New | 415F2 Backhoe Loader

Experience the new Cat 415F2 Backhoe Loader with features including spacious operator station, optional pilot controls, superior durability and outstanding performance. Safely operate on the job site with quieter hydraulics, increased visibility, and the ability to have four wheel braking engaged without wearing on tires or drive train.

Engine
Net Power - SAE J134968 HP
Bore3.9 in
Stroke4.33 in
Displacement207 in³
Engine ModelCat® C3.4B
Gross Power - ISO 1439674 HP
Gross Power - SAE J199574 HP
Net Peak Power - 1,800 rpm - EEC 80/126973 HP
Net Peak Power - 1,800 rpm - ISO 924973 HP
Net Peak Power - 1,800 rpm - SAE J134972 HP
Net Torque Rise - 1,400 rpm - SAE J134988 %
Rated Net Power - 2,200 rpm - EEC 80/126969 HP
Rated Net Power - 2,200 rpm - ISO 924968 HP
Rated Net Power - 2,200 rpm - SAE J134968 HP
Net Peak Torque - 1,400 rpm307 ft-lb
NoteEngine meets U.S. EPA Tier 4 Final emission standards.
Rated Net Power - ISO 924968 HP
Rated Net Power - SAE J134968 HP
Weights
Operating Weight - Maximum24251 lb
Cab - ROPS/FOPS359 lb
Four Wheel Drive392 lb
Air Conditioning101 lb
Counterweights - Option 1255 lb
Extendible Stick659 lb
MP Bucket (0.96 m3/1.25 yd3) - No Forks or Teeth1642 lb
Operating Weight - Maximum - ROPS Capacity24251 lb
Operating Weight - Minimum15207 lb
Counterweights - Option 2530 lb
Counterweights - Option 31015 lb
Backhoe
Dig Depth - Standard14.3 ft
Dig Depth - E-Stick Extended17.9 ft
Hydraulic System
Pump TypeVariable Flow, Axial Piston
Pump Capacity at 2,200 rpm35 gal/min
System Pressure - Backhoe3336 psi
System Pressure - Loader3336 psi
TypeClosed Center
Transmission
Power Shuttle Transmission - Forward 1st3.4 mile/h
Power Shuttle Transmission - Forward 2nd5.5 mile/h
Power Shuttle Transmission - Forward 3rd12 mile/h
Power Shuttle Transmission - Forward 4th23 mile/h
Power Shuttle Transmission - Reverse 1st3.4 mile/h
Power Shuttle Transmission - Reverse 2nd5.5 mile/h
Power Shuttle Transmission - Reverse 3rd12 mile/h
Power Shuttle Transmission - Reverse 4th23 mile/h
Service Refill Capacities
Cooling System with Air Conditioning5.8 gal (US)
Engine Oil - With Filter2.3 gal (US)
Front Axle (4WD)2.9 gal (US)
Front Axle (4WD) - Planetaries0.2 gal (US)
Fuel Tank42 gal (US)
Hydraulic System23.8 gal (US)
Rear Axle4.4 gal (US)
Rear Axle - Planetaries0.4 gal (US)
Transmission - Power Shuttle - 2WD4 gal (US)
Transmission - Power Shuttle - 4WD4 gal (US)
Hydraulic Tank10.6 gal (US)
NoteRequires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
Steering
Bore2.6 in
Power SteeringHydrostatic
Rod Diameter1.4 in
Stroke4.7 in
TypeFront Wheel
Axle Oscillation11°
Turning Circle - 2WD/AWD (inner wheel not braked) - Outside Front Wheels26.8 ft
Turning Circle - 2WD/AWD (inner wheel not braked) - Outside Widest Loader Bucket36 ft
Axle Ratings
Front Axle (2WD) - Dynamic20233 lb
Front Axle (2WD) - Static50582 lb
Front Axle (4WD) - Dynamic20233 lb
Front Axle (4WD) - Static50582 lb
Rear Axle - Dynamic20233 lb
Rear Axle - Static50582 lb
Brakes
Feature (1)Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Feature (2)Self-adjusting, completely enclosed and sealed.
Feature (3)Foot operated brake pedals can be interlocked for roading.
Feature (4)Parking/secondary brakes are independent of the service brake system.
Feature (5)Parking brake is mechanically applied through an adjustable hand lever located on the right console.
Engine Features
Feature (1)Regeneration is passive and does not require any input from the operator or disrupt work.
Feature (10)Direct injection fuel system provides accurate fuel delivery and efficiency.
Feature (11)Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
Feature (12)Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
Feature (13)Standard glow plug starting aid system for efficient cold weather starting.
Feature (14)High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
Feature (15)Higher low end torque for better engine/machine performance.
Feature (16)Engine is equipped with electric fuel priming pump.
Feature (2)Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
Feature (3)Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
Feature (4)Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
Feature (5)For durability, inlet valves are nitrided, martensitic chrome silicon steel.
Feature (6)For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
Feature (7)Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
Feature (8)Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
Feature (9)Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
Standards
Cab - FOPSSAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Cab - ROPSSAE J1040 MAY94; ISO 3741 1994
Cab - SoundANSI/SAE J1166 OCT98 is 79 dB(A)
BrakesSAE J/ISO 3450; ISO 3450 1996
Exterior SoundSAE J188 JUN86 is 76 dB(A)
Tires
Choice 1Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Choice 2Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
Choice 3Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
Choice 4Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
Choice 5Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
Choice 6Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
Choice 7Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8
  • Operator Station
  • Power Train
  • Advanced Hydraulics
  • Backhoe Performance
  • Loader Performance
  • Work Tools
  • Serviceability
  • Customer Support

listofrelationships

original

original

original

original

original

original

original

Other Models in this Category

Select Product Category