New | AP255E Paver

With a single operator, the AP255E meets all requirements for small and medium sized jobsites. Easy, simplified driving - with controls which give precise, immediate response. The AP255E is a compact, extremely versatile paver finisher, ideal for small jobsites in urban centers. For sidewalks, cycle paths, playgrounds, trench back filling and all maintenance and repair work, where it shows its notable qualities and features. This paver is designed to operate in limited spaces, thanks to its compactness and exceptional maneuverability.

Maximum Operating Weight9921.0 lb
Operating Weight with Screed9921.0 lb
Operating Specifications
Standard Paving Width1400 mm - 2600 mm (4.6 - 8.5 ft)
Paving Width Minimum0.5 ft
Paving Width Maximum11.08 ft
Hopper Capacity109.0 ft3
Inside Turning Radius2.3 ft
Maximum Paving Speed with Vibratory Screed108.0 ft/min
Maximum Travel Speed2.0 mph
Truck Dump Height23.0 in
Truck Entry Width9.8 ft
Gross Power46.0 hp
Displacement135.0 in3
Engine ModelCat C2.2
Drive System
Maximum Paving Speed108.27 ft/min
Service Refill Capacities
Fuel Tank Capacity17.0 gal
Hydraulic Oil Tank19.28 gal
Cooling System4.49 gal
Hopper Capacity109.48 ft3
Track Contact Length4.6 ft
Overall height8.3 ft
Inside Turning Radius2.3 ft
Length with Push Roller and Largest Screed13.8 ft
Length with push roller & screed13.8 ft
Maximum Height8.3 ft
Tractor Operating Width9.83 ft
Transport Height5.75 ft
Transport Width, Hoppers Raised, Screed End Gates Attached5.25 ft

The machine’s tracked undercarriage, fitted with heavy-duty rubber bonded pads, provides excellent stability and weight distribution minimising the negative effect of an uneven base. Track tension is assured by two grease pistons with a shock absorbing system.

Reliable Cat® C2.2 engine provides ample power and is EU Stage IIIb and U.S. Tier 4 Interim emissions compliant.

The electric heated screed is powered by an onboard generator with independent temperature control in all four sections. Three heating elements for each screed section ensure uniform heating over the entire screed plate.

The hoppers are hydraulically operated and independently controlled facilitating applications close to walls or other vertical objects. The asphalt mix is carried to the screed by a heavy-duty steel conveyor and is distributed by two independently controlled augers, with reversible rotation. Three automatic material feed sensors provide correct amount of material to the screed. Augers can be hydraulically raised to avoid obstacles, facilitate machine loading on trailer and assembly of the paving width reduction option group. Conveyor and augers are reversible.

The operator drives the paver from the platform positioned behind the screed. The console panel is fully equipped with comprehensive controls allowing a single operator to conveniently monitor all machine functions. The operator platform is fitted with an operator presence detector enabling machine functions when the operator is in the driving position.

The AP255E ensures excellent access to all machine parts requiring scheduled maintenance. Large access doors provide quick and easy inspection of main components.

Optional Equipment

Power supply, 110V or 230V
Grade & Slope Control
Mechanical Feed Sensor
Central Paving Width Reduction Package - 0.5 m to 1.40 m
Right Side Paving Width Reduction Package - 0.15 m to 1.00 m
Mechanical (bolt-on) extensions to reach 3.40 m paving width





Machine Comparison

Other Models in this Category

Select Product Category