New | ATC Molded Case Circuit Breaker & Molded Case Switch Automatic Transfer Switch

Cat® transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a compact package. The open transition breaker-based Automatic Transfer Switch (ATS) will provide fully functioning transfer in applications where a momentary loss of power is acceptable on retransfer from emergency to normal power supply. The Cat Open Transition MCCB & MCS types of ATS also permits periodic testing of the emergency source without interrupting power to the loads and are available from 30 to 1000 amperes.

Technical Summary
Rating Range30-1000A
Transfer TypeOpen transition
Switch TypeMolded Case
Ratings
Control Power30-1000A 2, 3, or 4 Pole, 100% Rated
System Voltage Application120 - 600 Vac, 50/60 Hz
Withstand100,000 amps withstand/closing/ interrupting at480 Vac
Applicable TestingCSA C22.2 No. 178 certified
IBC 2006, CBC 2007 and OSHPD

  • atc-100, Atc-300+ Or Atc-800 Microprocessor-based Controller
  • mechanical (cable) And Electrical Interlocking To Prevent Paralleling Of Sources
  • voltage And Frequency Sensing
  • multiple Field Programmable Time Delays
  • switch Position Indication
  • source Availability Indication
  • safe Manual Transfer Under Load
  • source 1 And Source 2 Auxiliary Contacts
  • programmable Plant Exerciser
  • system Test Pushbutton
  • load Shed From Emergency (atc-800 Only)
  • mimic Diagram
  • mechanical (cable) And Electrical Interlocking To Prevent Paralleling Of Sources
  • safe Manual Operation Under Full Load With Permanently Affixed Operating Handle
  • ambient Temperature Range: -40c To 40c (-40f To 104f)
  • operating Temperature Range: -20c To 70c (-4f To 158f)
  • operating Humidity: Up To 90%
  • relative Humidity (non-condensing)
  • frequency Sensing On Source 1 And 2
  • true Rms Three Phase Voltage Sensing On Source 1, Source 2 And Load
  • Standard Equipment

    Controls and Wiring
    • All controls relays and industrial grade relays are totally encapsulated to minimize exposure to dust and dirt. Lugs are 90º rated and all control wire is #16 AWG, type XLPE with a 125º temperature rating.
    Enclosure
    • Durable powder-coated steel NEMA 1, NEMA 3R and NEMA 12 are available with ATC-100 and ATC-300+ controllers. NEMA 4 is only available with the ATC-800 controller. The enclosures are Seismic Qualified (BOCA, CBC, IBC, UBC). The hinges have removable hinge pins to facilitate door removal for easy wall mounting or service and are supplied with pad-lockable latches.

    Optional Equipment

    Available Options
    • Suitable for service entrance
    • Integral overcurrent protection
    • 2- or 4-position test switch
    • Multi-meter options available
    • Selectable automatic or non-automatic operation
    • Space heaters
    • Load sequencing contacts
    • Surge suppression
    • Remote communications
    • Controller availability: ATC-100, ATC-300+,and ATC-800
    • Field selectable, multi ratio, control voltage transformer 50/60 Hz
    • Communications for the ATC-300+ Controller via RS-232 or Modbus through an integrated RS-485 port
    Optional Delayed Transition includes:
    • Time delay neutral
    • Pre-transfer signal with 1 N.O. and 1 N.C. contacts

    listofrelationships

    original

    Other Models in this Category

    Select Integrated System Type


    Hawthorne Power Systems Logo

    Request a Quote

    Why Cat is Better. Machine Comparison

    "
    With only a few days notice, we were able to get the emergency system working properly. Hawthorne Cat provided great leadership and excellent field support.
    Mark Cripe
    Helix Electric
    "

    San Diego - Power
    Steve Jamison
    Power Systems Sales Manager
    858.376.6821 office
    858.688.0083 mobile
    sjamison@hawthornecat.com

    Phillip J. Smith (PJ)
    Service Manager - CSA Group
    858.376.6874 office
    858.688.0134 mobile
    psmith@hawthornecat.com

    Paul Karpf
    Rental Department Manager
    858.376.6888 office
    858.688.0039 mobile
    pkarpf@hawthornecat.com

    Tom Bonham
    Product Support Sales Manager
    858.376.6898 office
    442.248.2108 mobile
    tbonham@hawthornecat.com

    Hawaii – Power
    Cliff Yuen
    Power Systems Sales Manager
    808.676.0322 office
    808.349.7767 mobile
    cyuen@hawthornecat.com

    Travis Tilton
    General Service Manager
    808.676.0314 office
    808.864.1903 mobile
    ttilton@hawthornecat.com

    Guam – Power
    Myver Hecita
    Power Systems Rental &
    Sales Representative
    671.649.4241 office
    671.898.2740 mobile
    mhecita@hawthornecat.com

    Richard Nostratis
    Service Manager
    671.649.4212 office
    671.898.2735 mobile
    rnostratis@hawthornecat.com