New | Cat® C15 ACERT™ Industrial Power Unit
The Cat® C15 ACERT™ Industrial Power Unit is offered in ratings ranging from 354-433 bkW (475-580 bhp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
|Minimum Power||475.0 bhp|
|Maximum Power||580.0 bhp|
|Rated Speed||1800-2100 rpm|
|Emissions||U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.|
|Engine Configuration||Inline 6, 4-Stroke-Cycle Diesel|
|Bore||137 mm (5.39 in)|
|Stroke||171 mm (6.73 in)|
|Displacement||15.2 L (927.6 in³)|
|Aspiration||Turbocharged Aftercooled (TA)|
|Rotation (from flywheel end)||Counterclockwise|
|Cooling System Capacity||26.9 L (28.4 qt)|
|Lube System (refill)||38-72 L (40-76 qt)|
|Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)|
|Length||2172-2488 mm (85.5-98 in)|
|Width||1180-1229 mm (46.5-48.4 in)|
|Height||1912-2006 mm (75.3-79 in)|
|Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)||2113-2650 kg (4658-5842 lb)|
|Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)|
|Diameter||330.2-355.6 mm (13-14 in)|
|Width||779.8-1112 mm (30.7-43.8in)|
|Height||451.3-654 mm (17.8-25.7 in)|
|Weight||180-268 kg (397-590.8 lb)|
|PETU Dimensions (Tier 4 Final, Stage IV Only)|
|Volume Capacity||48.4 L (51.1 qt)|
|Length||854 mm (33.6 in)|
|Width||287 mm (11.3 in)|
|Height||551 mm (21.7 in)|
|Weight||19.42 kg (42.8 lb)|
Meets U.s. Epa Tier 4 Final, Eu Stage Iv Emission Standards. Designed To Meet Proposed Eu Stage V Emission Standards (as Of Publishing Date, Stage V Regulations Have Not Been Finalized). U.s. Epa Tier 4 Interim, Eu Stage Iiib Configurations Are Also Available Using Epa Or Eu Flex Provisions.
World-class Manufacturing Capability And Processes Coupled With Proven Core Engine Designs Assure Reliability, Quiet Operation, And Many Hours Of Productive Life.
Simple And Efficient Turbocharger With Balance Valve Provides Optimal Air Management And Improved Fuel Efficiency.
Fuel Consumption Optimized To Match Operating Cycles Of A Wide Range Of Equipment And Applications While Maintaining Low Operating Costs.
Tier 4 Interim Or Tier 4 Final, Stage Iiib Or Stage Iv Engines Require Ultra Low Sulfur Diesel (ulsd) Fuel Containing A Maximum Of 10 Ppm Sulfur (eu) And 15 Ppm Sulfur (u.s.), And New Oil Formulations To Support The New Technology. Cat® Engines Are Designed To Accommodate B20 Biofuel. Your Cat Dealer Can Provide More Information Regarding Fuel And Oil.
Industry Leading Range Of Factory Configurable Ratings And Options For Agricultural, Material Handling, Construction, Mining, Aircraft Ground Support, And Other Industrial Applications.
Exceptional Power Density Enables Standardization Across Numerous Applications. Available Factory-installed Configurations: Full Package, Including Radiator And Clean Emissions Module (cem); Package With Cem, But No Radiator; And Package With Radiator Installed, But Cem Shipped Loose.
Worldwide Service Delivers Ease Of Maintenance And Simplifies The Servicing Routine. If Applicable, Minimum 5000-hour Diesel Particulate Filter (dpf) Ash Service Interval Enables Low-cost Maintenance. Capable Of Optimal Oil Change Intervals Of Up To 500-hours, Depending On Rating, Application, Operating Conditions, And Maintenance Practices. Engine B10 Life Up To 10000 Hours For Tier 4 Final, Stage Iv. The S·o·ssm Program Is Available From Your Cat Dealer To Determine Oil Change Intervals And Provide Optimal Performance.
Every Cat Engine Is Manufactured To Stringent Quality Standards In Order To Assure Customer Satisfaction.
- scheduled Maintenance, Including Sossm Sample
- customer Support Agreements (csa)
- caterpillar Extended Service Coverage (esc)
- superior Dealer Service Network
- extended Dealer Service Network Through The Cat Industrial Service Distributor (isd) Program
regeneration. Cat Regeneration System Maximizes Fuel Efficiency During Regeneration. Flexible Regeneration Options Maximize Uptime.
mounting. remote Installation Options Provide Oem Flexibility For Many Applications, Including Horizontal And Vertical Mounting, With And Without Muffler.
service. minimum 5000 Hour Dpf Ash Service Interval.
regeneration. cat Regeneration System Maximizes Fuel Efficiency During Regeneration. Transparent Regeneration Maximizes Uptime. Aftertreatment Life Is Twice As Long As Engine Rebuild
mounting. remote Installation Options Provide Oem Flexibility For Many Applications, Including Horizontal And Vertical Mounting.
service. minimum 5000 Hour Dpf Ash Service Interval. Petu Filter Service Is 5000 Hours. Petu Def Capacity Up To 48 Liters (51 U.s. Quarts)
|Air Inlet System|
|Flywheels and Flywheel Housing|
|Power Take Off (PTO)|
|U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment|
|U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment|
Other Models in this Category
- C1.1 Tier 4 Industrial Power Unit - 18395426
- C1.5 Tier 4 Industrial Power Unit - 18395494
- C2.2 Tier 4 Industrial Power Unit - 18395551
- C3.4B Industrial Power Unit < 55 kW - 18444432
- C3.4B Industrial Power Unit > 55 kW - 1000003138
- C4.4 ACERT- Tier 4 Industrial Power Unit - 18395606
- C7.1 ACERT- Tier 4 Industrial Power Unit - 18395688
- C9.3 ACERT Tier 4 Industrial Power Unit - 18395733
- C13 ACERT Tier 4 Industrial Power Unit - 18395806
- C18 ACERT- Tier 4 Industrial Power Unit - 18395947