New | 814F Series 2 Wheel Dozer
Top performance... Caterpillar design combines power, mobility and operator comfort for high productivity. Reliable, durable operation... Rugged construction and easy maintenance provide long life with low operating costs.
|Engine Model||Cat® C9 ACERT™|
|Net Power||232.0 hp|
|Flywheel Power||232.0 hp|
|Gross Power||253.0 hp|
|Net Power - EEC 80/1269||235.0 hp|
|Net Power - ISO 9249||235.0 hp|
|Net Power - SAE J1349 (JAN90)||232.0 hp|
|Torque Rise||30.0 %|
|Operating Weight||47877.0 lb|
|Blade Capacities||2.66 m3|
|Straight Blade - Capacity||3.49 yd3|
|Moldboard Length||11.8 ft|
|Straight Blade - Overall Width||11.8 ft|
|Straight Blade - Height||3.6 ft|
|Straight Blade - Digging Depth||1.73 ft|
|Maximum Lift Above Ground||2.36 ft|
|Blade Tip Angle - Total||51.9 Degrees|
|Blade Tip Angle - Forward||10.0 Degrees|
|Blade Tip Angle - Back||4.5 Degrees|
|Blade Tilt Angle - Right||4.5 Degrees|
|Blade Tilt Angle - Left||8.0 Degrees|
|Straight Blade - Maximum Tilt||2.6 ft|
|Straight Blade - Total Operating Weight||47868.91 lb|
|Turning Circle w/Blade||4703.4 ft|
|Ground Clearance||14.41 in|
|Number of Forward Speeds||4|
|Number of Reverse Speeds||4|
|Forward 1||3.6 mph|
|Forward 2||6.4 mph|
|Forward 3||11.2 mph|
|Forward 4||19.3 mph|
|Reverse 1||4.1 mph|
|Reverse 2||7.3 mph|
|Reverse 3||12.7 mph|
|Reverse 4||21.8 mph|
|Standard Tire Size||26.5 R25 XHA MX L3|
|Tires||L3 rock tread|
|Lift cylinder, bore and stroke||120.62 mm x 913.9 mm 4.74 in x 35.98 in|
|Steering cylinder, bore and stroke||101.6 mm x 597 mm 3.99 in x 23.5 in|
|Relief valve setting||2255.0 psi|
|Brakes||Meet OSHA regulations|
|Turning Radius, Outside Corner of Blade||23.5 ft|
|Turning Radius, Inside Corner of Blade||12.2 ft|
|Height to Top of Cab||10.91 ft|
|Height to Top of Exhaust Pipe||10.84 ft|
|Height to Top of Hood||7.79 ft|
|Ground Clearance to Bumper||2.45 ft|
|Height to Bottom of Ladder||1.45 ft|
|Center Line of Rear Axle to Edge of Bumper||6.14 ft|
|Center Line of Rear Axle to Hitch||5.5 ft|
|Length with Blade on Ground||22.58 ft|
|Ground Clearance||1.2 ft|
|Cab||Meets SAE and ISO standards|
|Service Refill Capacities|
|Fuel Tank - standard||117.8 gal|
|Cooling System||14.5 gal|
|Hydraulic Tank||23.2 gal|
|Differentials and Final Drives - Front||17.1 gal|
|Differentials and Final Drives - Rear||17.1 gal|
|Standards||Meet required standards|
Delivers top performance, durability and reliability.
Cat® C9 ACERT Engine
Delivers, at a rated speed of 2,100 rpm, flywheel power of 173 kW (232 hp) and meets the U.S. Environmental Protection Agency Tier 3 emissions regulations and Stage IIIA EU Emissions Directive 97/68/EC. With high horsepower and low displacement, this innovative engine provides excellent fuel economy and durability which can significantly reduce operating costs.
Is increased as a result of the electronically controlled, computer actuated unit fuel system that provides high injection pressure and more precisely controlled fuel delivery as the engine lugs back from rated speed.
ADEM™ IV Fuel System
Is a Caterpillar® electronic control module which provides improved engine response, performance, fuel efficiency, troubleshooting diagnostics and reduced emissions. It allows integration with the electronic transmission control for maximum power train efficiency.
