New | 301.7D CR Mini Hydraulic Excavator

The new Cat® 301.7D CR gives you a blend of power, control and stability to make your working day easier and more productive.

Engine
Engine ModelYanmar 3TNV76
Net Power17.7 hp
Displacement40.0 in3
Gross Power (ISO 14396)24.3 hp
Rated Net Power @ 2,200 rpm (ISO 9249)17.7 hp
Weights
Operating Weight3726.0 lb
Operating Weight with Canopy3726.0 lb
Transport Weight with Canopy3550.0 lb
Travel System
Gradeability30°/58%
Travel Speed2.8 km/h-5.6 km/h (1.74 mph-3.48 mph)
Hydraulic System
Operating Pressure - Equipment3481.0 psi
Operating Pressure - Travel3481.0 psi
Operating Pressure - Swing2610.0 psi
Auxiliary Circuits: Primary and Secondary Auxiliary Circuits - Maximum Flow9.0 gal/min
Auxiliary Circuits: Primary and Secondary Auxiliary Circuits - Maximum Pressure3335.0 psi
Maximum Bucket Force3190.0 lb
Maximum Stick Force - Long Stick4640.0 lb
Maximum Stick Force - Standard Stick1890.0 lb
Pump Flow @ 2,200 rpm10.5 gal/min
Blade
Height9.0 in
Dig Depth15.0 in
Lift Height11.0 in
Width990 mm/1300 mm (3 ft 3 in/4 ft 3 in)
Service Refill Capacities
Fuel Tank Capacity5.0 gal
Hydraulic Tank Capacity5.3 gal
Dimensions (Approximate) - Long Stick
Boom Swing Angle (LH)65°
Boom Swing Angle (RH)57°
Height7.75 ft
Length of Undercarriage (Extending)5.27 ft
Maximum Boom Offset (LH)1.37 ft
Maximum Boom Offset (RH)1.75 ft
Maximum Dig Height11.64 ft
Maximum Digging Depth8.14 ft
Maximum Dozer Dig Depth1.28 ft
Maximum Dozer Lift Height11.0 in
Maximum Dump Height8.38 ft
Maximum Reach at Ground Level13.11 ft
Maximum Vertical Dig Depth5.64 ft
Tail Swing Radius660 mm/722 mm (2'1"/2'4")
Transport Length (Arm Lowered)11.76 ft
Undercarriage Width (Extended)4.27 ft
Undercarriage Width (Retracted)3.25 ft
Width2.4 ft
Operating Specifications
Counterweight110.0 lb
Stick Length - Long43.2 in
Stick Length - Standard37.1 in
Dimensions (Approximate) - Standard Stick
Boom Swing Angle (LH)65°
Boom Swing Angle (RH)57°
Height7.75 ft
Length of Undercarriage (Extending)5.27 ft
Maximum Boom Offset (LH)1.37 ft
Maximum Boom Offset (RH)1.75 ft
Maximum Dig Height11.27 ft
Maximum Digging Depth7.61 ft
Maximum Dozer Dig Depth1.28 ft
Maximum Dozer Lift Height11.0 in
Maximum Dump Height8.0 ft
Maximum Reach at Ground Level12.6 ft
Maximum Vertical Dig Depth5.18 ft
Tail Swing Radius660 mm/722 mm (2'1"/2'4")
Transport Length (Arm Lowered)11.76 ft
Undercarriage Width (Extended)4.27 ft
Undercarriage Width (Retracted)3.25 ft
Width2.4 ft

Productivity in confined areas with zero tail swing

The zero tail swing Cat 301.7D CR can work comfortably in confined work areas with the machine upper frame able to slew within its track width. This compact radius design also allows you to concentrate on the work being performed without having to worry about damage to the back of the machine or site.

Extending Undercarriage

Fitted with an extending undercarriage and fold out dozer blade as standard, the machine can gain access into most areas when fully retracted to 990 mm (3 ft 3 in), and once extended to its full 1300 mm (4 ft 3 in) working width the undercarriage affords excellent stability for even greater digging and loading performance.

