966 XE

966 XE

The Cat® 966 XE Wheel Loader delivers increased fuel efficiency, premium performance with simple-to-use standard technologies to boost operator efficiencies, and lower maintenance costs. This machine is designed to meet emission standards without interrupting operation. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.

966 XE

DESCRIPTION

The Cat® 966 XE Wheel Loader delivers increased fuel efficiency, premium performance with simple-to-use standard technologies to boost operator efficiencies, and lower maintenance costs. This machine is designed to meet emission standards without interrupting operation. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.

Superior Fuel Efficiency

  • Up to 35% better fuel efficiency compared to previous Cat model.
  • Deep system integration of the Cat continuously variable transmission, engine, hydraulic, and cooling systems results in significantly increased performance and fuel efficiency.
  • Eliminating the torque converter allows the capability to control engine rpm and machine speed independently, resulting in efficient digging, fine control, and easy operation.
  • Lower rated engine speed reduces component wear and operating noise.
  • Power dense engine burns less fuel by providing power and torque when needed.

Achieve Greater Productivity

  • Continuously variable transmission delivers smooth, fast acceleration and speed on grade.
  • Machine maneuvering on grade is made easy with speed-hold and anti-rollback.
  • Integrated continuously variable transmission provides maximum, steady power at optimal speeds.
  • Advanced rimpull control for best loading efficiency in the pile and tire wear reduction.
  • New Autodig with Auto Set Tires for consistent high bucket fill factors.
  • Application Profiles optimize machine settings for different applications at one push of a button.
  • Job Aids help operators improve and optimize their operating skills.
  • Performance Series Buckets utilize a system-based approach to balance bucket shape against the machine’s linkage, resulting in higher fill factors and better material retention when compared with other buckets of the same rated capacity.
  • Automatic engine idle shutdown system significantly reduces idle time, overall operating hours, and fuel consumption.
  • Dual ride control accumulator system enables a wide payload range and better ride quality.
  • Standard manual front differential provides additional traction when needed. Automatic front and rear locks are available as an option.
  • Optional aggregate handler configuration offers higher payload capability for loose aggregate handling.**
  • With Fusion™ Quick Coupler, buckets can be changed without leaving the cab, allowing the machine to quickly move from task to task.


**Optional configurations and equipment may vary from region to region and require conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.

Smart Machine for Efficient Operation

  • Standard Cat technologies to monitor, manage, and enhance your jobsite operations.
– Cat Payload with Assist provides accurate weighing*** of the bucket payloads. Data is displayed in real time to improve productivity and loading accuracy with manual tip-off.
– Product Link™ wirelessly connects the machine to the office, giving you access to production and essential health information needed to make timely, fact-based decisions to help you better run your business.
– New Autodig allows the operator to fully automate bucket loading to improve fill factors and loading time.
– Auto Set Tires promotes proper loading technique, significantly reducing tire slip and tire wear.
– Onboard Job Aids and Operator Controls Help to ease operation.
  • Optional Cat Advanced Payload with Assist:
– Tip Off Assist automatizes load adjustment of the final bucket to match hauling unit target.
– Enhanced lists management, site integration, and extended scale features to help manage and improve productivity and profitability of operations.
  • Optional Cat Productivity subscription provides detailed and comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

***Not legal for trade.

Proven Reliability

  • Cat C9.3B engine offers high power density with a combination of proven electronics, fuel, and air systems.
  • Equipped with automatic Cat regeneration system, Cat Clean Emissions Module (CEM) with Diesel Particulate Filter (DPF), and Diesel Exhaust Fluid (DEF) tank and pump.
  • Features an electric fuel priming pump, fuel-water separator, and secondary filtration system.
  • Thorough component design and machine validation processes result in unmatched reliability and uptime.

Safety Features

  • Rear-vision camera enhances visibility behind the machine, helping you work safely and confidently.
  • Optional multiview (360˚) vision system helps the operator monitor the surroundings of the machine at all times.
  • Optional Cat Detect radar technology enhances awareness by monitoring the working environment and alerts operators to hazards.
  • Cab access with wide door, remote door opening, and inclined steps add solid stability.
  • Floor-to-ceiling windshield, large mirrors with integrated spot mirrors, and rear-vision camera provide industry leading all-around visibility.
  • Computerized monitoring system includes several warning indicators.
  • Monitored seat belt is standard and can be enhanced with an optional exterior indicator.
  • Optional access light and under-hood service light system to provide illuminated access to the machine and daily checks even in the dark.

