6015

6015 Hydraulic Shovel

6015 Hydraulic Mining Shovel

DESCRIPTION

The Cat® 6015 Hydraulic Shovel lets you move more material at a lower cost, so you can achieve production targets, deliver on your commitments, meet deadlines and maximize your profitability. With class-leading tool carrying capacity, increased durability and the most powerful engine in its class, the Cat 6015 generates higher productivity and fuel efficiency than other shovels. And it’s offered with more and better options that let you match your machine to your operation — from access and cold weather packages to multiple stick and track pad options. In addition, a large range of buckets is available, giving you optimum payload and machine efficiency for your operation. And the 6015’s high tool carrying capacity gives you the ability to employ large buckets and move more in fewer cycles.

SAFETY

  • Operator Protective Guard (Top Guard) certified cab plus optional front guard.
  • Excellent visibility with unobstructed view of digging environment and upward view through skylight, plus optional two-camera system to reduce blind spots and enhance situational awareness.
  • Safer access and egress with anti-slip walkways and optional powered 45-degree access stairway.
  • Five emergency shut-off switches, with one easily accessible in the cab to shut down the electrical system in case of emergency.
  • Safer service with lockable starter and battery isolation switch cabinet.

OPERATOR CAB

  • Heated, pneumatically-cushioned and fully adjustable suspension seat that provides height and weight adjustments, lumbar support, wide arm/wrist rests and a wide retractable seat belt for full operator comfort and support.
  • Maintained internal ambient temperature with air conditioning, heat and defroster, and improved filtration with fresh air filter that removes dust and particles, plus a second internal filter that cleans recirculated air inside the cab.
  • Easily accessible ergonomic joysticks with Electronic-Hydraulic Servo Control, which delivers dynamic and precise response and ensures no hydraulic lines are present in the cab.
  • Large, 7 in (178 mm) color touchscreen for convenient troubleshooting and service assistance.
  • Independently adjustable joystick consoles, plus joystick controls that allow pattern to be changed for enhanced safety and improved operator experience.

RELIABILITY & DURABILITY

  • Rugged Cat heavy duty undercarriage designed to increase uptime, deliver longer service life and withstand increased tramming over rough mine site terrain, with features such as grease lubrication, GLT4 sealing technology and oil-filled rolling components that help it last at least 2,000 hours longer than dry track designs.
  • Cat exclusive Positive Pin Retention 2 (PPR2) track design, which mechanically locks the link to the pin to resist pin walking and link cracking to deliver reliable sealing and maximum track life.
  • Heavy duty fixed-axle rollers and idlers for improved performance, increased wear life, reduced internal friction and overheating, and elimination of grease consumption and lines.
  • Heavy duty track group, which handles high field loads, and reduced pitch extension wear, which increases track chain life by 20% to 40%.
  • Structures designed and fabricated to withstand the toughest digging conditions, with high-strength steel; full penetration, profiled and ground welds at critical junctures; and booms and sticks that are stress-relieved after welding.
  • Efficient Independent Oil Cooling system, which protects and extends the life of hydraulic components.

PRODUCTIVITY & PERFORMANCE

  • Faster cycle times and increased productivity thanks to Cat C27 engine, which is the most powerful in its class and provides top performance over an exceptional service life.
  • Fast cycle times and improved energy efficiency delivered by closed-loop swing system, which also generates less heat.
  • Proportional Priority Pressure Compensating (PPPC) hydraulic system, which varies hydraulic oil flow for smooth, predictable operation and greater operator efficiency.
  • Load Enhanced Anticipatory Control (LEAC), which ensures faster and more consistent engine regulation by preventing lug, which, in turn, reduces fuel consumption.
  • Engine Torque Load Control (ETLC), which reduces hydraulic pump output based on available engine torque, desired engine speed, actual engine speed and estimated hydraulic load — providing power to the functions that need it to move material quickly and efficiently.

BUCKETS & GET

  • Buckets and ground engaging tools (GET) designed to maximize durability and productivity, ideally matched to your shovel and application, and rebuildable, with wear components available as service parts.
  • Integrated to work as part of a machine system — helping you achieve high productivity and the lowest cost per ton.
  • Hammerless GET designed specifically for the 6015, with no special tools required for removal and installation.
  • New standard rock bucket equipped with the new M75 GET, which is 20% stronger than the previous C70 GET and moves 8.1 m3 (10.6 yd3) of material, carrying up to 14.6 tonnes (16.1 tons).
  • Wear packages that protect your investment, including special liner material and lip shrouds, wing shrouds and heel shrouds.

