New | 992K Wheel Loader

Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that’s both safe to operate, productive and durable. With the introduction of the K Series, we’ve enhanced the operator’s experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775 and 777 trucks. If your operations revolve around the 992 as a loading tool, you’ll find everything that’s important to your business in the 992K; safety, productivity, cost control and comfort for your people.

Engine
Net Power814.0 hp
Engine ModelCat® C32 ACERT™
Bore5.7 in
Stroke6.4 in
Displacement8.5 gal
EmissionsU.S. EPA Tier 4 Final
Gross Power - SAE J1995907.0 hp
Gross Power***900.0 hp
Net Power***814.0 hp
Operating Specifications
Operating Weight220089.0 lb
Operating Weight High Lift**221847.0 lb
Operating Weight Standard Lift*220089.0 lb
Rated Payload - High Lift21.0 tons
Rated Payload - Standard Lift24.0 tons
Buckets
Bucket Capacities10.7-12.3 m3 (14-16 yd3)
Transmission
Converter Drive - Forward 14.3 mph
Converter Drive - Forward 27.4 mph
Converter Drive - Forward 312.6 mph
Converter Drive - Reverse 14.7 mph
Converter Drive - Reverse 28.1 mph
Converter Drive - Reverse 313.8 mph
Direct Drive - Forward 1Lock-up Disabled
Direct Drive - Forward 28.0 mph
Direct Drive - Forward 314.2 mph
Direct Drive - Reverse 14.9 mph
Direct Drive - Reverse 28.8 mph
Direct Drive - Reverse 315.4 mph
Loader Hydraulic System
Relief Valve Setting4500.0 psi
Lift Cylinders, Double Acting: Bore11.0 in
Lift Cylinders, Double Acting: Stroke45.2 in
Tilt Cylinder, Double Acting: Bore10.5 in
Tilt Cylinder, Double Acting: Stroke80.9 in
Service Refill Capacities
Cooling System77.0 gal
Crankcase32.0 gal
Transmission45.0 gal
Differentials and Final Drives - Front95.0 gal
Differentials and Final Drives - Rear91.0 gal
Fuel Tank - Standard413.0 gal
Hydraulic Tank - Implement86.0 gal
Hydraulic Tank - Steering/Brake42.0 gal
Windshield Washer Fluid4.9 gal
Operating Specifications - High Lift*
Breakout Force127813.0 lb
Static Tipping Load at 35° articulation114760.0 lb
Hydraulic Cycle Times
Dump*1.8 Seconds
Lower Float Down (Empty)3.7 Seconds
Raise*9.4 Seconds
Total Hydraulic Cycle Time14.9 Seconds
Model
Serial Number Prefix880
Cab
ROPS/FOPSMeets SAE and ISO standards
Sound Performance
PerformancePerformance
Operating Specifications - Standard Lift*
Breakout Force123439.0 lb
Static Tipping Load, at 35° articulation122010.0 lb
Weights
Operating Weight - High Lift**221847.0 lb
Operating Weight - Standard Lift*220089.0 lb
Brakes
BrakesMeets SAE J1473, OCT90 and ISO 3450:1992
Tires
TiresChoose from a variety of tires to match your application.

Proven designs and components ensure multiple life cycles

Linkage and Frames

We combine 40+ years of design and field experience - as well as new validation technologies - to ensure 992K frames, castings, welds and fabrications are the best in the industry. Our unique box section rear and front frame designs combine plates and castings to manage torsion loads and provide longer lasting alignment for hitch and pin life. Sleeve bearing pins in the linkage are more predictable in their wear and limit daily greasing. For load and carry applications, optional Ride Control further reduces shock loads to the frame while giving the operator a much smoother ride.

Cat C32 Engine

The 992K retains the durability and reliability of the proven Cat C32 diesel with ACERT™ Technology. Like all Cat machines, this engine has been completely integrated into all machine systems resulting in power curves, fuel maps and ratings that are unique to this machine and applications. The solid foundation of this engine starts from our legendary foundries delivering the highest quality engine block. The mechanically actuated, electronically controlled unit injection (MEUI™) ensures that fuel is metered out in optimal quantities for both power and efficiency.

Cat Planetary Powershift Transmission

Nobody builds a better transmission than Caterpillar for earthmoving applications. Everything from gear geometry, heat treatment and metallurgy are Caterpillar design controlled, including the electronics that allow it to integrate with the C32 engine and Impeller Clutch Torque Converter of the 992K. The Cat Planetary Powershift Transmission in the 992K offers three forward and three reverse speeds. The planetary gear group is common with the 993K and 994F large wheel loaders.

