New | CB54B Tandem Vibratory Roller (Split Drum)
The Cat® CB54B is a 10 ton roller with 1700 mm (67") tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other granular materials. It features exceptional visibility and control, smooth operating powertrain, versatile vibratory systems, Cat Compaction Control, and the industry leading water spray system.
|Operating Weight||23525.0 lb|
|Operating Weight at Rear Drum with ROPS/FOPS||11398.0 lb|
|Operating Weight at Front Drum with ROPS/FOPS||11552.0 lb|
|Operating Weight with cab||23525.0 lb|
|Maximum Weight at Front Drum||11706.0 lb|
|Maximum Weight at Rear Drum||11817.0 lb|
|Operating Weight with ROPS/FOPS||22950.0 lb|
|Standard Compaction Width||67.0 in|
|Curb Clearance||37.0 in|
|Turning Radius Inside Drum Edge||14.3 ft|
|Ground Clearance||10.0 in|
|Maximum Compaction Width||73.0 in|
|Static Linear Load||176.0 lb/in|
|Travel Speed - Maximum||7.5 mph|
|Gross Power||133.2 hp|
|Engine Model||Cat® C4.4 with ACERT Technology|
|Service Refill Capacities|
|Fuel Tank Capacity||55.0 gal|
|Water (Spray) Tank Capacity||221.0 gal|
|Drum Width||67.0 in|
|Drum Diameter||47.0 in|
|Vibration Selection||Independent per drum, front only, rear only, both|
|Eccentric Weight Drive||Hydraulic direct, auto reversing|
|Centrifugal Force per Drum - Maximum||19491.0 lb|
|Centrifugal Force per Drum - Minimum||16973.0 lb|
|Nominal Amplitude - High||0.024 in|
|Nominal Amplitude - Low||0.013 in|
|Overall Length||177.0 in|
|Height with ROPS/FOPS||117.0 in|
|Compaction Width||67.0 in|
|Overall Width||74.0 in|
|Drum Diameter||47.0 in|
|Drum Width||67.0 in|
The B-Series Tandem Vibratory Rollers offer unobstructed sight lines with standard 180° seat positioning and ability to rotate 360° for excellent all-around visibility. Also, drum edge and drum surface lighting provide better lighting for nighttime operation. The innovative handwheel steering technology eliminates the front console that is commonly found on other machines for precise machine control.
Comfortable Operating Station
The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.
The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.
The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.
The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.
Cat Tandem Vibratory Rollers quickly reach target densities due to their versatile frequency and amplitude selections. These powerful rollers also provide finesse when necessary due to their flexible front or rear drum only vibratory capability.
Split Drum Design
The exclusive split-drum design delivers excellent mat quality in urban environments when frequent turning is required. When turning, the outside drum half rotates faster than the inside drum, eliminating the potential for shoving and tearing that occurs on standard vibratory drum designs. The exclusive axle-type pod design utilizes tapered roller bearings that support each drum half and eliminates any potential for contact between the two halves.
Dual Amplitude/Dual Frequency Vibratory System
The dual amplitude, dual frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.
The vibratory system offers multiple options that help fine-tune performance. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.
The optional Cat Compaction Control helps contractors increase efficiency and productivity while recording data for quality control documentation and future planning.
Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.
Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.
Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.
The B-Series tandem rollers are powered by Cat® engines with ACERT™ Technology. The engine includes a variety of features that help reduce fuel burn, including ECO-mode, yet still deliver the power required on challenging jobsites. Tough components help extend compactor life.
Cat® C4.4 Engine
The C4.4 engine provides 98 kW (131 hp) of power and meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).
High Capacity Cooling System
The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. Two high volume fans direct warm air away from the operator for a more comfortable operating environment.
|Cat® Compaction Control|
|Water Distribution Mats|
|Water Spray Freeze Protection Kit|
|High Intensity Discharge Lights|
|Drum Edge Lighting Package|
|High Ambient Cooling System|
|Air Suspension Seat w/heat|
Other Models in this Category
- CCS7 - 1000027460
- CCS9 - 1000027463
- CB14B - 900 mm (35") - 18347513
- CB14B - 1000 mm (39") - 18349873
- CB22B HRC - 18504879
- CB24B HRC - 18547413
- CB24B XT HRC - 18547680
- CB32B HRC - 18547770
- CC24B HRC - 18548134
- CB34B HRC - 18547895
- CB34B XW HRC - 18548029
- CC34B HRC - 18548221
- CB7 - Solid Drum - 1000027028
- CB7 - Split Drum - 1000030920
- CB44B - Solid Drum - 18349544
- CB44B - Split Drum - 18350130
- CB8 - 1000027031
- CB10 - Solid Drum - 1000027027
- CB10 - Split Drum - 1000030923
- CB54B - Solid Drum - 18348397
- CB54 - 2011 - 18243546
- CB54 XW - 2011 - 18243667
- CB64B - 1000004093
- CB66B - 1000004094
- CB64 - 2011 - 18243890
- CB68B - 1000004092
- CD44B - Solid Drum - 18349755
- CD44B - Split Drum - 18350504
- CD8 - Solid Drum - 1000027029
- CD54B - Solid Drum - 18350540
- CD54B - Split Drum - 18350591
- CD8 - Split Drum - 1000030922
- CD10 - Solid Drum - 1000027026
- CD10 - Split Drum - 1000030921
Select Product Category
- Articulated Trucks
- Asphalt Pavers
- Backhoe Loaders
- Cold Planers
- Compact Track and Multi Terrain Loaders
- Material Handlers
- Motor Graders
- Off-Highway Trucks
- On-Highway Trucks
- Road Reclaimers
- Site Prep Tractors
- Skid Steer Loaders
- Track Loaders
- Wheel Dozers
- Wheel Excavators
- Wheel Loaders
- Wheel Tractor-Scrapers