CONNECTIVITY & TECHNOLOGY

  • Greater connectivity with improved Product Link™ Elite system, which increases the availability of data provided by the 6015 and allows it to collect and transmit information into locally hosted or cloud-hosted applications.
  • Factory-ready for Cat MineStar™ Solutions, with a range of capabilities that meet the needs of your fleet.
  • MineStar Health, which lets you collect and monitor machine data so you can be proactive and maximize uptime.
  • MineStar Edge™, which makes it possible to measure, manage, analyze and optimize your entire operation.
  • Designed for the future, with expandable electronic systems that allow smooth integration of MineStar or other electronic capabilities.

SERVICEABILITY

  • Access to Cat Electronic Technician, which helps dealer service personnel more easily diagnose and prevent issues.
  • Enhanced warning levels for hydraulic oil temperature and improved data link diagnostics for reduced downtime.
  • Visual inspection ports for slew drive pinions and ring gear, commonization of charging ports and charging tool and new electronic pilot pressure monitoring via ET.
  • Ground-level service station that provides easy access to fast-fill diesel fuel and grease connections.
  • Maintenance-free Positive Pin Retention tracks that are specially machined to extend internal pin/bushing wear life and fatigue resistance.

SUSTAINABILITY

  • Highly regulated C27 engine certified to meet U.S. EPA Tier 4 Final/EU Stage V emissions standards without the need for DEF — saving time and cost during maintenance.
  • Reduce fuel consumption with Load Enhanced Anticipatory Control (LEAC) system.
  • Sound-suppressed power module to keep spectator sound levels low.
  • Preservation of raw materials, energy conservation and reduced emissions through the Cat Reman and Cat Rebuild programs, which return end-of-life components to like-new condition.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • Cat Powertrain
    • 2 x Cat 3512E engines
    • Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution
    • Air-to-Air After Cooling (ATAAC)
    • Turbocharger
    • Hydraulically driven radiator fan
    • Electronically controlled fan speed
    • Micro processed engine management
    • Heavy-duty air filters
    • Two-stage fuel filter with series filtration
    • High-capacity water seperator
    • Starting aid -- automatic ether
    • Exhaust manifold and turbo heat shields
    • Dual 24 V electric starters per engine
    • Automatic engine idle shut down
    • Automatic fuel priming
  • Hydraulics
    • Hydraulic Optimization
    • Operator Assist: Enhanced Motion Control
    • Cat Hydraulic Hose assemblies
    • Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature
    • Pressure cut-off for main pumps
    • Cooling of pump transmission gear oil
    • Closed loop swing circuit
    • Pressure testing points
    • Full-flow high-pressure filters (100 μm), main pumps
    • High pressure filters (100 μm), closed swing circuit
    • Full-flow filters (10 μm), return circuit
    • Pressure filters swing charge circuit (40 μm)
    • Pressure filters pilot circuit (6 μm)
    • Transmission oil filters (40 μm)
    • Boom float valve (FS and BH)
    • Stick float valve (FS)
  • Electrical System
    • 6 Maintenance-free batteries
    • Lockable battery isolator switch
    • Lockable starter isolator switch
    • 13 LED high-brightness working flood lights
    • 17 LED service lights
    • 2 acoustic travel alarms – forward and reverse (power module, oil cooler module)
    • 2 electric horns (1 cab module, 1 oil cooler module)
  • Undercarriage
    • HD tracks with cast double-grouser track pads
    • 1400 mm (4'7") wide track pads
    • HD fixed axle carrier and load rollers
    • HD fixed axle idlers
    • Automatic hydraulic retarder valve
    • Hinged travel motor covers
    • Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
    • Fully hydraulic self-adjusting track tensioning system with piston accumulators
  • Automatic Lubrication System
    • Rectangular grease container (fill via service station)
    • Lubricated pinion in swing ring
    • Grease filters (200 μm)
  • Operator Environment
    • Single hydraulically driven HVAC system
    • In-floor window with removable grate
    • Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown
    • Independently adjustable seat consoles with integrated joysticks
    • Electronic-Hydraulic Servo Control
    • Elevated full-size trainer seat with 2-point safety belt and laptop desk
    • Additional fold-away auxiliary seat with 2-point safety belt
    • Three cup holders
    • FM/AM radio with USB and AUX input
    • Parallel intermittent wiper/washer
    • Roller blinds
    • Monitoring system with 254 mm (10 in) color touchscreen
    • 45° stairway from engine bay to operator cab
    • Powered 45° access stairway
    • Heated mirror on LH side
    • Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
    • Level indicators for length and crosswise inclination
    • Document Storage
  • Front Attachment
    • Service access holes from both sides in boom and stick (FS and BH)
    • Boom and stick thermally stress relieved after welding
    • Catwalks with rails at boom (FS and BH)
    • Wear Package (as per bucket selection)
  • Cat Technology
    • Cat Product Link™ Elite (Cellular)
    • Cat MineStar™ Solutions Ready
  • Service and Maintenance
    • Engine oil exchange interval -- 500 hours
    • Hydraulic oil change interval – 10,000 hours
    • Scheduled Oil Sampling (S·O·SSM) ports
    • Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil
    • Cat battery charging connector
    • Indicator lights
    • Cat Electronic Technician service port
    • Dirt wiper at swivel
  • Safety and Security
    • Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
    • Operator Protective Guard (Top Guard)
    • All-round safety glass
    • Emergency egress ladder
  • Miscellaneous
    • ISO or ANSI decals