Delivering optimum performance for your application

Positive Flow Control Hydraulics

The 992K Positive Flow Control (PFC) Hydraulic System is setting a new standard for hydraulic response, performance and efficiency. The implement system is equipped with two electronically controlled, fully variable piston pumps for fast, productive cycles. PFC has concurrent pump and valve control. By optimizing pump control, hydraulic oil flow is proportionate to implement lever stroke. Benefits:

  • Lowered fuel consumption by up to five percent
  • Improved hydraulic response, giving the operator better feel and control of the bucket
  • Improved power efficiency and lower system heat

Impeller Clutch Torque Converter (ICTC)/Rimpull Control System

ICTC maintains hydraulic balance while digging and loading, enabling the operator to finely modulate rimpull by depressing the left pedal, thus reducing the impeller clutch pressure. The further the pedal is depressed, the more the impeller clutch pressure is reduced.

Matched Systems

An efficient loading/hauling system starts with a perfect match. The 992K is matched to the 775 and 777 Cat Trucks providing full truck payloads with minimum loading time. This loading/hauling system will maximize volume of material moved at the lowest operating cost per ton.

Leading the industry in design and ergonomics

The 992K sets a new benchmark in operator comfort for this size class with a completely new cab. The new cab interior has been increased giving operators plenty of room for long work shifts. Operators will appreciate this increased room when the standard trainer seat is occupied. As the benchmark for operator comfort the 992K does not compromise on safety. Standard 76 mm (3 in) wide retractable seat belts for an operator and trainer provide comfort while keeping both occupants safe. Conversations between them will be easier with a more quiet cab while automatic temperature controls ensure they do this in complete climate comfort. Vibrations are kept to a minimum with Cat Comfort seat with air suspension and viscous cab mounts. Operators will appreciate improved air quality with a pressurized cab and filtered air. Operators can set automatic bucket heights for easier truck loading or feeding a crusher. The implement controls are finger tip controlled and low effort.

Electronic Systems Integration enables the 992K achieve greater productivity

The 992K electronic systems have been completely integrated to function as one machine. This integration creates a smart machine and more informed operator maximizing the productivity of both.

VIMS 3G

Now utilizing the Advisor Display, Vital Information Management System (VIMS 3G) has been improved providing more user friendly interfaces and additional machine data logging. Since 1990 VIMS has been enabling our customers and operators to perform at their best and ensure maximum uptime for our machines using meaningful data.

Operator Profile

Up to 10 separate operator profiles can be stored through Advisor. Screen layouts and machine settings can instantly be recalled providing a quick and consistent setup between operators.

Payload Control System

Payload Control System 3.0 is standard on the 992K providing owners and operators the ability to manage truck payloads and produce accurate records of material movement. This system is designed for on the go weighing. Up to 1,000 trucks can store 25 different materials for comprehensive record accuracy of job site performance.

Automatic Kickout

Operators can easily set the dump height, return to dig/carry or bucket angle from the comfort of the cab. Standard, in-cab programmable kickouts are located in the upper left panel. This feature provides more flexibility and improved productivity when the job requires load and dump target heights.

Cat Product Link

Cat® Product Link enables convenient, remote monitoring of equipment. Get usable information to keep jobs on schedule, maintain machine health and reduce fleet owning and operating costs.

Safety is always our first priority

We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site. Here are just a few of the safety features found on the 992K.

  • Wider stairs with improved stair angles increase safety for operators getting on and off the 992K.
  • Walkways offer non-skid surfaces and integrated lock out/tag out points are designed into the service areas.
  • Windshield cleaning platforms provide safe and convenient access for the operator.
  • Extensive glass in the cab and optional heated mirrors extend visibility. An object detection system (rearview camera and radar) or rearview camera option increases operator awareness around the machine.
  • A backup alarm is standard, and operators receive three levels of warning when the machine requires attention.
  • Available HID lights provide excellent workspace visibility.
  • An operator trainer seat allows your seasoned professionals to guide new operators. 76 mm (3 in) wide safety belts are standard on both seats.
  • External roll over and falling object protection (ROPS/FOPS).

Organized to reduce your costs

The 992K is organized into individual service centers. Combined with the diagnostics available through VIMS, Product Link and Electronic Technician, servicing the 992K can be simple and efficient. 1) Diagnostic and Fluids Service Center

