New | MH3037 Wheel Material Handler - Millyard Arrangement
We know that when it comes to material handling equipment, your success depends on high productivity and dependable performance. The new Cat MH3037 Material Handler is designed where harsh environments and severe duty applications of millyard, industrial, scrap recycling, and bulk handling operations call for safe, quality and reliable products. The MH3037 is a purpose-built material handler from the ground up. Everything about this machine is designed to do one thing well – move material.
|Engine Model||Cat® C7 ACERT™|
|Emissions||Tier 3/EU Stage IIIA|
|Fuel Capacity||110.0 gal|
|Maximum Torque @ 1,400 rpm||758.2 lbf-ft|
|Net Power (ISO 9249)||225.0 hp|
|Operating Weight||37 600 kg (82,900 lb)|
|Stick (long)||5464.0 lb|
|Stick (short)||4956.0 lb|
|Maximum Travel Speed||12.4 mph|
|Creeper Speed||3.3 mph|
|Controls||Electro/hydraulic pilot controls|
|System Capacity||160.0 gal|
|Tank Capacity||100.0 gal|
|Swing Torque||62000 lbf-ft|
|Swing Speed||8.2 rpm|
|Maximum Swing Pump Flow||37 gal/min|
|Swing System||Closed loop hydrostatic system with electro-proportional controls|
|Shipping Width||11.1 ft|
|Tail Swing Radius||10.3 ft|
|Counterweight Clearance||5.2 ft|
|Wheel Base||9.8 ft|
|Cab Clearance – Lowered to Ground*||9.5 in|
|Cab Height – Raised to Top of FOGS Guard||19.3 ft|
|Cab Height – Transportation||10.9 ft|
|Note||*Factory set at 242 mm (9.5") – adjustable through the operating system to be lower or higher.|
|Shipping Height||10.9 ft|
|Shipping Length||41.3 ft|
|Stabilizer Width on Ground||16.2 ft|
|Undercarriage Length||21.4 ft|
|Undercarriage Width||10.2 ft|
|Undercarriage (Pneumatic Tires)|
|Ground Clearance at Lowest Point||15.4 in|
|Minimum Turning Radius (inside)||33.1 ft|
|Oscillation Axle Angle||±2.6 degrees|
|Service Refill Capabilities|
|Cooling System||9.5 gal|
|Engine Crankcase with Filter||7.4 gal|
|Final Drive (each)||1.6 gal|
|Fuel Tank||110.0 gal|
|Hydraulic System (including tank)||160.0 gal|
|Hydraulic Tank||100.0 gal|
|Hydraulic System: Maximum Pressure|
|Auxiliary Circuit: Medium Pressure – Factory Setting||2200 psi|
|Auxiliary Circuit: Medium Pressure – Maximum Allowable Relief Setting||2500 psi|
|Implement Circuit||4600 psi|
|Swing Circuit||5500 psi|
|Travel Circuit||4800 psi|
|Outriggers (Pneumatic Tires)|
|Ground Penetration||8 in|
|Hydraulic System: Maximum Flow|
|Auxiliary Circuit – High Pressure||55 gal/min|
|Auxiliary Circuit – Medium Pressure||20 gal/min|
|Implement Circuit||137 gal/min|
|Operating Temperature||60-73° C (140-164° F)|
|Millyard Arrangement – Maximum Reach||47.2 ft|
|Millyard Arrangement – Maximum Height||53.8 ft|
|Millyard Arrangement – Maximum Depth||11.8 ft|
|Maximum Drawbar Pull||32588 lb|
|Maximum Weight of the Trailer and Payload||110250 lb|
Commitment from the Ground Up
Recognizing that fuel efficiency is directly affected by hydraulic performance, the hydraulic system in the MH3037 is carefully designed to provide the work needed without wasting fuel. A high capacity hydraulic cooling system keeps operating temperatures low, resulting in longer component life, higher efficiency and lower repair cost.
You expect quality and durability. The MH3037 is purpose-built from the ground up with frame construction that utilizes continuous welds, extensive chamfering, “feathered” weld end points and radiused corners. Critical areas use high grade structural steel, and areas susceptible to side loading have pins oversized by 15%-20%, with threaded retention. To withstand extreme loads encountered in material handling applications, both the boom and the stick are built from single piece continuous top and side plates – no seams or baffles.