Optional Equipment

  • UNDERCARRIAGE
    • Track guards – full length
    • Track guards – center
    • Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)
  • COLD WEATHER OPTIONS
    • Starting aid – cold weather
    • 120 V or 240 V cold weather package
    • Fuel heater
    • Heated cab mirror
    • Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced
  • SUPERSTRUCTURE
    • Copper Mesabi or aluminum bar plate engine cooling packages
    • LED working lights
    • Powered 45° access stairway
    • Camera Monitoring System (2 cameras and additional color display)
  • CAB
    • Operator Protective Guard (Front Guard)
    • Product Link Elite radio options (Cellular, Satellite, No Radio)
  • ATTACHMENT
    • 3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick
  • BUCKETS
    • Additional buckets available, based on application, through your local Cat dealer

Specs

Overview

Long Name:
6015 Hydraulic Shovel
Name:
6015
Brand:
Cat
Status:
Current

General

Engine Output - SAE J1995
824 HP / 615 kW
Bucket Payload
16.1 ton (US) / 14.6 t
Operating Weight
154.3 ton (US) / 140 t
Note
Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available.

Engine - U.S. EPA Tier 4 Final

Engine Model
Cat® C27
Gross Power - SAE J1995
824 HP / 615 kW
Net Power - SAE J1349
746 HP / 556 kW

Engine - Cat C27 with Tier 4 Final Emission Standards

Number of Cylinders
12
Bore
5.4 in / 137.2 mm
Stroke
6 in / 152.4 mm
Displacement
1648 in³ / 27 l

Engine - Equivalent to U.S. EPA Tier 2

Engine Model
Cat® C27
Gross Power - SAE J1995
839 HP / 626 kW
Net Power - SAE J1349
746 HP / 556 kW

Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards

Number of Cylinders
12
Bore
5.4 in / 137.2 mm
Stroke
6 in / 152.4 mm
Displacement
1648 in³ / 27 l
Aspiration
Turbocharged and air-to-air aftercooled

Engine

Emissions
U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1

Operating Weights - Backhoe

Operating Weight
154 ton (US) / 140 t

Weights

Ground Pressure
23.6 psi / 16.3 N/cm²
Note
Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants

Track

Standard
28 in / 700 mm
Wide
36 in / 900 mm
Extra Wide
39 in / 1000 mm
Number of Shoes - Each Side
46
Number of Track Rollers - Each Side
9
Number of Carrier Rollers - Each Side
3
Track Pads
Double grouser