Packs more dense air into the cylinders for more complete combustion and lower emissions, improving performance and engine efficiency. These benefits are especially useful at high altitudes.
Reduces smoke and emissions by providing cooler inlet air for more efficient combustion. This also extends the life of the piston rings and bore.
Dual Cooling Jets
In the block spray oil on the piston skirt and cylinder bores keep ring temperatures low for long ring and liner life with excellent oil control.
Are two piece articulated with forged steel crowns for excellent strength and aluminum skirts for reduced weight. Pistons are oil cooled for increased heat dissipation and longer life.
Four per cylinder allow for good airflow, enhancing fuel efficiency and heat rejection. Valves and unit injection system are camshaft-actuated for precise timing.
Is a steel-forged, carburized and induction-hardened for long-term durability. It is dynamically balanced for smooth operation. The crankshaft is completely regrindable, and the connecting rods can be removed through the tops of the cylinders for easy servicing.
Cat Engine Oil
Is formulated to optimize engine life and performance and is strongly recommended for use in Cat diesel engines. Engine oil change interval is 500 hours.
Cat Planetary Powershift Transmission
Features heavy-duty components to handle tough jobs. The 345.4 mm (13.6 in) planet drives operate in all gears, forward and reverse.
Heavy-Duty Axles and Brakes
Are designed to last in all kinds of operating conditions. Two front axles disc brakes provide improved braking capability and better heat dissipation. Planetary final drives use free-floating, bronze sleeve bearings in the planet gears. • Oil disc brakes are adjustment-free and fully enclosed to lock out contaminants.
Is rigidly mounted to the frame to support the weight of the compactor, internal torque loads and external loads applied during compacting and dozing operations.
Includes a trunnion, two trunnion supports and associated bearings, allowing it to oscillate plus or minus 12 degrees.
Four Piece Axle
Contains two axle shaft housings - the center housing and the intermediate housing. Features and benefits of this design include: • Inboard brakes on the front axle only are positioned immediately adjacent to the differential and operate on the low torque side of the final drive, requiring less braking to stop the machine.
Enhanced design and materials provide superior strength to the purpose built structures of the 814F Series 2.
Combines the use of robotic welding on up to 90 percent of the 814F Series 2 with castings in several areas to increase strength by helping spread the loads and reduce the number of parts. This provides highly consistent welds with deep plate penetration and excellent plate fusion. The benefits are increased durability and fatigue strength. The computer controlled machining ensures the alignment of pin bore, axle pad, cab mount and transmission/engine components.
Box Section End Frame
Designed to resist twisting and torsional forces, the box section engine end frame provides a solid foundation for the axles, engine and transmission.
With two plates provides maximum structural strength during compaction and dozing applications.
Spread Hitch Design
Improves load distribution by reducing loads to the hitch bearings. The large center hitch design improves hydraulic line routing and makes service access easier.
Upper and Lower Hitch Pins
Pivot on double-tapered roller bearings. Box-style sections in the hitch pins and crossmember assembly improve frame structure strength. Increased diameter lower hitch pins add to the robust design.
Engine and Transmission Mounts
With rubber isolation mount design reduces noise and vibration.
Comfort and control - a top quality operator's station helps maximize productivity.
1 Exceptional All-Around Viewing Area
Reduces strain and fatigue, making operators more productive.
2 Caterpillar Monitoring System
With electronic analog gauges is a highly effective and reliable warning and diagnostic system. As a warning system, it constantly checks machine functions and tells the operator when there is a problem. Easy-to-read gauges display fuel level, temperatures for engine coolant, transmission and hydraulic oil, engine rpm and gear range. Hour meter, odometer and analog tachometer readings are also displayed. As a diagnostic system, it identifies conditions, shows current readings and plays back maximum or highest readings registered during recent operations. The right side panel contains a three level warning system, providing full-time monitoring of key functions. The system alerts the operator of immediate or impending problems with air inlet temperature, brake oil pressure, electrical system, low voltage, engine oil pressure, engine over-speed, fuel filter status, parking brake status, steering oil pressure and transmission filter status.
3 Quick Gear Kick Up/Down Button
Lets the operator easily downshift or upshift to a different gear. It is a convenient way to shift that saves time and effort.
