New | TL642C Telehandler with Stabilizers

The TL642C is a highly versatile machine, designed to deliver maximum performance with traditional Cat reliability, durability and productivity in the toughest working conditions.

Operating Specifications
Rated Load Capacity6500.0 lb
Maximum Lift Height42.0 ft
Load at Max Height - Stabilizers Down6500.0 lb
Load at Max Height - Stabilizers Up6500.0 lb
Maximum Forward Reach30.0 ft
Load at Max Reach - Stabilizers Down1700.0 lb
Load at Max Reach - Stabilizers Up600.0 lb
Top Travel Speed20.4 mph
Engine
Engine ModelCat® C3.4B, Tier 4 Interim
Gross Power (Basic)100.6 hp
Maximum Torque - Standard302.4 lb ft
Bore4.13 in
Stroke4.99 in
Displacement268.5 in3
Weights
Operating Weight21845.0 lb
Dimensions
Height7.8 ft
Width8.0 ft
Wheelbase10.66 ft
Length to Fork Face18.5 ft
Ground Clearance16.4 in
Turning Radius Over Tires12.0 ft
Tires
Standard370/75-28 Duraforce MT
Optional Construction13.00 x 24 Foam Filled or Rock Lug or Solid
Hydraulic System
Pump TypeSingle-section
Service Refill Capacities
Fuel Tank38.0 gal
Hydraulic Tank38.0 gal
Hydraulic System40.0 gal
Boom Performance
Boom Up13.0 Seconds
Boom Down10.0 Seconds
Tele In13.0 Seconds
Tele Out14.0 Seconds
Drawbar Pull (Basic)18000.0 lb
Brakes
Parking BrakeSpring-applied hydraulic release on front axle
FeaturesService Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle
Axles
ManufacturerDana
Operator Station
FeaturesVinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab
Instrumentation
FeaturesVolt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge

The operator station provides comfort and protection with improved job site visibility and convenient, easier to use controls.

Intuitive Control Layout

All day operator comfort and efficiency is ensured through our easier to use control layout.

Easier Access

Cab entry and exit is both easier and more convenient due to the well placed handholds and step.

Operator Protection

The machine provides full operator security with OROPS or EROPS protection.

Enhanced Visibility

The cab has improved visibility due to the use of advanced virtual design techniques.

Ease of operation was extremely important in the design of the new TL642C. The single joystick is designed to maximize operator efficiency.

Joystick Control

The joystick allows three simultaneous boom functions enabling application customization for more than a dozen configurations.

Flow Sharing

Three simultaneous hydraulic functions are achieved using a full flow sharing hydraulic valve. A load sensing variable displacement pump allows full hydraulic power even at low revs.

The TL642C with outriggers in the down position offers additional capacity at maximum reach to meet your specific job site needs.

Lift Height

The TL642C can pick and place bricks and materials to a maximum height of 42 ft. (12.8 m).

Reach

Job site obstacles present challenges demanding a machine to place loads at greater distances - the TL642C delivers.

Maneuverability

The TL642C offers improved maneuverability, allowing it to work productively in confined areas.

Steering Modes

The TL642C offers three steering modes (two wheel, crab and 4-wheel steer) to allow an operator to more easily position the machine. Steering modes are selected by a single three-position rocker switch. Steering position sensors are fitted as standard to all steering modes to be changed while moving.

Cat componentry, including a Cat C3.4B, Tier 4 Interim engine, gives you the quality power train that you expect.

Transmission

The TL642C features a Power-shift transmission.

The TL642C is as versatile as your toughest job demands.

Quick Coupler

A manual IT coupler is standard on the TL-Series machines. For optimum versatility, all machines are equipped with the hydraulic quick coupler, allowing the operator to more easily change non-hydraulic work tools without leaving the cab.

Hydraulic Services

Machines are equipped with Auxiliary Hydraulic services, allowing the use of hydraulically operated work tools. All TL-Series telehandlers are equipped with a single auxiliary hydraulic service and continuous hydraulic flow.

Work Tools

A wide range of work tools are available to meet most job site applications. Caterpillar Telehandler Work Tools extend the versatility of the machine. Built for performance and durability, these work tools deliver high productivity, long life and excellent value.