Drive

Travel Speed - Two Stages - 1st Stage - Maximum
1.4 mile/h / 2.3 km/h
Travel Speed - Two Stages - 2nd Stage - Maximum
2.1 mile/h / 3.3 km/h
Maximum Drawbar Pull - Forward
192886 lbf / 858 kN
Maximum Drawbar Pull - Reverse
220987 lbf / 983 kN
Gradeability - Travel Drives
Approximately 42%
Hydraulic Track Tensioning
With accumulator

Service Refill Capacities

Fuel Tank
449 gal (US) / 1700 l
Cooling System
44 gal (US) / 165 l
Engine Oil
23 gal (US) / 87 l
Swing Drive
2.4 gal (US) / 9 l
Hydraulic System - Including Tank
463 gal (US) / 1752 l
Hydraulic Tank
253 gal (US) / 956 l
Grease Tank
18 gal (US) / 68 l

Electrical System

System Voltage
24 V
Batteries
4 × 200 Ah (12 V each)
Alternator Rating
150 A (24 V) in total
Components (1)
Emergency stop in cabin, engine module, pump room and on service station accessible from ground level
Components (2)
Four maintenance free batteries
Components (3)
Lockable battery isolation switch
Components (5)
14 LED high-brightness working lights
Components (4)
5 LED service lights
Components (6)
2 electric horns
Components (7)
Two (2) lights for rear end
Components (9)
One (1) beacon light on cabin roof
Components (8)
One (1) light for machine deck/service

Hydraulic System

Main Pumps
3 × variable swash plate pumps
Main Pumps - Maximum Total Oil Flow
407 gal/min / 1544 l/min
Main Pumps - Maximum Pressure - Attachment
4641 psi / 320 bar
Pilot Pump
1 × gear pump
Pilot Pump - Maximum Flow, Pilot
40.4 gal/min / 153 l/min
Pilot Pump - Maximum Pressure, Pilot
1378 psi / 95 bar
Main Pumps - Maximum Pressure - Travel
4641 psi / 320 bar
Swing Pump
1 × variable swash plate pump
Engine Fan Pump - Maximum Flow, Engine Fan
53.1 gal/min / 201 l/min
Engine Fan Pump - Maximum Pressure, Engine Fan
3191 psi / 220 bar
Engine Fan Pump
1 × variable swash plate pump
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan
22.7 gal/min / 86 l/min
Swing Pump - Maximum Flow - Swing
127 gal/min / 479 l/min
Hydraulic Fan Pump
1 × variable swash plate pump
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan
1958 psi / 135 bar
Swing Pump - Maximum Pressure - Swing
5294 psi / 365 bar
Hydraulic Oil Cooling - Maximum Flow
284 gal/min / 1075 l/min
Hydraulic Oil Cooling - Diameter of Fan
40 in / 1016 mm
Filters (1)
Full-flow high-pressure filters (200 μm) for main pumps
Filters (2)
Full-flow filters (20 μm) for complete return circuit
Filters (3)
Pressure filters (16 μm) for servo circuit
Filters (4)
Full-flow filters (6 μm) for engine cooling return circuit
Filters (5)
Swing charge filter (15 μm)
Filters (6)
Pump case return screens (125 μm)

Swing System

Swing Drive
Two (2) compact planetary transmissions with axial piston motors
Parking Brake
Wet multiple disc brake, spring-loaded/hydraulically released
Maximum Swing Speed
4.9 r/min / 4.9 r/min
Swing Ring
Cross roller bearing with sealed internal gearing
Features (1)
Closed-loop swing circuit with speed control
Features (2)
Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
Features (3)
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system

Centralized Service Area

Feature
Accessible from ground level
Equipped With (1)
Emergency stop
Equipped With (2)
Quick couplings for: Diesel fuel and Grease

Undercarriage

Travel Speed - Two Stages - 1st Stage - Maximum
1.6 mile/h / 2.6 km/h
Travel Speed - Two Stages - 2nd Stage - Maximum
2.3 mile/h / 3.7 km/h
Maximum Drawbar Pull - Forward
192886 lbf / 858 kN
Maximum Tractive Force
197157 lbf / 877 kN
Maximum Drawbar Pull - Reverse
220987 lbf / 983 kN

