New | Cat C280 Marine Auxiliary Engines

Power Rating
Minimum Rating2320.0 bhp
Maximum Rating7268.0 bhp
Engine Specifications
ConfigurationIn-Line 6, Vee 8, Vee 12, Vee 16, 4-Stroke-Cycle Diesel
AspirationTA
Bore11.0 in
Stroke11.8 in
Dimensions & Weights
Minimum Length145.0 in
Maximum Length197.0 in
Maximum Width69.0 in
Minimum Width67.0 in
Minimum Height108.0 in
Maximum Height140.0 in
Minimum Dry Weight34496.0 lb
Maximum Dry Weight62832.0 lb

Can J1939 Data Link Waterproof Connectors, Maintenance-free, Backup Ecu For Redundant Governing

Load Feedback, Programmable Droop, Adjustable Gain, Adjustable Fuel/air Ratio Control, Histograms Of Engine Operation, Cat Messenger Display Presents Diagnostics And Other Engine Parameters

Engine Speed, Boost Pressure, Throttle Position, Fuel Consumption Rate, Inlet Manifold Temperature, Diagnostic Codes And Events, Configuration, Desired Engine Speed, Battery Voltage, Engine Load, Lifetime Totals — Engine Hours, Fuel Burned, Idle Fuel, Idle Hours, Trip Totals — Average Fuel Rate, Idle Fuel, Idle Hours, Engine Hours, Fuel Burned, Trip Reset

Interfaces With Standard Cat® Marine Monitoring System (plc In Price List) Provides Visual Indication Of Ecu Functionality, Accepts 4 — 20 Ma Or Pwm Remote Throttle Speed Input, Marine Alarm And Protection

“drop-in” Installation, No Threaded Fuel Connections, High Pressure Inside Injector Only, Does Not Require Double Wall Fuel Lines Or Leak Collection Device, Injector Synchronization Not Required

Standard Equipment

AIR INLET SYSTEM
  • R INLET SYSTEM Aftercooler, fresh water, corrosion resistant coated (air side) Air inlet shutoff Breather, crankcase, top-mounted Turbocharger, rear-mounted, engine oil lubricated
CONTROL SYSTEM
  • Single Caterpillar A-III Electronic Engine Control Modules with Electronic Unit Injector Fuel System Rigid Wiring Harness (10 amp 24volt power required to drive Electronic Engine Control Modules)
COOLING SYSTEM
  • Engine coolant water drains
EXHAUST SYSTEM
  • Dry, gas tight, exhaust manifold
FUEL SYSTEM
  • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38 degrees C) Fuel transfer pump (mounted on left hand side) Duplex fuel filters Electronically Controlled Unit Injectors
LUBE SYSTEM
  • Centrifugal oil filters with single shutoff. Service side engine mounted on cylinder block inspection covers. Includes installed oil lines and single shutoff valve. Filters centrifuge bypass oil from the main lubricating oil pump. Can be serviced with the engine running. Oil filler and dipstick Valve, oil pressure regulating Valves, crankcase explosion relief
GENERAL
  • Paint, Caterpillar yellow Pumps, gear driven: fuel, oil, jacket water, aftercooler/oil cooler water
SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
  • Service literature. Included standard with each engine are two (2) complete sets of service literature listed below: 1. Custom parts book CD (serial number specific) 2. Service manual, which includes: Operation & Maintenance, Specifications, Systems Operation, Testing and Adjusting, Disassembly and Assembly manual. Available in paper media and English language only. 3. Technical manual (parts/service information for special equipment). Available in paper media in English language only. NOTE: Custom parts book CD and service manual can be re-ordered through the normal Caterpillar literature ordering system. The technical manual can only be re-ordered through the Project Services at the Caterpillar Lafayette Engine Center facility.

Optional Equipment

AVAILABLE ON-SITE POWER
AIR INLET SYSTEM
  • Air Cleaners
COOLING SYSTEM
  • Jacket Water Heaters
  • Heat Recovery System
  • Heat Recovery Thermostats
  • Cooling System Connection Groups
  • De-Aerator
CONTROL SYSTEM
  • Load Sharing module
  • Direct Rack Module
EXHAUST SYSTEM
  • Outlet Expander
  • Flexible Exhaust Fittings
  • Weld Flange - Optional
FUEL SYSTEM
  • Fuel Priming Pump
  • Duplex Primary Fuel Strainer
  • Fuel System Connections
LUBE SYSTEM
  • Oil Pan Drain Valve
  • Prelubrication Connections
  • Lube Oil Heater
MOUNTING SYSTEM
  • Vibration Isolators
MARINE SOCIETY REQUIREMENTS
  • Spray shielding
PROTECTION SYSTEM
  • PLC Monitoring System Options
  • ECP Relay System Options
  • ECP Mechanical Gauge Instrument Panel
  • Turbocharger Speed Sensor
  • Cylinder Pressure Relief Valve
  • Oil Mist Detector
  • Protection System Components
  • Magnetic Pickup
SPARE PART KITS
  • Intake and Air System
  • Basic Engine
  • Cylinder Head
  • Fuel System
  • Cooling System
  • Instrumentation
  • Cylinder Valve Kits
STARTING SYSTEM
ENGINE TESTING
  • Basic System Testing
  • Special Witness Test
  • Torsional Vibration Analysis
SERVICE TOOLS / SHIPPING PROTECTION / FACTORY SUPPORT
  • Commissioning
  • Service Tools
  • Factory Packaging
  • Shipping Protection-Shrink Wrap or Tarp
  • Shipping Protection-Export Boxing
  • AID Emblem
  • Storage Preservation

listofrelationships

original

Other Models in this Category

Select Marine Power System Type


Hawthorne Power Systems Logo

Request a Quote

Why Cat is Better. Machine Comparison

"
With only a few days notice, we were able to get the emergency system working properly. Hawthorne Cat provided great leadership and excellent field support.
Mark Cripe
Helix Electric
"

San Diego - Power
Steve Jamison
Power Systems Sales Manager
858.376.6821 office
858.688.0083 mobile
sjamison@hawthornecat.com

Phillip J. Smith (PJ)
Service Manager - CSA Group
858.376.6874 office
858.688.0134 mobile
psmith@hawthornecat.com

Paul Karpf
Rental Department Manager
858.376.6888 office
858.688.0039 mobile
pkarpf@hawthornecat.com

Tom Bonham
Product Support Sales Manager
858.376.6898 office
442.248.2108 mobile
tbonham@hawthornecat.com

Hawaii – Power
Cliff Yuen
Power Systems Sales Manager
808.676.0322 office
808.349.7767 mobile
cyuen@hawthornecat.com

Guam – Power
Myver Hecita
Power Systems Rental &
Sales Representative
671.649.4241 office
671.898.2740 mobile
mhecita@hawthornecat.com

Richard Nostratis
Service Manager
671.649.4212 office
671.898.2735 mobile
rnostratis@hawthornecat.com