New | D11T/D11T CD Dozer

Cat® large dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. By optimizing performance and simplifying serviceability with our modular design, our machines move more material efficiently and safely at a lower cost per ton. These models include safety enhancements, improved operator comfort, and productivity increasing electronic features to keep your business strong for generations to come.

Engine
Engine ModelCat® C32 ACERT™
Flywheel Power850 HP
Bore5.7 in
Stroke6.4 in
Displacement1959 in³
EmissionsU.S. EPA Tier 4 Final
Engine Power - Gross SAE J1995*913 HP
Engine Power - ISO 14396908 HP
Engine Power - Net SAE J1349/ISO 9249850 HP
Net SAE J1349/ISO 9249850 HP
Note (1)* Excludes all fan losses.
Note (2)Engine ratings apply at 1,800 rpm.
Note (3)Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Note (4)No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
Weights
Operating Weight229800 lb
Shipping Weight82640 lb
Operating Weight - CD248500 lb
Shipping Weight - CD83340 lb
Note (1)D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note (2)D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
Note (3)D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
Note (4)D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
Transmission
1 Forward2.4 mile/h
2 Forward4.2 mile/h
3 Forward7.3 mile/h
1 Reverse2.9 mile/h
2 Reverse5.1 mile/h
3 Reverse8.7 mile/h
TypePlanetary powershift
Transmission Clutch Diameter21 in
Hydraulic Controls
D11T - Bulldozer Relief Valve Setting3300 psi
D11T - Combined Pump Output - Implement164 gal/min
D11T - Pump TypeGear-type pump
D11T - Ripper (Lift) Relief Valve Setting3300 psi
D11T - Ripper (Pitch) Relief Valve Setting3300 psi
D11T - Tilt Cylinder Relief Valve Setting3525 psi
D11T - Tilt Pump Flow41 gal/min
D11T CD - Carrydozer Relief Valve Setting3500 psi
D11T CD - Pump Output - Implement177 gal/min
D11T CD - Pump TypeGear-type pump
D11T CD - Ripper (Lift) Relief Valve Setting3500 psi
D11T CD - Ripper (Pitch) Relief Valve Setting3500 psi
D11T CD - Tilt Cylinder Flow66 gal/min
D11T CD - Tilt Cylinder Relief Valve Setting3600 psi
Note (1)Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).
Note (2)Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Note (3)Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
Undercarriage
Shoe TypeExtreme Service
Width - Shoe28 in
Shoes/Side41
Grouser Height4 in
Pitch12.5 in
Track Gauge114 in
Length - Track on Ground175 in
Ground Contact Area9781 in²
Track Rollers/Side8
Number of Carrier Rollers1 per side (optional)
Ground Clearance*30.6 in
Ground Contact Area - CD12605 in²
Width - Shoe - CD36 in
Note (1)* Includes grouser height for total dimensions on hard surface.
Note (2)Sleeve Bearing Track with Positive Pin Retention.
Service Refill Capacities
Fuel Tank425 gal (US)
Cooling System71.1 gal (US)
Engine Crankcase*27.2 gal (US)
Power Train90.9 gal (US)
Final Drive - Each12.4 gal (US)
Roller Frames - Each24.8 gal (US)
Pivot Shaft Compartment18.8 gal (US)
Implement Hydraulic System - Tank Only58.9 gal (US)
Fuel Tank - High Capacity505 gal (US)
Fuel Tank - Platform Ready470 gal (US)
Note* With oil filters.
Track Roller Frame
Oscillation13.8 in
Steering and Brakes
Hydraulically Applied Multiple-disc Steering Clutch17.3 in
Spring Applied Multiple-disc Brake24.1 in
Standards
FOPSFalling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
ROPSRollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
Sound (1)The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with th
Sound (2)The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).
Dimensions (Approximate) - D11T
Drawbar Height (Center of Clevis)*37.1 in
Ground Clearance*31.4 in
Height - FOPS Cab*173.4 in
Height - ROPS/Canopy*185.9 in
Height - Top of Stack*179.1 in
Length - Basic Tractor - With Drawbar242.5 in
Length - Track on Ground175 in
Length - With Multi-Shank Ripper331.8 in
Length - With SU-Blade337.8 in
Length - With Single-Shank Ripper319.2 in
Length - With U-Blade340.2 in
Note (1)*Includes grouser height for total dimensions on hard surfaces.
Note (2)D11T shown equipped with 710 mm (28 in) shoes.
Overall Length - Basic Tractor242.5 in
Overall Length - SU-Blade/SS Ripper414.4 in
Track Gauge114 in
Width - Over Trunnions172.4 in
Width - Without Trunnions - Standard Shoe148.9 in
Dimensions (Approximate) - D11T CD
Drawbar Height (Center of Clevis)*37.1 in
Ground Clearance*31.4 in
Height - FOPS Cab*173.4 in
Height - ROPS/Canopy*185.9 in
Height - Top of Stack*179.1 in
Length - Basic Tractor - With Drawbar242.5 in
Length - Track on Ground175 in
Length - With Multi-Shank Ripper331.8 in
Length - With SU-Blade**345.1 in
Length - With Single-Shank Ripper319.2 in
Note (1)*Includes grouser height for total dimensions on hard surfaces.
Note (2)**CD Blade on D11T CD.
Note (3)D11T shown equipped with 710 mm (28 in) shoes.
Overall Length - Basic Tractor242.5 in
Overall Length - SU-Blade/SS Ripper**421.7 in
Track Gauge114 in
Width - Over Trunnions172.4 in
Width - Without Trunnions - Standard Shoe149.8 in
  • Structures
  • Engine
  • Emissions Technology
  • Cooling System
  • Power Train
  • Undercarriage
  • Operator Station
  • Integrated Technologies
  • Cat Minestar
  • Safety
  • Work Tools
  • Serviceability
  • Customer Support
  • Sustainability