4 Ignition Key Start/Stop Switch
Is positioned for easy machine starting and stopping.
5 12-Volt Power Supply and Cat Electronic Technician (ET) Diagnostics
Is provided inside the cab for powering radios, telephones or a laptop computer. This is particularly useful for powering a laptop running Cat ET to access the enhanced engine and transmission control system diagnostics.
6 Steering Column
Adjusts to multiple positions. The leather-like steering wheel and transmission control provide a sure grip and comfortable feel. The horn is conveniently located in the center of the steering wheel.
7 Pilot-Operated Blade Controls
Are conveniently located and allow for precise blade movement.
8 Operator Seat
Is designed for comfort and support. Seat cushions reduce pressure on the lower back and thighs while allowing unrestricted arm and leg movement. • A fully adjustable air suspension seat with self-contained compressor is available as an option.
9 Built-In Storage Space
Is designed to hold cups, lunch box, insulated bottle and personal items.
10 Repositioned Vents
Throughout the cab keep fresh air flowing while improving the cab's heating, cooling, defrost and defog capability.
11 Throttle Lock
Allows and operator to set the engine speed and remove his foot from the governor (accelerator) pedal much like cruise control on an automobile. Using this feature increases productivity, fuel efficiency and improves operator comfort.
12 Decelerator Pedal
On the left acts as both an engine decelerator and a brake that overrides the engine speed selected by the throttle lock. This enables the operator to slow down when throttle lock is engaged and to return to throttle lock without pressing a button. It aids in maneuvering around shovels, haul trucks, tractors or any other obstacle.
13 Windshield Washers/Wipers
With in-the-blade washer delivery system are standard features on front and rear windows. The front wiper has intermittent speed capability.
14 Rear Vision Camera Monitor
Connected to a camera mounted on the radiator guard, this monitor allows the operator to see the area behind the machine.
Multiple box-section construction with heat-treated moldboard and DH™-2 steel edges and end bits for long life.
Consists of blade, push arms, trunnion mounting, dozer length skid plate, reversible cutting edges, self-sharpening end bits, hydraulic lines guard and hydraulic blade cylinders.
Is standard on the 814F Series 2.
Dozer Front Frame
Built specifically to handle greater amounts of rimpull, the machine can readily push its weight plus the weight of the material for long distances in heavy dozing applications.
Lift and tilt/tip are standard options and the levers are located to the right of the operator.
The 814F Series 2 excels at dozing, spreading fill, backfilling, stockpiling, charging hoppers, maintaining roads and cleaning up around trucks and shovels.
Contact Cat Work Tools and Services for additional blade options which include:
- Coal scoop with tilt
- Woodchip scoop with tilt
- Coal U-blade with 25 degree wing angle
Available options augment the 814F Series 2 to meet your needs.
Rear Vision Camera
Uses a camera mounted on the radiator guard and a monitor in the cab to allow the operator to see the area directly behind the machine.
Air Suspension Seat
Provides added comfort for the operator so productivity stays high.
Uses blended air and R134a refrigerant for immediate temperature changes.
Several radio options are available factory installed: AM/FM CD or AM/FM CD with satellite radio (a service contract is required from a satellite radio provider).
Allows the customer and/or dealer to monitor the machine from a remote location.
Fast Fill Adapter
Used during peak periods when high production is needed and little down time can be afforded for fueling. Fuel is pumped into the tank through a filling nozzle at rates up to 378.5 liters (100 gallons) per minute. As fuel enters the tank, air is forced out through an open vent. When the tank is full, the vent closes and the filling nozzle.
High Speed Oil Change
Uses an evacuation system to speed up the engine oil change which helps to reduce the service time.
Turbine Pre-Cleaner Group
Replaces the standard statatube air cleaner with a turbine-style air intake cleaner which is useful in dry, dusty work conditions.
Is located on either side of the push arms. For each specific application, there is a correct machine weight for proper balancing of traction, flotation, mobility and response. Lower machine weight is usually required for typical second gear applications such as fill spreading, stockpiling, road maintenance, towing implements and shovel cleanup. Higher machine weight is usually required for such typical first gear applications as heavy dozing and push loading.
Are available from Michelin (two options).
