULAR PLE641
ALARM, BACKUP
FUEL TANK, FAST FILL
GUARD, BOTTOM
6 RIPPER, MULTI-SHANK
HANDLES, BASIC
ENGINE COOLANT, STD (-37C)
VISIBILITY ARR, SINGLE CAMERA
6SU XL BULLDOZER
CYLINDERS, LIFT, STD, XL/XW
BLADE, 6SU XL ARO
TOOTH, CURVED
ACCUGRADE READY
CERT EMISSIONS, EPA/EU
General Machine Specifications

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Engine
Engine ModelCat C9.3 ACERT™
Flywheel Power215 mm H2O
Displacement567 in³
EmissionsU.S. EPA Tier 4 Final
Net Power - 2,200 rpm - ISO 9249/SAE J1349215 mm H2O
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm245 mm H2O
Note (1)All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
Note (2)Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Build Number19
Service Refill Capacities
Fuel Tank97.2 gal (US)
Cooling System12.2 gal (US)
Engine Crankcase6.5 gal (US)
Power Train39.1 gal (US)
Final Drive - Each3.6 gal (US)
Hydraulic Tank16.5 gal (US)
Roller Frames - Each6.6 gal (US)
Pivot Shaft Compartment1.3 gal (US)
DEF Tank4.5 gal (US)
Weights
Operating Weight47138 lb
Operating Weights
LGP A53829 lb
LGP S51385 lb
XL A47846 lb
XL SU47138 lb
XL VPAT53042 lb
XW A49797 lb
XW SU48909 lb
XW VPAT54045 lb
LGP VPAT54526 lb
NoteOperating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
Blades - Capacity
LGP A-Blade6.46 yd³
LGP S-Blade4.96 yd³
XL A - Blade5.17 yd³
XL SU - Blade7.26 yd³
XL VPAT - Blade6.07 yd³
XW A - Blade5.69 yd³
XW SU - Blade7.38 yd³
XW VPAT - Blade6.57 yd³
LGP VPAT - Blade6.57 yd³
Blades - Width
LGP A-Blade16.6 ft
LGP S-Blade13.3 ft
LGP VPAT - Blade13.7 ft
XL A - Blade13.7 ft
XL SU - Blade10.7 ft
XL VPAT - Blade12.7 ft
XW A - Blade14.8 ft
XW SU - Blade11.7 ft
XW VPAT - Blade13.7 ft
Dimensions - LGP
Ground Clearance16 in
Ground Pressure (ISO 16754)(3)5.11 psi
Length - Basic Tractor(2)14.5 ft
Length - Track on Ground10.67 ft
Machine Height - To Product Link Antenna(1)10.83 ft
Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track10.5 ft
Dimensions - LGP VPAT
Ground Clearance16 in
Ground Pressure (ISO 16754)(3)6.28 psi
Length - Basic Tractor(2)16.42 ft
Length - Track on Ground10.67 ft
Machine Height - To Product Link Antenna(1)10.83 ft
Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track10.33 ft
Dimensions - XL
Ground Clearance15 in
Ground Pressure (ISO 16754)(3)8.66 psi
Length - Basic Tractor(2)13.83 ft
Length - Track on Ground9.25 ft
Machine Height - To Product Link Antenna(1)10.67 ft
Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track8 ft
Dimensions - XL VPAT
Ground Clearance15 in
Ground Pressure (ISO 16754)(3)9.78 psi
Length - Basic Tractor(2)16.08 ft
Length - Track on Ground9.25 ft
Machine Height - To Product Link Antenna(1)10.67 ft
Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track8.92 ft
Dimensions - XW
Ground Clearance15 in
Ground Pressure (ISO 16754)(3)6.64 psi
Length - Basic Tractor(2)13.83 ft
Length - Track on Ground9.25 ft
Machine Height - To Product Link Antenna(1)10.67 ft
Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track9.17 ft
Dimensions - XW VPAT
Ground Clearance16 in
Ground Pressure (ISO 16754)(3)6.92 psi
Length - Basic Tractor(2)16.42 ft
Length - Track on Ground10.67 ft
Machine Height - To Product Link Antenna(1)10.83 ft
Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track9.83 ft

  • new, Fully Automatic Four-speed Lock-up Clutch Transmission Continuously Optimizes Gear And Engine Speed For The Application Without Added Operator Input.
  • added Gear Between First And Second, And Seamless Lock-up Clutch Engagement, For Exceptionally Smooth Shifting.
  • maintains Power To The Ground Through Load Changes For An Aggressive Feel In The Dirt.
  • up To 2.5 Percent More Productive – Move More Material Per Hour.*
  • faster Implement Response*, Especially With Grade Technologies.
  • versatility – Pushing Power You Want For Heavy Dozing And The Fine Control You Need For Finish Grading – All In One Easy-to-transport Machine.
*compared To Previous Model.

  • full-time Auto Shift For Significantly Better Fuel Efficiency With Less Operator Effort – Without Sacrificing Performance.
  • up To 20 Percent More Fuel Efficient* – As Much As 30 Percent Better In Lighter Load Finish Grading Applications.
  • sustainable: Fuel Savings Reduces Co2 Production By An Average Of Approximately 16.6 Metric Tons (17.7 Tons) Per Year.
*compared To Previous Model.

  • automatically Maintain Established Blade Mainfall/cross Slope With Cat Grade With Slope Assist (standard). Finish Jobs Faster, With Better Surface Quality And Significantly Less Operator Effort. No Additional Hardware Required.
  • whether Production Dozing Or Finish Grading, Take On 3d Design Plans More Efficiently With Cat Grade With 3d (optional). Factory Integrated Grade Control System Features Cab Roof-mounted Gnss Antennas To Eliminate Blade Masts And Cables. Includes Autocarry™ To Further Boost Productivity.
  • versatile, Scalable Cat Accugrade™ (optional) Is A Dealer-installed Grade Control System. Choice Of Laser, Global Navigation Satellite System (gnss) Or Universal Total Station (uts) So You Get The Right Level Of Accuracy To Match Your Job Requirements.
  • factory Equip Your Dozer For Easy Installation Of An Accugrade System With The Accugrade Ready Option (aro) (optional).
  • manage Your Fleet More Effectively And Profitably With Product Link™/visionlink® Remote Monitoring.

  • change Ground Speeds Easily – In Large (half Gear) Or Small (one-tenth Gear) Increments – With Detented Thumb Roller.
  • new Liquid Crystal Display (lcd) Places Machine Data, Settings Menus, Grade Control Data And More Conveniently In Front Of The Operator.
  • display Enables Coded Start And Operator Profiles.
  • improved Blade Feedback With Updated Implement Joystick.
  • more Ground Clearance And Better Penetration With New High-lift, Multi-shank Ripper.

listofrelationships

original

original

original

original

original

original

original

original

original

I am interested in this listing