Effective operator and machine communication is critical in any job application to ensure productivity. The MH3037 features Cat Product Link™ in conjunction with a user-friendly operating system that clearly communicates machine conditions in plain language, no need to research code definitions. In addition, the in-cab monitor reports machine conditions, warnings and maintenance checks. Operators can adjust machine functions, such as joystick control sensitivity through the operating system.
Lower Operating Cost
Low operating cost was one of the top priorities throughout the MH3037’s design phase. The combination of extending component life, optimizing fuel efficiency and an innovative hydraulic system all work together to provide the lowest possible operating cost.
Safety and Comfort
Decrease the risk for slips and falls with the patented “ground entry and exit” hydraulic cab riser system. This innovative system will lower the cab to ground level for operator entry and exit. This is one of many features the MH3037 brings to improve the safety and comfort of your operations.
More Power and Efficiency
More power when you need it, the Cat C7 ACERT large displacement engine optimizes machine performance and enhances fuel efficiency while meeting Tier 3/Stage IIIA emission regulations. The C7 is a 7.2 L (442 in3), in-line 6 cylinder engine rated at 168 kW (225 hp). This market proven Cat engine produces enough power to run simultaneous machine operations.
Precise Engine Control
The ADEM™ A4 (Advanced Diesel Engine Management) provides quick response to engine demands. Utilizing flexible fuel mapping, the ADEM A4 electronically controlled fuel module monitors performance with sensors in the air intake, fuel, exhaust and cooling system to produce higher efficiency and lower emissions.
Fuel Delivery Technology
The Cat C7 ACERT features electronic controls that govern mechanically actuated unit fuel injection system. With a carefully designed combustion cycle, the C7 lowers emissions produced and improves fuel economy.
Powerful Engine Cooling System
The MH3037’s engine cooling system adjusts to demands of work applications. Rated for a 168 kW (225 hp) engine, the cooling system incorporates a variable pitch, auto-reversing Flexxaire cooling fan that runs on set intervals to purge debris from the cooling system, extending component life.
Enhanced Fuel Efficiency with Auto Throttle
Fuel can drastically affect your businesses’ operating cost. The fuel saving auto throttle feature reduces the engine rpm back to idle after five seconds of inactivity, decreasing fuel consumption.
Dependable Power Train
True four wheel drive with limited slip differentials front and rear provide excellent maneuvering performance even on unimproved terrain. Power is provided by a variable displacement hydraulic motor through a 2-speed transmission which drives the two axles. Oscillating rear housing with lock-out feature and pneumatic tires provide machine stability and traction.
Machine movement is regulated through a two mode shift on the fly travel system that includes a creeper mode up to 5.3 km/h (3.3 mph) and a standard mode up to 20 km/h (12.4 mph). Steering and speed are controlled through the joystick controls while forward and reverse direction is controlled through a right foot pedal.
Effective Hydraulics – Improve Your Machine’s Performance
Machine productivity depends on hydraulic performance. The MH3037’s hydraulic system is designed to provide power without compromising efficiency, and protect component life to keep your machine running.
Proper power distribution on the MH3037 allows you to run simultaneous operations without compromising performance or efficiency. The main pump system produces hydraulic power for the implements, work tools, travel and cab riser systems. A dedicated closed loop swing system provides swing priority at all times, providing improved power management and performance.
Low Operating Temperatures
Running at lower operating temperatures protects component life. The MH3037’s hydraulic system is cooled through its own cooler mounted side-by-side with the engine radiator and air-to-air aftercooler (ATAAC). Mounting these cores side-by-side improves cooling efficiency and allows for easier cleaning of the cores in dirty environments. The variable pitch auto-reversing fan assists in keeping the cores operating at peak efficiency and minimizing downtime for cleaning.
Fast Cycle Times
Faster cycle times increase productivity. An efficient load sensing hydraulic system supplies quick lift and implement performance while providing control regardless of boom, stick or travel demands. The dedicated hydrostatic swing system ensures that swing speed is not affected by other machine functions.
Operating costs are cut with flow management technologies. Flow‑sharing compensation delivers flow on-demand for smooth, efficient operations, regardless of load. A load sensing pump generates only the flow and pressure required to meet system demands based on the work being done.
Built Quality – Structural Integrity
Your operators face harsh working environments that can affect the durability of your equipment. With this in mind, the MH3037 was built beyond industry standards. Structures were subjected to extensive strain gauge testing and finite element analysis to ensure built quality and durability. Not cutting any corners, structural grade steel is used, and in critical areas, high grade structural steel is used. Built to last, the MH3037 has continuous welds along with chamfering and feathering techniques. Pins and bushings are oversized to prevent stress failures and lubricated through the automatic lubrication system to enhance component durability.