Standard Equipment

ELECTRICAL
  • Alternator, 150 amp
  • Back up alarm
  • Batteries, 12-volt (4), 200 amp-hour
  • Converters, 12-volt, 10 amp and 20 amp
  • Diagnostic connector
  • Horn, forward warning
  • Lights, engine compartment
  • Lighting system, five (5) HID/seven (7) Halogen
  • Starting receptacle
OPERATOR ENVIRONMENT
  • Advisor-electronic monitoring system
  • Air conditioner and heater
  • Armrest, adjustable
  • Cab, FOPS
  • Deactivation switch, hydraulic controls
  • Decelerator, pedal
  • Finger Tip Control (FTC) steering
  • Governor switch, electronic
  • Hydraulic system: – Electronically controlled for bulldozer and ripper control
  • Mirror, rearview
  • Radio ready, entertainment
  • ROPS rollbar
  • Seat belt, retractable 76 mm (3 in)
  • Seat, cloth, air suspension
  • Wipers, intermittent, low and high speeds
POWER TRAIN
  • C32 with ACERT Technology
  • Aftercoolers, air-to-air
  • Air filters, dual with precleaner
  • Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG
  • Controlled throttle shifting
  • Coolant, extended life
  • Shift management
  • Engine Idle Shutdown Timer
  • Engine precleaner
  • Ether starting aid, automatic
  • Four planet, double-reduction planetary final drives
  • Fuel priming pump, electric
  • High speed oil changing system
  • Hydraulic demand fan
  • Copper Grommetted Tube Radiator - Serial number prefix JEL and JNS
  • Mufflers, dual
  • Parking brake, electronic
  • Prescreener
  • Separator, water/fuel
  • Thermal shields
  • Torque divider
  • Transmission, powershift: – (3F/3R speeds)
TECHNOLOGY
  • Auto blade assist
  • Enhanced auto shift
  • Product Link (satellite)
  • VIMS 3G
UNDERCARRIAGE
  • Equalizer bar end pin grease fittings, remote
  • Rollers and idlers, lifetime lubricated
  • Sprocket rim segments, replaceable
  • Suspension-type undercarriage, eight-roller tubular track roller frame
  • Three bolt idler and roller caps
  • Track adjusters, hydraulic
  • Track guides
  • Two-piece master links
SAFETY AND SECURITY
  • Anchorage points
  • Fender guard rails
  • Heavy duty steps and handles
  • Operator not present monitoring system
  • Slope and side-slope monitor
OTHER STANDARD EQUIPMENT
  • Bottom guards
  • CD ROM parts book
  • Dual-tilt blade control
  • Ecology drains
  • Engine enclosure
  • Fluid sampling ports
  • Grade control ready
  • Ground level service center
  • Ripper Hydraulics
  • Vandalism, protection (8 caplocks)

