New | C12 Propulsion Engine

Cat® C12 Diesel Marine Propulsion Engines, with ratings of 340-490 bhp (254-366 bkW) at 1800-2300 rpm, meet IMO II emission standards with the exception of the 497 mhp (490 bhp) rating at 2300 rpm which meets IMO I emissions standards. The C12 takes full advantage of the electronically controlled unit injection fuel system, resulting in an environmentally friendly engine with outstanding performance and fuel economy. There is also a wide range of optional equipment available to meet the needs of your marine commercial or pleasure craft application.

Power Rating
Power Range340-490 bhp (254-366 bkW)
Engine Specifications
Speed Range1800-2300 rpm
ConfigurationIn-line 6, 4-Stroke-Cycle Diesel
AspirationTA
Bore5.1 in
Stroke5.9 in
Displacement732.0 in3
Rotation (from flywheel end)Counterclockwise
EmissionsIMO I, IMO II
Dimensions & Weights
Length62.0 in
Width38.1 in
Height39.5 in
Dry Weight2588.0 lb

More Control Inputs And Outputs, Capacity For Additional Features, Additional Monitoring Capabilities, Expansion Capability For Future Enhancements

Adjustment Free Control Of Engine Speed, Customer Defined Operating Characteristics, Protection And Warning System, Optional Display Systems Available

The Electronic Control System Has Additional Capacity For Future Enhancements To Ensure A Long Useful Engine Life.

Provides A Smoother Passage For Improved Exhaust Gas Flow To The Turbocharger Which Leads To More Usable Energy And Lower Exhaust Temperatures.

The C12 Has The Same Physical Size, Same Footprint, And The Same Connection Points As The 3196 Engine As Well The Same Optional Attachments.

Caterpillar Offers Several “plug And Play” Monitoring Systems Which Display Everything From The Basic Engine Operating Parameters To Engine Load Factor And Trip Totals. Ask Your Local Caterpillar Dealer For Additional Information On Our Marine Power Display (mpd), Marine Analog Power Display (mapd), And Our Engine Vision Display (evd).

Trained Technicians At Over 1800 Authorized Service Locations Worldwide Support Caterpillar Products. Use Our Internet Dealer Locator Www.cat.com To Identify The Caterpillar Dealer Location Nearest To You.

C-12 Marine Propulsion Engines Used In Commercial Applications Are Covered For 12 Months From The Date Of Delivery To The End User. Engines Used In Non-revenue Producing Pleasure Craft Applications Are Covered For 24 Months, Unlimited Hours, From The Date Of Delivery. Concurrently, Specific Engine Components Are Covered For 60 Months, Unlimited Hours, From The Date Of Delivery To The End User.

Optional Engine Protection Coverage For Up To 60 Months From Date Of Delivery May Be Purchased Through Your Local Caterpillar Dealer.

Air Inlet System
  • Aftercooler - sea water; corrosion resistant, Air Cleaner/Fumes Disposal (closed system), Turbocharger, Jacket Water Cooled
Control System
  • Electronic governing, Cold mode start strategy, Power compensation for fuel temperature, Programmable low idle, Electronic diagnostics and fault logging, Engine and transmission monitoring (speed, temperature, pressure), Fuel/air ratio control, Emergency stop switch (A&B ratings only)
Cooling System
  • Thermostat and housing, Jacket water pump; gear driven, Sea water pump; rubber impeller; self-priming; gear-driven, Integral heat exhanger/expansion tank; removable tube bundle; replaceable copper-nickel tubes, Keel cooling - combined circuit (includes pipe thread flange kit)
Exhaust System
  • Watercooled Manifold & Turbocharger
Flywheels & Flywheel Housings
  • Flywheel; SAE No. 1; 113 teeth, Flywheel housing; SAE No. 1 (10 degree slant pad), SAE standard rotation
Fuel System
  • Fuel filer; RH service on Port; LH service on Starboard, Fuel transfer pump, Fuel priming pump, Flexible fuel lines
Instrumentation
  • Service meter, electric
Lube System
  • Crankcase breather, Oil cooler, Oil filter; spin-on; RH service on Port; LH service on Starboard, Oil filler, Dipstick; RH service on Port; LH service on Starboard, Oil pump; gear driven
Mounting System
  • Front support
Power Take-Offs
  • Hydraulic pump drive; SAE A; 11 tooth spline, 57 ft-lbs max torque; counterclockwise as viewed from the rear of hte engine looking into the pump drive and turns 1.41 x engine speed, Crankshaft pulley; 345 mm (13.6 in) single groove; 15.88 mm (.63in) width
Protection System
  • Shutdown; electronic; 12 or 24 volt; energized to run
General
  • Vibration damper, Lifting eyes, RH or LH service options, Literature, Variable engine wiring, Upper rear-facing customer wiring connector and ECAP connection, Electronic installation kit (connectors, pins, sockets)

listofrelationships

original

Other Models in this Category

Select Marine Power System Type


Hawthorne Power Systems Logo

Why Cat is Better. Machine Comparison

"
With only a few days notice, we were able to get the emergency system working properly. Hawthorne Cat provided great leadership and excellent field support.
Mark Cripe
Helix Electric
"

San Diego - Power
Steve Jamison
Power Systems Sales Manager
858.376.6821 office
858.688.0083 mobile
sjamison@hawthornecat.com

Phillip J. Smith (PJ)
Service Manager - CSA Group/Truck Shop
858.376.6874 office
858.688.0134 mobile
psmith@hawthornecat.com

Joel Gollihur
Truck Service Manager
858.376.6841 office
858.688.0084 mobile
jgollihur@hawthornecat.com

Paul Karpf
Rental Department Manager
858.376.6888 office
858.688.0039 mobile
pkarpf@hawthornecat.com

Hawaii – Power
Cliff Yuen
Power Systems Sales Manager
808.676.0322 office
808.349.7767 mobile
cyuen@hawthornecat.com

Travis Tilton
General Service Manager
808.676.0314 office
808.864.1903 mobile
ttilton@hawthornecat.com

Bobby Fields
Rental Developer
808.676.0267 office
808.368.5445 mobile
bfields@hawthornecat.com

Guam – Power
Myver Hecita
Power Systems Rental &
Sales Representative
671.649.4241 office
671.898.2740 mobile
mhecita@hawthornecat.com

Jimmy Cruz
Engine Service Manager
671.649.4216 office
671.488.2821 mobile
jpcruz@hawthornecat.com