The MH3037’s frame is divided into an upper and lower portion. The upper frame houses the hydraulic cab riser, counterweight, boom, engine and hydraulic system. The upper frame attaches to the lower frame through the MH3037’s rotating axis. The lower frame is high off the ground to prevent any materials from dragging and the design is tapered to evenly distribute the weight on its four outriggers. The hydraulic cab riser linkage is integrated into the left front corner of the upper frame for rigid support providing the operator with a stable work platform. Less maintenance is required with greaseless bearings in the cab riser linkage.
The MH3037 is meant to be an integral part of your operations for many years to come, built strong with thick plates, radiused corners and detailed welds.
Durability – Built with No Compromises
You know that a material handler works only as well as its front linkage is able to handle the job. The MH3037’s boom and stick are purpose built for the loads encountered in log handling applications. Careful and detailed handling of stresses ensures that the MH3037 has the durability you need for your day-to-day operation. The boom and stick top and side plates are manufactured from single plates of steel to eliminate the need for internal baffles and cross boom weld joints. Feathered welds and strengthened connections compliment the structural integrity of the front linkage. Automatic lubrication on linkage pins and bushings extend component life, protecting your investment. Excellent lift performance is delivered with dual boom cylinders and stick cylinders. The 8.84 m (29'0") boom and the drop nose stick 5.8 m (19'0") provides a horizontal reach of 14.4 m (47'4") and a large working envelope, minimizing machine travel and reducing down operation costs.
Efficiently Operate and Manage Your Machine
Manage Assets with Cat Product Link
Product Link helps you take the guesswork out of equipment management. With timely, useful information, you can better manage your assets and costs. Through the powerful, web-based VisionLink® application you have access to remote monitoring of equipment – see hours and location, site boundaries and maintenance management. When you know where and when your equipment is running, you can manage your fleet more efficiently and effectively. It pays to know Cat Product Link. Consult your Cat dealer for availability of this option.
Keep track of important maintenance with sensors in air filters and hydraulic filters. Warnings are displayed if maintenance is needed. Additional maintenance checks are based on time intervals, and maintenance logs are saved on the operating system.
From the operator screen, all electronic inputs and outputs can be viewed to verify that they are working correctly. Engine fault codes, hydraulic pressure spikes and operating system diagnostic faults are logged.
Your operators can adjust main machine functions to accommodate their preferences. Standard and eco modes optimize operator comfort and efficiency.
No need to look up what codes mean, the MH3037 will display in plain language machine settings, controls, faults and warnings. User-friendly communications allow for your operators to be focused on the job at hand.
Built for Your Comfort
Operate the MH3037 with less fatigue and greater comfort. The operator station is ergonomically designed to provide a quiet, safe and comfortable work environment. Highly visible monitors, easily accessible switch consoles and operating controls reduce fatigue for your operator. With large windows and joystick controlled steering the MH3037 cab provides ideal job site visibility.
Comfort with the Cat D Series Cab
Comfortable operators make productive operators, which is why the MH3037 is equipped with our Cat D Series cab. The interior of the cab is spacious, and controls are ergonomically located within comfortable reach for the operator. This sturdy operator station features window panes that are attached directly onto the frame eliminating the need for sills that may be visual obstacles and weak stress points. Operators will feel less fatigued after a day of work in the air-ride suspension seat with adjustable arm rests.
Convenient Cab Riser
Avoid unnecessary hassles and potential injuries. Start your day walking into the cab at ground level with our innovative hydraulic cab riser system. The cab riser can reach a height of 5.5 m (18'0") (eye level) in approximately 8 seconds, and come back to the ground in approximately 10 seconds.
Increased Productivity with Electronic Joystick Controls
Experience smoother, faster production with electronic joystick controls. Customizable machine functions allows the machine to be fine tuned to operator preferences.
Efficient Servicing for More Productivity
Primary service points are easily accessible through convenient panels and platforms on the sides and top of the machine. Components can be easily located with the engine and cooling system’s longitudinal layout. Panels are hinged with gas struts, ensuring that one technician can easily access all maintenance points.
Purposefully designed, the spacious and lighted compartments allow for technicians to maneuver easily while accessing the engine, cooling system, hydraulic components and filters for maintenance and inspection.
Labeled Service Points
The guesswork has been taken out of identifying key hydraulic hoses and electrical wiring with name labels to ease maintenance.