Optional Equipment

GUARDS
  • Bottom guards, sealed
  • Bottom guards, partial
  • Guard, undercarriage idlers
  • Screens, grill door
OPERATOR STATION
  • Air conditioner: – Fender – ROPS
  • Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant
  • Heated and ventilated seat
  • Operator arrangement: – 5th percentile arrangement – Quick opening
  • Powered precleaner
  • Visibility arrangements (camera and mirrors): – Single camera – Dual camera – Mirrors
  • Window shades
POWER TRAIN
  • Engine coolant, arctic
  • Engine precleaner, turbine
  • Engine prelube
  • Fan arrangements: – Hydraulic screens – Reversing (Not available on D11T Carrydozer.) – Reversing with screens (Not available on D11T Carrydozer.)
  • Final drives: – Clamshell guard
  • High altitude arrangement (Not available on D11T Carrydozer.)
  • Copper Grommetted Tube Radiator - Serial number prefix AMA and MDG
  • Remote power train and engine high speed oil change system located at the ground level service center
UNDERCARRIAGE
  • Carrier rollers
  • Carrier rollers – cold weather
  • Tracks, PPR, sealed and lubricated: – 710 mm (28 in) Extreme Service (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service abrasion resistant material (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service trapezoidal hole (No
  • Undercarriage arrangements: – Abrasion – Cold abrasion – Cold weather – Sound
BULLDOZER ATTACHMENTS
  • 11CD Abrasion resistant blade
  • 11CD No wear plate
  • 11SU Abrasion resistant blade (Not available on D11T Carrydozer.)
  • 11SU Abrasion resistant blade, black (Not available on D11T Carrydozer.)
  • 11SU No wear plate (Not available on D11T Carrydozer.)
  • 11U Abrasion resistant blade (Not available on D11T Carrydozer.)
  • 11U Abrasion resistant blade, black (Not available on D11T Carrydozer.)
  • 11U No wear plate (Not available on D11T Carrydozer.)
REAR ATTACHMENTS
  • Counterweight, rear
  • CapSure hammerless installation and positive retention system: – Single shank – Multi shank – Single shank deep
  • Drawbar, rear (Not available on D11T Carrydozer.)
  • Multi shank ripper: – Carrydozer – Leach Pad (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
  • Ripper lube
  • Single shank ripper: – Carrydozer/heavy – Push block (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
TECHNOLOGY
  • Command for Dozing (Installed by dealer.)
  • Machine control, performance: – AutoCarry – Automatic ripper control
  • Terrain for Grading: – With blade control
SAFETY AND SECURITY
  • Access arrangement (ladder and platform)
  • Fuel tank: – Platform ready – Extra capacity
  • Lights: – LED – LED, high intensity – Warning, strobe
  • Powered access ladder
  • Rear access platform
OTHER ATTACHMENTS
  • Automatic lubrication system
  • Grease points, grouped
  • Heater, engine coolant
  • Heater, fuel
  • Hydraulic lines, AutoCarry
  • Hydraulic lines, screens
  • Hydraulic lines, screens and AutoCarry

listofrelationships

original

original

original

original

original

original

original

original

original

Other Models in this Category

Select Product Category