New | D5K2 Track-Type Tractor

Engine
Engine ModelCat C4.4 ACERT
Power - Net104 hp
Displacement269 in3
Rated Net Power @ 2,200 rpm – SAE J1349104 hp
Rated Net Power @ 2,200 rpm – ISO 9249/EEC 80/1269104 hp
NoteEngine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Bore4.13 in
Stroke5 in
Weights
Operating Weight - XL20313 lb
Operating Weight - LGP20992 lb
Operating Weight – LGP, 762 mm/30 in21442 lb
NoteSpecs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Transmission
Drive Pumps1
Track Motors2
Relief Valve Settings7033 psi
Maximum Travel Speed – Forward5.6 mph
Maximum Travel Speed – Reverse6.2 mph
Service Refill Capacities
Fuel Tank51.5 gal
Crankcase and Filter2.91 gal
Final Drives, XL (each side)2.6 gal
Final Drives, LGP (each side)2.6 gal
Cooling System5.92 gal
Transmission/Hydraulic Tank15.7 gal
Diesel Exhaust Fluid (DEF) Tank4.9 gal
Hydraulic Controls
Pump Output17.7 gal/min
Relief Valve Settings2988 psi
Winch
Weight1345 lb
Winch DriveHydrostatic
ControlHydraulic
SpeedVariable
Winch Length27.76 in
Overall Width29.2 in
Drum Diameter10 in
Drum Width10.8 in
Throat Clearance6.75 in
Rope Diameter – recommended0.63 in
Rope Diameter – optional0.75 in
Drum Capacity – recommended cable371 ft
Drum Capacity – optional cable256 ft
Maximum Line Pull – bare drum40000 lb
Maximum Line Pull – full drum25000 lb
Maximum Line Speed – bare drum131 ft/min
Maximum Line Speed – full drum207 ft/min
Ripper
TypeParallelogram
Number of Shanks3
Maximum Digging Depth13.3 in
Maximum Reach at Ground Line21.9 in
Maximum Ground Clearance Under Tip17.6 in
Overall Width67.3 in
Height6.5 in
Weight1222 lb
Undercarriage
Shoe Width – XL20 in
Shoe Width – LGP26 in
Length of Track on Ground – XL91 in
Length of Track on Ground – LGP91 in
Track Gauge – XL63 in
Track Gauge – LGP69 in
Ground Contact Area – XL3652 in2
Ground Contact Area – LGP4726 in2
Ground Pressure – XL5.6 psi
Ground Pressure – LGP4.5 psi
Ground Contact Area – LGP, 762 mm (30 in)5514 in2
Ground Pressure – LGP, 762 mm (30 in)3.93 psi
Shoe Width – LGP, 762 mm (30 in)30 in
Track Gauge – LGP, 762 mm (30 in)73.2 in
Number of Rollers (each side)7
Number of Shoes (each side) – Sealed and Lubricated Track (SALT) Undercarriage40
Number of Shoes (each side) – SystemOne Undercarriage36
Length of Track on Ground – LGP, 762 mm (30 in)91 in
Cab
Sound Levels: ISO 6396:200877 dB(A)
Sound Levels: SAE J1166 FEB200878 dB(A)
ROPSSAE J397-OCT95, SAE J1040-May94, ISO 3471-94, ISO 3164 2008
FOPSSAE J231-JAN81, ISO 3449 2005 Level III
Dimensions
Track Gauge – XL63 in
Track Gauge – LGP68.9 in
Track Gauge – LGP, 770 mm (30 in) shoes73.2 in
Width of Tractor (standard shoes, no blade) – XL83.1 in
Width of Tractor (standard shoes, no blade) – LGP94.9 in
Width of Tractor (standard shoes, no blade) – LGP, 770 mm (30 in) shoes103.5 in
Overall Length (with blade) – XL170.1 in
Overall Length (with blade) – LGP169.1 in
Overall Length (with blade) – LGP, 770 mm (30 in) shoes169.1 in
Length of Basic Tractor (without blade) – XL128.5 in
Length of Basic Tractor (without blade) – LGP128.5 in
Length of Basic Tractor (without blade) – LGP, 770 mm (30 in) shoes128.5 in
Tractor Height – XL109 in
Tractor Height – LGP109 in
Tractor Height – LGP, 770 mm (30 in) shoes109 in
Ground Clearance – XL13 in
Ground Clearance – LGP13 in
Ground Clearance – LGP, 770 mm (30 in) shoes13 in
BLADE: Blade Width – XL109.5 in
BLADE: Blade Width – Intermediate115 in
BLADE: Blade Width – LGP126.7 in
BLADE: Blade Height – XL42.2 in
BLADE: Blade Height – Intermediate39.8 in
BLADE: Blade Height – LGP39.8 in
BLADE: Blade Lift Height – XL30.2 in
BLADE: Blade Lift Height – Intermediate30.2 in
BLADE: Blade Lift Height – LGP30.2 in