Drive

Maximum Drawbar Pull
179847 lbf / 800 kN

Undercarriage

Gradeability - Travel Drives
38°/78% (SAE J1309)
Hydraulic Track Tensioning
With accumulator
Number of Shoes - Each Side
46
Number of Track Rollers - Each Side
9
Number of Carrier Rollers - Each Side
3
Components (1)
Forged double-grouser track pads
Components (2)
Chain links connected by hardened pins and bushings
Components (3)
Postive Pin Retention (PPR2) sealed and greased track design
Components (4)
All running surfaces of sprockets, idlers, rollers and track chain links hardened
Components (5)
Fully hydraulic self-adjusting track tensioning system with accumulator
Components (6)
Automatic hydraulic retarder valve to prevent overspeed on downhill travel
Components (7)
Audible travel alarm

Operator's Cab

Components (1)
Pressurized operator station with positive filtration
Components (2)
Heated cab mirror
Components (3)
Sliding upper door window (left-hand cab door)
Components (4)
Glass-breaking safety hammer
Components (5)
Removable lower windshield with in cab storage bracket
Components (6)
Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM
Components (7)
Beverage holder
Components (8)
Literature holder
Components (9)
AM/FM radio
Components (10)
Radio with MP3 auxiliary audio port
Components (11)
Two stereo speakers
Components (12)
Storage shelf suitable for lunch or toolbox
Components (13)
Color LCD display with warning, filter/fluid change, and working hour information
Components (14)
Adjustable armrest
Components (15)
Height-adjustable joystick consoles
Components (16)
Neutral lever (lock out) for all controls
Components (17)
Travel control pedals with removable hand levers
Components (18)
Two power outlets, 10 amp (total)
Components (19)
Laminated glass front upper window and tempered other windows

Automatic Lubrication System

Capacity - Grease Barrel
18 gal (US) / 68 l
Type (1)
Central bank lubrication system
Type (2)
Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing
Type (3)
Standard grease reel on machine for bucket linkage
Type (4)
Grease refill service point accessible from ground

Attachments

Type (1)
Boom and stick torsion-resistant with welded box design
Type (2)
High-tensile steel with solid steel castings at pivot areas
Type (3)
Boom and stick stress-relieved after welding
Type (4)
Float valve for boom down function
Buckets Equipped With
– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds

Backhoe Attachment (BH) - Working Range

Maximum Digging Depth
26.3 ft / 8 m
Maximum Digging Reach
45.6 ft / 13.9 m
Maximum Digging Height
41.9 ft / 12.8 m
Maximum Dump Height
27.9 ft / 8.5 m

Backhoe Attachment (BH) - Digging Forces

Bucket Digging Force - ISO
120947 lbf / 538 kN
Bucket Digging Force - SAE
112600 lbf / 501 kN
Stick Digging Force - ISO
104761 lbf / 466 kN
Stick Digging Force - SAE
98800 lbf / 439 kN

Backhoe Attachment (BH) - Backhoe

Capacity 1:1
10.6 yd³ / 8.1 m³
Total Width
8.8 ft / 2682 mm
Number of Teeth
5
Tooth System
Cat C70 or M75
Weight - Including Standard Wear Package
18521 lb / 8401 kg
Maximum Material Density - Loose
3030 lb/yd³ / 1.8 t/m³