  • Power on switch
  • Electronic Technician “ET” Com-II port
  • Ground level
  • Radiator fill port
  • Implement fill port
  • Steering tank fill port
  • Transmission fill port
  • Engine oil fill port
  • Autolube fill port
  • Keypad for machine fluid indicators
  • Messenger Display 2) Hydraulic Service Center
  • Hydraulic pilot filters
  • Hydraulic pumps
  • Hydraulic case drain filters 3) Electrical Lockout Area (left side bumper)
  • Auxiliary emergency shutdown switch
  • Stairway light switch
  • Starter lockout switch
  • Transmission lockout switch 4) Remote Diagnostic Pressure Ports Front Frame
  • Lift and lower circuit
  • Dump and rackback circuit
  • Right and center implement pump relief pressures
  • Ride control (optional)
  • Pilot supply
  • Manual lower valve 5) Remote Diagnostic Pressure Ports Rear Frame
  • Steering left
  • Steering right
  • Steering pump discharge
  • Fan drive
  • Brake accumulator - front and rear
  • Impeller clutch
  • Lock-up clutch (if equipped)
  • Transmission lube
  • Brake pump discharge
  • Axle oil cooler motor supply
  • Axle oil cooler pump - front and rear
  • Service brakes - front and rear 6) Electrical Service Area
  • Breakers
  • ECMs
  • Fuse 7) Engine Filter Service Area
  • Primary fuel filter
  • Engine oil filters
  • Water separator
  • Air filters
  • Secondary fuel filter
  • Tertiary fuel filter

The key to a better built machine

Caterpillar’s commitment to quality is profound. We design to a higher standard so that your business can prosper.

  • All of our parts are subject to quality and conformance checks. We collaborate with suppliers early in the design phase for their knowledge and manufacturing experience.
  • New designs undergo Finite Element Analysis telling us where stresses congregate under loads typical of the machine’s application. New castings are virtually monitored to evaluate fill quality and temperature exchange.
  • A shake table simulates thousands of hours of use in days - allowing engineers to validate durability. Further analysis on airflow, ergonomics, performance, and ISO standard compliance are performed on prototype and field follow machines.
  • Further tests are performed by operators and technicians for comfort, ergonomics and serviceability either in 3D virtual environments or on the iron.
  • You should know that all new product introductions at Caterpillar are guided by your voice and input, the voice of our dealer organization and their mechanics, and on our ability to physically manufacture a new design. These are just some of the criteria that make Cat products leaders in the industry, and help us ensure long life, reliable machines for your business.

Protecting the Environment

Our commitment to you, your business and future generations is as strong as the machines we build. Our effort to build machines that live longer, use fewer resources, and produce fewer emissions is only the start. Our plants, like the Aurora facility where the 992K is built, are conserving precious energy and resources with solar power, roof top gardens, and comprehensive recycle programs. Sustainability is profitable. Our cleaner environment helps us control quality on the assembly line and build better products. It reduces our energy demand and our output to the landfill. We can similarly help your business with machines that lead the industry in balancing fuel use with productivity demands. Each generation of Cat product produces less emissions than the last, helping reduce the carbon foot print of your fleet. In fact, the 992K (Prefix 880) now meets strict U.S. EPA Tier 4 Final emissions.

Tier 4 Final Emission*

For customers that are located in regions with Tier 4 Final Emissions requirements, Caterpillar has developed a reliable U.S. EPA Tier 4 Final solution which requires no operator input. Utilizing ultra-low sulfur diesel fuel, two primary solutions are used on the C32 engine platform to meet these emissions. *All non road U.S. EPA Tier 4, European Union (EU) Stage IIIB and IV, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. Cat® DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required.

Diesel Oxidation Catalyst

The C32 Tier 4 Final engine features an after-treatment package that combines a Diesel Oxidation Catalyst (DOC) and muffler into a single unit, per exhaust bank, and is mounted on the top of the engine. The DOC uses a chemical process to transform hydrocarbons and carbon monoxide into water and carbon dioxide as they flow through the components. It requires no maintenance and is designed to last the entire life of the engine.

Cat NOx Reduction System

The Cat NOx Reduction System uses cooled exhaust gas to reduce combustion temperatures and prevent NOx formation. This is accomplished by diverting a portion of the exhaust gas through dedicated coolers before being mixed with fresh air and re-entering the engine intake. Combustion air is diluted with inert gas, which lowers the combustion temperature, resulting in reduced NOx.

Options to reduce your cost per ton

Selecting the right bucket will dictate the productivity of your loader. The process of selection starts with knowing the density of the material you load. From there, you can select the size and appropriate protection strategies that will suit the rated payload targets of your machine. With a large selection of ground engaging tools, your Cat dealer can help you build a bucket that best suits your application. Custom buckets are an option, however many 992K customers will choose one of the following:

Heavy Duty Rock Bucket

Applications: Face loading tightly compacted pit materials. Moderate abrasion factors and high impact loads are suitable for this bucket.

High Abrasion Rock Bucket

Applications: Face loading iron ore. High abrasion and moderate impact loads are suitable for this bucket. A smooth floor is also desirable. Note: Some applications can be very abrasive. Keep in mind that additional bucket protection can affect the performance of the machine such as higher horsepower loads, higher fuel consumption and affect productivity. With this in mind, it is important that you do not over protect the bucket and replaceable components of the bucket.