Machine life is improved and operating costs are lowered by having the machine in charge of timely lubrication intervals. Upper auto-lube sends grease based on duration runtime. The machine is factory set to run grease point lubrication every 10 minutes of use. The lower is manually lubricated from a central grease point located behind the lower control valve on the carbody frame.
Guards, Railings and Anti-Slip Surfaces
Being able to safely service machinery is a primary concern for all owners. Equipped with handrails and anti-slip surfaces, technicians can safely perform inspections and maintenance.
Your Safety Is Our Priority
Optional Falling Object Guard System (FOGS)
Falling and flying debris is one of the hazards of the workplace. To protect your operator, the MH3037 can come equipped with the impact-absorbing cab guard that conforms to ISO 10262 safety standards. The Falling Object Guarding System consists of both a top and front guard.
High Operator Visibility
The ability to see your work area is critical to a safe working environment. The cab is purposefully designed to provide high visibility and ensure that the operator can view his work area. The cab includes a polycarbonate skylight, removable window panes and a rear window that serves as an emergency exit. Joystick controls in lieu of a steering wheel provide a less obstructed front view. In addition, a cab mounted windshield wiper improves operator visibility in wet weather conditions.
Having line of sight to what is happening behind the machine is vital in maintaining a safe work environment, which is why a rearview camera is mounted on the counterweight. The live audio and video transmission is fed through the HD color monitor in the cab.
Maintain safe working distances with the stick limiter, which prevents the work tool from coming into close proximity to the operator station. Function override controls allow for up close work.
Ground Access Cab
You are safer from the risk of slips and falls with the MH3037’s patented ground entry and exit cab riser system. In the event of a power loss, a cab riser pressure release valve located in the operator station and at ground level allows for the cab to be lowered, enabling the operator to safely exit the machine.
MAINTAIN A CLEAN WORK STATION, SAFELY, CONVENIENTLY
Commitment to Your Uptime
You can maximize your machine’s uptime with the Cat worldwide dealer network. You can also decrease your repair costs by utilizing Cat remanufactured components.
What are your job requirements and machine attachments? What production do you need? Your Cat dealer can provide recommendations to help you make the right machine configuration decisions.
You can boost your profits by improving your operator’s techniques. Your Cat dealer has videos, literature and other ideas to help increase productivity. Caterpillar offers simulators and certified operator training to help maximize the return on your investment.
You can ensure lower owning and operating costs by utilizing unique Cat dealer services and financing options.
Repair, rebuild, or replace? Your Cat dealer can help evaluate the cost involved so you can make the best choice for your business.
Built for a Better Tomorrow
MH3037, powered by the Cat C7 ACERT engine, meets U.S. EPA Tier 3 and EU Stage IIIA emission standards.
Major structures and components of the MH3037 are designed to be rebuilt, to extend the life of your machinery. The remanufactured and reused parts help to reduce waste, operating cost and impact to the environment.
The combination of an efficiently designed hydraulic system and a market proven efficient engine work together on the MH3037 to provide excellent fuel economy and still deliver the power you need.
|OTHER STANDARD EQUIPMENT|
Other Models in this Category
- M318D MH - 2011, Tier 3, NACD, LACD, AUZ - 18194226
- MH3022 - 2015, Tier 4 Final, NACD - 1000001955
- MH3024 - 2015, Tier 4, NACD - 1000005629
- M325D LMH Millyard - 2014, Tier 3, Global - 1000000226
- MH3037 - 2014, Tier 3, Americas North - 18561798
- MH3037 - 2015, Tier 4 Final, Stage IV, Global - 1000001375
- MH3049 - 2013, Tier 3, Americas North - 18414746
- MH3059 - 2013, Tier 3, Americas North - 18487759
- MH3022 - 2017, Tier 4 Final, Stage IV, EU, NAm, ANZ - 1000026523
- MH3024 - 2017, Tier 4 Final, Stage IV, EU, NAm, ANZ - 1000026526
Select Product Category
- Articulated Trucks
- Asphalt Pavers
- Backhoe Loaders
- Cold Planers
- Compact Track and Multi Terrain Loaders
- Material Handlers
- Motor Graders
- Off-Highway Trucks
- On-Highway Trucks
- Road Reclaimers
- Site Prep Tractors
- Skid Steer Loaders
- Track Loaders
- Wheel Dozers
- Wheel Excavators
- Wheel Loaders
- Wheel Tractor-Scrapers