Weights

Operating Weight
308000 lb / 140000 kg

SEE HOW 6015 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Hydraulic Mining Shovels
6015
6015 Hydraulic Mining Shovel
Brand
Cat
Status
Current
Engine Output - SAE J1995
824 HP / 615 kW
Bucket Payload
16.1 ton (US) / 14.6 t
Operating Weight
308000 lb / 140000 kg
Note
Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants
Gross Power - SAE J1995
839 HP / 626 kW
Net Power - SAE J1349
746 HP / 556 kW
Bore
5.4 in / 137.2 mm
Stroke
6 in / 152.4 mm
Displacement
1648 in³ / 27 l
Aspiration
Turbocharged and air-to-air aftercooled
Emissions
U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1
Swing Drive
Two (2) compact planetary transmissions with axial piston motors
System Voltage
24 V
Components (1)
Pressurized operator station with positive filtration
Components (2)
Heated cab mirror
Components (3)
Sliding upper door window (left-hand cab door)
Components (5)
Removable lower windshield with in cab storage bracket
Components (4)
Glass-breaking safety hammer
Components (6)
Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM
Components (7)
Beverage holder
Components (9)
AM/FM radio
Components (8)
Literature holder
Main Pumps
3 × variable swash plate pumps
Swing Ring
Cross roller bearing with sealed internal gearing
Maximum Tractive Force
197157 lbf / 877 kN
Components (10)
Radio with MP3 auxiliary audio port
Components (11)
Two stereo speakers
Type (1)
Boom and stick torsion-resistant with welded box design
Type (2)
High-tensile steel with solid steel castings at pivot areas
Type (3)
Boom and stick stress-relieved after welding
Type (4)
Float valve for boom down function
Selected Model
Hydraulic Mining Shovels
6030
6030 Face Shovel
Brand
Caterpillar
Status
Current
Engine Output - SAE J1995
1649 HP / 1230 kW
Bucket Payload
33 ton (US) / 30 t
Operating Weight
324 ton (US) / 294 t
Note
Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants.
Gross Power - SAE J1995
1531 HP / 1142 kW
Net Power - SAE J1349
1425 HP / 1063 kW
Bore
5.42 in / 137.7 mm
Stroke
6 in / 152.4 mm
Displacement
1648 in³ / 27 l
Aspiration
Turbocharged and air-to-air aftercooled
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
Swing Drive
2 compact planetary transmissions with axial piston motors
System Voltage
24V
Components (1)
Under roof mounted heating ventilating and air conditioning system
Components (2)
External sun shields at side and rear windows
Components (3)
Robust instrument panel including large colored BCS screen with transflective technology
Components (5)
Hydraulically operated 45 degree access stairway
Components (4)
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
Components (6)
Emergency egress ladder with ladder cage
Components (7)
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components (9)
Roller blinds at all windows
Components (8)
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Main Pumps
4 x variable swash plate pumps
Swing Ring
Triple-race roller bearing with sealed internal gearing
Maximum Tractive Force
360144 ft·lbf / 1602 kN
Components (10)
Windshield with parallel intermittent wiper/washer
Components (11)
All-round safety glass, armored windshield and sliding side window
Type (1)
Catwalks with rails at booms
Type (2)
Special wear packages for highly abrasive materials on request
Type (3)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type (4)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
More Details
Hydraulic Mining Shovels
6020B
6020B Hydraulic Mining Shovel
Brand
Caterpillar
Status
Current
Engine Output - SAE J1995
1040 HP / 776 kW
Bucket Payload
24 Sh Ton / 22 t
Operating Weight
254 ton (US) / 230 t
Note
Specifications shown above apply to a Backhoe configuration. A frontless configuration is also available.
Gross Power - SAE J1995
1033 HP / 771 kW
Net Power - SAE J1349
1032 HP / 770 kW
Bore
5.71 in / 145 mm
Stroke
6.38 in / 162 mm
Displacement
1959 in³ / 32 l
Aspiration
Turbocharged and air-to-air aftercooled
Emissions
Meets China Nonroad Stage III emissions standards, equivalent to Tier 2
Swing Drive
2 compact planetary transmissions with axial piston motors
System Voltage
24V
Components (1)
Hydraulically driven radiator fan with variable electronically controlled fan speed
Components (2)
Dual Diesel Oxidation Catalysts (DOCs)
Components (3)
Heavy-duty air filters
Components (5)
Additional high-capacity water separator including electric priming pump
Components (4)
Hydraulically driven radiator fan with variable electronically controlled fan speed
Components (6)
Heavy-duty air filters
Components (7)
Two-stage fuel filter
Components (9)
Large fuel tank allows for 24 hour machine operation
Components (8)
Additional high-capacity water separator including electric priming pump
Main Pumps
6 × variable swash plate pumps
Swing Ring
Triple-race roller bearing with sealed internal gearing
Maximum Tractive Force
265860 lbf / 1183 kN
Components (10)
Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
Components (11)
Additional emergency ladder in close proximity to emergency escape window
Type (1)
Boom and stick torsion-resistant with welded box design
Type (2)
High-tensile steel with solid steel castings at pivot areas
Type (3)
Boom and stick stress-relieved after welding
Type (4)
Catwalks with rails at boom
More Details