Protect your investment

You can’t buy a better performing or longer lasting tip than Cat K Series ground engaging tools. Short of a missing operator, nothing affects the productivity of your loader more, so consult your Cat dealer if your current system isn’t living up to expectations. When worn beyond use by such materials as iron ore, K Series are easy to change out - no hammer required. A full list of Cat GET can be found on http://www.Cat.com/get. Typical 992K Ground Engaging Tools include: Adapters and Tips: Heavy Penetration - Heavy Abrasion - Penetration Side Bar Protectors Base Edges Bucket Wings

ELECTRICAL
  • Alarm, back-up
  • Alternator, (150-amp)
  • Batteries, low maintenance
  • Deutsch & Amp Seal terminal connectors
  • ECM diagnostic connector
  • Ground level electrical disconnect
  • Ground level starting receptacle for emergency start
  • Lighting system, halogen (front and rear)
  • Lighting, access stairway
  • Starter, electric (heavy duty)
  • Starting and charging system (24-volt)
OPERATOR ENVIRONMENT
  • Advisor display
  • Air conditioner and heater with automatic temperature control
  • Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS) Radio ready for (entertainment) includes antenna, speakers, and 1 x 12V converters (24-volt, 10 amp) for use with laptop/cell phone
  • Cigar lighter and ashtray
  • Coat hook
  • Electro-hydraulic tilt and lift control system locks
  • Heater and defroster
  • Horn, electric
  • Implement and steering lockouts
  • VIMS 3G monitoring system
  • Light, dome (cab)
  • Lunchbox and beverage holders
  • Mirrors, rearview (externally mounted)
  • Seat belt, retractable, 76 mm (3 in) wide operator and trainer seats
  • Seat, Cat Comfort (cloth) air suspension
  • STIC control system
  • Tinted glass
  • Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
POWER TRAIN
  • Air-to-Air After cooler (ATAAC)
  • Auto Idle Kickdown
  • Axle oil coolers (front and rear)
  • Brakes, fully hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
  • Case drain filters
  • Delayed Engine Shutdown
  • Demand fan
  • Electric fuel priming pump
  • Engine Cat® C32 ACERT
  • Ground level engine shutdown
  • Ground level fast fill fuel
  • Ground level transmission lockout
  • Ground level starter lockout
  • Idle Engine Shutdown
  • Precleaner, engine air intake
  • Next Generation Modular Radiator (NGMR)
  • Starting aid (ether) automatic
  • Throttle lock
  • Transmission, 533 mm (21 in) planetary, powershift with 3F/3R, electronic control
  • Venturi Exhaust Stacks
OTHER STANDARD EQUIPMENT
  • Autolube
  • Automatic bucket lift/tilt kickouts, electronically adjustable from cab
  • Bumper service center
  • Couplings, Cat O-ring face seals
  • Doors, service access (locking)
  • Emergency platform egress
  • Fenders, steel (front and rear)
  • Grouped hydraulic pressure ports
  • Guards, power train and crankcase
  • Hitch, drawbar with pin
  • Hoses, Cat XT and XT-ES
  • Hydraulic oil cooler
  • Impeller clutch
  • Implement and steering ecology drains
  • Mufflers, under hood
  • Oil sampling valves
  • Piston pump case drain filters
  • Positive Flow Control implement system
  • Product Link
  • Service center with ground level electrical and fluids service center
  • Sight gauges:
  • Starter lockout, bumper
  • Stairway, left and right rear access
  • Steering, load sensing
  • Tilt regeneration
  • Toe kicks
  • Transmission lockout, bumper
  • Vandalism protection caplocks
  • Windshield cleaning platforms
TIRES, RIMS, AND WHEELS
  • A tire must be selected from the mandatory attachments section. Base machine price includes a tire allowance.
ANTIFREEZE
  • Premixed 50 percent concentration of extended life coolant with freeze protection to 34° C (-29° F)

listofrelationships

small_image

original

original

original

original

Machine Comparison

Other Models in this Category

Select Product Category

Why Cat is Better. Machine Comparison

"
80 percent of our heavy equipment fleet is Caterpillar. We are extremely satisfied with Hawthorne Cat’s service and staff. Hawthorne Cat is the obvious choice for our equipment needs - now and in the future.”
Sam Wathen
SC Valley Engineering, Inc
"

San Diego
Ross Farmer
Sales Manager
858.674.7048 office
760.815.4094 mobile
rfarmer@hawthornecat.com

Hawaii
Bobby Whitworth
General Manager
808.676.0353 office
808.864.5147 mobile
bwhitworth@hawthornecat.com