New | 24 Motor Grader

The Cat® 24 Motor Grader continues the Caterpillar tradition of being the industry leader in enabling you to build and maintain your haul roads to maximize your mine-site productivity and lower your owning and operating costs. The 24 motor grader is designed to help you get more work done in less time while keeping you safe and comfortable.

Engine
Base Power (1st gear) - Net535 hp
Engine ModelCat C27 ACERT
Bore5.4 in
Stroke6 in
Speed @ Rated Power1,000 rpm
EmissionsTier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
Torque Rise191
Peak Net Torque2417 lbf-ft
Number of Cylinders12
Base Power (1st gear) – Net (Tier 4)535 hp
Maximum Altitude at Full Power (Tier 4)10000 ft
Maximum Altitude at Full Power (Tier 2)15000 ft
Standard – Fan Speed1,325 rpm
Standard Capability122 ° F
Displacement1648 in3
NotePower as declared per ISO 14396. Rated rpm 1,800 (561 hp)
Weights
Operating Weight - Typically Equipped161695 lb
Gross Vehicle Weight – Base*: Total157769 lb
Gross Vehicle Weight – Base*: Front Axle43858 lb
Gross Vehicle Weight – Base*: Rear Axle113910 lb
Gross Vehicle Weight – Typically Equipped: Total161695 lb
Gross Vehicle Weight – Typically Equipped: Front Axle44466 lb
Gross Vehicle Weight – Typically Equipped: Rear Axle117229 lb
Note*Base operating weight calculated on standard machine configuration with 29.5R29 tires, full fuel tank, operator and ROPS cab.
Moldboard
Blade Width24 ft
Blade Height40 in
Thickness2 in
Front Frame Structure
Circle – Outer Diameter104 in
Front Axle – Wheel Lean, Left/Right18°
Front Axle – Total Oscillation per Side32°
Blade Range
Circle Centershift – Right17.2 in
Circle Centershift – Left31.7 in
Moldboard Sideshift – Right45.3 in
Moldboard Sideshift – Left38.2 in
Blade Tip Range – Forward40°
Blade Tip Range – Backward
Maximum Shoulder Reach Outside of Rear Tires – Right121 in
Maximum Shoulder Reach Outside of Rear Tires – Left121 in
Maximum Lift Above Ground16.1 in
Maximum Depth of Cut21.7 in
Air Conditioning System
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.860 metric tonne.

  • the Improved Power Train Rebuild Life, New Modular Design And New Machine Protection Features Can Save You Up To 2,400 Servicing Hours Over The Life Of The Machine.*
  • cat C27 Acert™ Engine, 533 Mm (21 In) Transmission And Lower Power Train Provide 33 Percent Additional Machine Life Before Needing To Be Rebuilt.**
  • new, Innovative Main Component Modular Design Means They Can Be Removed And Installed Quicker And Easier. Transmission And Cooling Package Can Be Removed Up To 70 Percent Faster Than The 24m.
  • fluid Service Center Provides Single Location At Ground Level For Access To Engine, Transmission, Hydraulic Oil And Coolant. This Feature, Along With Clustered Filters And Extended Service Intervals, Saves You Maintenance Time And Operating Costs.
  • hoses And Electrical Harnesses Are Split At Easily Accessible Bulkhead Locations Allowing Your Service Technicians To Work With Smaller Sections Easier And Faster.
  • ok-to-start And Critically Low Fluid Monitoring Systems Protect Your Machine By Providing Electronic Verification Of Fluid Levels And Alerting You When Low Fluid Levels Are Detected, Protecting Your Machine.

  • cat C27 Acert Engine Provides Enhanced Altitude Capabilities With No Derate Up To 3048 M (10,000 Ft) For U.s. Epa Tier 4/eu Stage Iv Emission Standards And 4572 M (15,000 Ft) For Equivalent Tier 2/stage Ii Emissions.
  • an 11 Percent Weight Increase Helps Provide More Traction And Blade Down Pressure Than The 24m.
  • consistent Power-to-the-ground Changes Real-time Engine Power Levels To Offset Cooling Fan Losses Resulting In Best Performance At All Times Independent Of Ambient Conditions.

  • fifteen Tie-off Points Located Around Engine Enclosure And Cab Provide Secure Tie Off Hooks Protecting You And Your Technicians When Performing Service Operations.
  • optional Working At Heights Package Adds An Extra Layer Of Safety By Providing Handrails And Hand Holds To Improve Access And Safety.
  • the 24 Is A Fire Suppression-ready Machine Which Means You Can Easily Install A Fire Suppression System To Further Protect Your Investment.
  • standard Rearview Camera Provides Better Visibility From The Cab To Behind The Machine While Optional Front-facing Cameras Provide Enhanced Forward And Side Visibility.
  • standard Seat Belt Indicator Provides Visual/audible Alerts When The Seat Belt Is Not In Use. The 24 Is Pre-wired So You Can Easily Install A Beacon On Top Of The Cab To Indicate Seat Belt Usage.

  • the 24 Features Asset Protection And Performance-improving Technologies Including: Engine Overspeed/underspeed, Second Generation Steering System, Articulation Estop, Ripper Auto Stow, Implements Lock Out And Circle Angle Limits, To Name A Few.
  • standard Cat Grade With Cross Slope Improves Operator Productivity And Haul Road Quality And Durability By Helping Maintain Desired Cross Slope For Appropriate Water Drainage By Automatically Controlling One Side Of The Blade.
  • the Cat 24 Is Minestar™ Ready And Includes Cat Product Link™ Elite And Vims™ To Help Optimize Equipment Management, Remote Monitoring Capabilities, Machine Availability And Component Life While Reducing Both Repair Cost And The Risk Of A Catastrophic Failure.

*life Assumed Is 64,000 Hours.

**24 Power Train Rebuild Life Target Is 16,000 Hours.

listofrelationships

small_image

small_image

small_image

small_image

small_image

small_image

Other Models in this Category

Select Product Category