BLADE: Digging Depth – XL23.1 in
BLADE: Digging Depth – Intermediate22.5 in
BLADE: Digging Depth – LGP22.5 in
BLADE: Blade Cutting Edge Angle, Adjustable – XL52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable – Intermediate52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable – LGP52° to 58°
BLADE: Maximum Tilt – XL15.8 in
BLADE: Maximum Tilt – Intermediate17.6 in
BLADE: Maximum Tilt – LGP17.6 in
BLADE: Maximum Angle (either side) – XL25°
BLADE: Maximum Angle (either side) – Intermediate25°
BLADE: Maximum Angle (either side) – LGP25°
BLADE: Blade Width at Maximum Angle – XL103.8 in
BLADE: Blade Width at Maximum Angle – Intermediate105.1 in
BLADE: Blade Width at Maximum Angle – LGP115.8 in
BLADE: Blade Capacity (SAE) – XL2.86 yd3
BLADE: Blade Capacity (SAE) – Intermediate2.73 yd3
BLADE: Blade Capacity (SAE) – LGP3.06 yd3
ELECTRICAL
  • Alternator, 12 volt, 120 Amp, heavy duty brushless
  • Alarm, backup
  • Batteries (2), heavy duty, maintenance free, 2,000 CCA
  • Diagnostic connector
  • Horn, electric
  • Lights, halogen, 2 front and 2 rear
  • Starter, electric, 12 volt
OPERATOR STATION
  • ROPS/FOPS canopy
  • Seat, air suspended, cloth or vinyl
  • Seatbelt, retractable 76 mm (3 in)
  • Foot pads, dash
  • Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic – Water-in-fuel indicator, electronic
  • Slope Indicate
  • Throttle switch, rotary
  • Eco mode
  • Controls, seat mounted, fore/aft adjustment
  • Armrests, adjustable
  • Mirror, rearview, inside
  • Single pedal combining deceleration and braking functions
  • Independent forward/reverse speed settings
  • Power port, 12 volt
  • Coat hook
  • Storage compartment
  • Cup holder
  • Floor mat, rubber, heavy duty
HYDRAULICS
  • Hydraulics, 3 valve
  • Load sensing hydraulics
  • Single lever, three function control
  • Hydraulic pump and oil
  • Stable blade control
POWER TRAIN
  • Cat C4.4 ACERT diesel engine, turbocharged, Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
  • Aftercooler, Air-to-Air (ATAAC)
  • Aluminum bar plate cooling system (radiator, power train)
  • Air cleaner with precleaner, automatic dust ejection and under-hood intake
  • Dual path, closed-loop hydrostatic transmission
  • Electric fuel priming pump
  • Fuel/water separator
  • Automatic Traction Control
UNDERCARRIAGE
  • SALT Undercarriage
  • 7 roller track frame
  • Track rollers, lifetime lubricated
  • Carrier rollers
  • Track adjusters, hydraulic
  • Guards, front/rear guiding
  • Master link
OTHER STANDARD EQUIPMENT
  • Cat Product Link™ PL631 Satellite/PL641 Cellular
  • C-Frame, VPAT, hydraulic cylinders and lines
  • Lockable engine enclosures
  • Front pull device
  • Rigid drawbar
  • Ecology drains (engine, power train and implement oil and engine coolant)
  • Scheduled oil sampling ports (engine, power train implement oil)
  • Vandalism protection
  • Heavy duty crankcase guard
ANTIFREEZE
  • Extended life coolant, –37° C (–35° F)

listofrelationships

small_image

small_image

small_image

small_image

small_image

small_image

small_image

small_image

small_image

small_image

small_image

Other Models in this Category

Select Product Category

Why Cat is Better. Machine Comparison

"
80 percent of our heavy equipment fleet is Caterpillar. We are extremely satisfied with Hawthorne Cat’s service and staff. Hawthorne Cat is the obvious choice for our equipment needs - now and in the future.”
Sam Wathen
SC Valley Engineering, Inc
"

San Diego
Ross Farmer
Sales Manager
858.674.7048 office
760.815.4094 mobile
rfarmer@hawthornecat.com

Hawaii
Bobby Whitworth
General Manager
808.676.0353 office
808.864.5147 mobile
bwhitworth@hawthornecat.com