High Intensity Discharge (HID) Lights
Adds four lights on the cab and two on the radiator guard to brighten up the work area. HID lights are two times brighter than the standard halogen lights. Note: These lights will be available mid-2007.
If maintenance is simple and areas easily accessible, it gets done.
Cat Electronic Technician (ET)
Is a software program which allows the service technician to find and identify a problem on a machine and to analyze how to fix it quickly. Cat ET provides the capability to access the electronic control modules from a personal computer. Cat ET is used for:
- Viewing active and non-active diagnostic codes and clearing them after repair.
- Displaying the status of all parameters such as engine speed, gear engaged, control levers position, control switch position, etc.
- Performing diagnostic tests and calibrations of electro-hydraulic components.
- Viewing current configurations and changing parameter settings.
- Flashing new Caterpillar software in the electronic control modules.
- Recording all parameters during machine operation.
Caterpillar Monitoring System
Provides diagnostics that allow technicians to review a machine's operation and quickly troubleshoots problems. Operating parameters, diagnostic codes and out-of-range readings are displayed through the diagnostic connector.
All metal engine enclosure and hinged access doors allow for easy daily maintenance and inspections.
Left Side Service Access
Provides convenient entry to the engine oil filter, grease points, air filter, power train oil dipstick, coolant sight gauge, power train oil fill, power train oil filter and high speed engine oil fill.
Right Side Service Access
Features that are easily reached under the hood include fuel filter and water separator, fuel primer and engine oil dipstick.
500 Hour Oil Change Interval
Increases uptime and production by doubling the time between oil and filter changes without requiring increased oil sump capacity.
Engine Shutdown Switch
Is located inside engine enclosure panel for simple access and extended switch life.
Are new to the 814F Series 2. They are located in the cab and improve reliability and serviceability.
Caterpillar Scheduled Oil Sampling
Helps ensure better performance, longer life and increased customer satisfaction. It is an extremely thorough and reliable early warning system which detects traces of metals, dirt and other contaminants in your engine, axle, transmission and hydraulic oil. S·O·SSM sampling can predict potential trouble early, thus avoiding costly unscheduled failures. Your Caterpillar dealer can give you results and specific recommendations shortly after receiving your sample.
Hinged Hydraulic Oil Cooler and Air Conditioning Condenser
Swing open without special tools and allows the cooling system to be cleaned quickly and easily.
Is located in the right side bumper for convenient access to the maintenance-free batteries.
Is located in the left side bumper for additional protection against harsh work environments.
Cat dealers are the equipment experts.
Make detailed comparisons of the machines under consideration before purchase. Cat dealers can estimate component life, preventative maintenance cost and the true cost of lost production.
Look past initial price. Consider the financing options available as well as day-to-day operating costs. Look at dealer services that can be included in the cost of the machine to yield lower equipment owning and operating costs over the long run.
Repair, rebuild or replace? Your Cat dealer can help you evaluate the cost involved so you can make the right choice.
Customer Support Agreements
Cat dealers offer a variety of product support agreements and work with customers to develop a plan that best meets specific needs. These plans can cover the entire machine, including attachments, to help protect the customer's investment.
You will find nearly all parts at our dealer parts counter. Cat dealers use a worldwide computer network to find in-stock parts to minimize downtime. Save money with genuine Cat Reman parts. You receive the same warranty and reliability as new products at cost savings of 40 to 70 percent.
Improving operating techniques can boost your profits. Your Cat dealer has training videotapes, literature, application and equipment training courses and other ideas to help you increase productivity.
More equipment buyers are planning for effective maintenance before buying equipment. Choose from your dealer's wide range of maintenance services at the time you purchase your machine. Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as S·O·SSM and Coolant Sampling and Technical Analysis help you avoid unscheduled repairs.
Select Product Category
- Articulated Trucks
- Asphalt Pavers
- Backhoe Loaders
- Cold Planers
- Compact Track and Multi Terrain Loaders
- Material Handlers
- Motor Graders
- Off-Highway Trucks
- On-Highway Trucks
- Road Reclaimers
- Site Prep Tractors
- Skid Steer Loaders
- Track Loaders
- Wheel Dozers
- Wheel Excavators
- Wheel Loaders
- Wheel Tractor-Scrapers