Flexibility built in for a variety of jobs

Hammer Lines as Standard

Hammer and two-way auxiliary hydraulic lines with quick disconnects allow the operation of a hydraulic hammer and of a bi-directional tool such as an auger. The optional second hydraulic function is operated by a proportional roller on the left-hand joystick. This option includes a switch that allows the operator to vary the auxiliary hydraulic flow to suit each individual work tool.

The ‘ready to work’ quick disconnect connections are equipped with an accumulator as standard to help make releasing and changing of tools a quick and easy task. Located close to the work tool, they reduce hose lengths and minimize potential damage.

Additional Counterweight

An optional additional weight increases the machines lifting capability with only a small addition to the overhang. This is an ideal option when heavy hydra mechanical tools are being used.

Dig Depth/Reach

The choice of two stick lengths allows you to configure your machine to deliver either high stick force or greater reach. Dig depths are set to give good trenching for utility pipe work and cables.

Sturdy hoisting points on the canopy roof enable the easy, safe and rapid relocation of the machine between sites or for loading of the machine onto a trailer.

A range of work tools is available including buckets, hammer and auger to take advantage of the machines versatility. All these tools are matched to optimize machine performance and deliver excellent value through productivity and long life.

Simple, easy operation allows the operator to focus on production

Controls

  • Ergonomically laid out operator station with pilot operated joystick and foot pedal. All functions are pilot controlled to deliver excellent control and eliminate the need for maintenance of cables and linkages.
  • The adjustable suspension seat provides a comfortable operating position and lifts to provide additional engine access.
  • Retractable seat belts ensure that they are kept in good condition and ready to wear for your safety and comfort.
  • Safety Lock Out - All machine controls are disabled by raising the control pod for safe and controlled machine starting.
  • The optional rear weather panel gives protection from wind and rain on the operator’s back while working.

A roof panel allows the operator to see the bucket at height giving better and safer loading operations with less operator effort.

Adjustable wrist rests reduce fatigue by positioning to best suit your preferred operating position.

Travel foot bars are provided as standard to make moving around site easy and effortless. Ideal for traveling over longer distances or when you wish to operate the front linkage at the same time.

Powerful engine with load sensing hydraulics and minimal maintenance

Powerful Engine and Load Sensing Hydraulics

The 17.7 kW (24 hp) engine is matched with a load sensing hydraulic system and variable displacement pump to provide excellent digging performance and smooth control. No stall under load and power when needed make the 301.7D CR very productive for such a compact package.

Excellent Service Access

Daily checks and regular service points including fuel and hydraulic oil fill are easily reached via the large steel rear door and removable side panels. The main hydraulic valve and lines are also easily reached through a removable floor plate and side panels. The machine has durable steel body panels all around, offering good resistance to impact damage and helping to maintain the machine’s appearance and value.

Customer Support - Unmatched Support Makes the Difference

Your Cat dealer is ready to assist you with your purchase decision and everything after.

  • Financing packages are flexible to meet your needs.
  • Unmatched parts availability keeps you working.
  • Make comparisons of machines, with estimates of component life, preventative maintenance and cost of production.
  • For more information on Cat products, dealers services and industry solutions, visit www.cat.com.

230 mm rubber track
Canopy - ROPS and TOPS protection
Dozer blade
Extending undercarriage
Hammer/2 way lines
Hydraulic oil cooler
Maintenance free battery
Retractable seat belt
Standard stick
Suspension seat, vinyl covered
Travel steering bars
Working light mounted to boom

listofrelationships

small_image

small_image

Other Models in this Category

Select Product Category

Hot Deals - Buy New. Buy Now. We'll Make Your Down Payment. Learn More.

Why Cat is Better. Machine Comparison

"
80 percent of our heavy equipment fleet is Caterpillar. We are extremely satisfied with Hawthorne Cat’s service and staff. Hawthorne Cat is the obvious choice for our equipment needs - now and in the future.”
Sam Wathen
SC Valley Engineering, Inc
"

San Diego
Ross Farmer
Sales Manager
858.674.7048 office
760.815.4094 mobile
rfarmer@hawthornecat.com

Hawaii
Bobby Whitworth
General Manager
808.676.0353 office
808.864.5147 mobile
bwhitworth@hawthornecat.com