  • General Purpose Bucket (1.0 m3/1.3 yd3)
  • Light Materials Bucket (2.0 m3/2.6 yd3, 2.5 m3/3.25 yd3, 3.0 m3/3.90 yd3)
  • Material Handling Bucket (1.5 m3/1.95 yd3, )
  • Multi Purpose Bucket (1.0 m3/1.3 yd3)
  • Grapple Bucket (0.85 m3/1.1 yd3)
  • Fixed Carriage
  • Rotate Carriage
  • Sideshift Carriage
  • Wide Carriage
  • Wide Rotate Carriage
  • Pallet Forks
  • Block Forks
  • Lift Hook
  • Truss Boom
Contact your Cat dealer for additional work tool options.

Tires

A wide range of tire options enables the machine to be configured to achieve optimum job site performance.

Specifically designed to lower your owning and operating costs.

Ease of Access

Cost of ownership starts with ease of service. All Cat Telehandler service points are accessible and major components are at ground level due to overall machine design.

Daily Maintenance

Routine daily maintenance is now reduced to checking fluid levels and a walkaround inspection.

Service Intervals

Engine oil, filter changes and routine lubrication are now only required every 500 hours.

Reduced Componentry

With the reduction in the number of filters and extended service intervals, operating costs are the lowest in the industry.

Equipment Protection Plan

Designed to enhance your telehandler ownership experience with comprehensive coverage and peace of mind.

Caterpillar Dealer Services enables you to operate longer with lower costs, helped by significantly extended service intervals.

Access

All Cat Telehandler service points, including the combined transmission/hydraulic oil filter, are accessible and major components are at ground level due to the overall machine design. A cab mounted service point allows access to the fuel fill, hydraulic oil fill, washer bottle, fuse box and cab air filter for routine checks.

Selection

Make detailed comparisons before you buy. Your Cat Dealer can give you precise answers to your questions.

Purchase

Look at the value that the TL642C telehandler will offer you. Consider all the flexible financing options your Cat Dealer offers as well as day-to-day operating costs.

Operation

Improving operating techniques can boost your profits. Your Cat Dealer has literature and other tools to help increase your productivity.

Replacement

Repair, rebuild or replace? Your Cat Dealer can help you evaluate the cost involved so you can make the right choice.

Product Support

You will find high availability of parts at our Dealer parts counter. Cat Dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime. Additionally, Caterpillar offers a line of genuine remanufactured components which can help lower repair costs.

Easy Financing

Your Cat Dealer can provide a financing package to meet your needs.

TELESCOPIC BOOM
  • Boom angle indicator
ELECTRICAL
  • Alternator, 60 amp, 12 volt
  • Battery, 12 volt, 1000 CCA
  • Horn
  • Alarm, backup
OPERATOR STATION
  • Canopy, ROPS/FOPS
  • Joystick, single electronic
  • Adjustable joystick wristrest
  • Low step, grab bars for easy entry
  • Seat - vinyl, suspension with Cat logo
  • Steering wheel spinner knob
  • Floor mat - heavy duty
  • Left side rear view mirror
  • Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
  • Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
  • Park Brake with indicator light
  • Steering Wheel with Cat logo
  • Cat keys and locks
  • Brakes - wet disc service
POWER TRAIN
  • Engine, Cat C3.4B Tier 4 Interim (100.6 hp)
  • Thermal starting aid
  • Transmission, ZF, WG98-TSC Power-shift, 4-speed forward, 3-speed reverse
  • Cat filters, hoses and couplings
  • Axles - Dana
  • Steering - 4 wheel
  • Parking brake with indicator light
  • Drive - 4 wheel
STRUCTURE
  • Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
  • Cat IT Coupler
ANTI-FREEZE
  • Coolant - Anti-freeze, 50/50 Mix
TIRES
  • Tires - 13.00 x 24 - 12 PR
OTHER EQUIPMENT
  • Integrated lift and tie down points
  • Standard Cat color paint
  • Auxillary hydraulics for auxillary attachments (one function)

listofrelationships

original

Machine Comparison

Other Models in this Category

Select Product Category

Why Cat is Better. Machine Comparison

"
80 percent of our heavy equipment fleet is Caterpillar. We are extremely satisfied with Hawthorne Cat’s service and staff. Hawthorne Cat is the obvious choice for our equipment needs - now and in the future.”
Sam Wathen
SC Valley Engineering, Inc
"

San Diego
Ross Farmer
Sales Manager
858.674.7048 office
760.815.4094 mobile
rfarmer@hawthornecat.com

Hawaii
Bobby Whitworth
General Manager
808.676.0353 office
808.864.5147 mobile
bwhitworth@hawthornecat.com