Reduced Maintenance Time & Costs

  • Extended fluid and filter change intervals reduce maintenance costs by up to 25%.*
  • Convenient access to hydraulic and electrical service centers for easy ground-level servicing.
  • Remote Troubleshoot can connect the machine to the dealer service department to help diagnose problems quickly so you can get back to work.
  • Remote Flash works around your schedule to ensure your machine’s software is up to date for optimal performance.
  • The Cat App helps you manage fleet location, hours, and maintenance schedules; it also alerts you for required maintenance and allows you to request service from your local Cat dealer.
  • Integrated Autolube extends component and service life.
  • One-piece tilting hood makes engine compartment access fast and easy.

*Parts and fluids only

Durability

  • Heavy-duty axles designed to handle extreme applications.
  • Full-flow hydraulic filtration system with additional kidney-loop filtration improves hydraulic system reliability and component life.

Work in Comfort in the All New Cab

  • Next-generation, easily adjustable seat and suspension for improved operator comfort. It comes in two trim levels and can be equipped with a 4-point harness (kit).
  • Increased legroom and adjustable seat controls for increased comfort and efficiency.
  • Automatic air conditioning system keeps the cab cool as desired.
  • New in-cab dashboard and high-resolution touch display(s) are easy to use, intuitive, and user friendly.
  • Sound suppression, seals, and viscous cab mounts decrease noise and vibration for a quieter work environment.
  • The seat-mounted electro-hydraulic joystick steering system provides precision control and dramatically reduces arm fatigue, resulting in excellent comfort and accuracy.
  • The next generation of ride control works as a shock absorber, improving ride quality over rough terrain.

Purpose-built Specialty Configurations

  • Application-specific arrangements direct from the factory for optimized performance and added durability in the toughest applications, including:
– Industrial and waste models feature guarding and reinforcement necessary for work in transfer stations, recycling depots, scrap yards, and demolition sites.
– Forestry model increases lift and tilt capacities for efficient and productive log and chip handling in paper, pellet, and sawmills.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • Operator Environment
    • Cab, pressurized, sound suppression
    • EH implement controls, parking brake
    • Steering, joystick
    • Seat, cloth, air suspension
    • Touchscreen display
    • Visibility: mirrors, rear-vision camera
    • Air conditioner, heater, defroster (auto temp, fan)
    • Sun visor, front, retractable
    • Sun visor, rear, retractable
    • Window cleaning platform, front
    • Window, front, laminated
  • ON-BOARD TECHNOLOGIES
    • Cat Payload scale
    • Autodig with Auto Set Tires
    • Operator ID & machine security
    • Application Profiles
    • Job Aids
    • Controls Help and eOMM
  • POWER TRAIN
    • Cat C9.3B engine
    • Electric fuel priming pump
    • Fuel-water separator and secondary fuel filter
    • Engine, air precleaner
    • Axles, front differential lock
    • Transmission, planetary, automatic powershift
    • Torque converter with lock-up
    • Service brakes, hydraulic, fully enclosed wet disc, wear indicators
    • Integrated Braking System (IBS)
    • Park brake, caliper on front axles, spring applied-pressure released
  • HYDRAULICS
    • Implement system, load sensing with variable displacement piston pump
    • Steering system, load sensing with dedicated variable displacement piston pump
    • Ride control, dual accumulators
    • Oil sampling valves, Cat XT™ hoses
  • ELECTRICAL
    • Starting and charging system, 24V
    • Starter, electric, heavy duty
    • Lights: halogen, 4 work lights, 2 front roading lights with turn signals, 2 rearvision lights
  • MONITORING SYSTEM
    • Front dash with analog gauges, LCD display, and warning lights
    • Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
  • LINKAGE
    • Standard lift, Z-bar
    • Kickouts: lift and tilt

Optional Equipment

  • Operator Environment
    • Door, remote opening system
    • HMU steering wheel
    • Entertainment radio (FM, AM, USB, BT)
    • Entertainment radio (DAB+)
    • CB radio ready
    • Seat, suede/cloth, air suspension, heated
    • Seat, leather/cloth, air suspension, heated/ cooled
    • Multiview (360�) vision system
    • Cat Detect rear radar system
    • Dedicated rearview screen
    • Mirrors, heated
    • Full cab window guard
  • ON-BOARD TECHNOLOGIES
    • Cat Advanced Payload
    • Cat Payload Printer
  • POWER TRAIN
    • Turbine, air precleaner
    • Radiator, high debris
    • Cooling fan, reversible
    • Axles, auto differential locks front and rear
    • Axles, ecology drains, AOC ready, extreme temperature seals
    • Axles, oil cooler
  • HYDRAULICS
    • 3rd and 4th auxiliary functions with ride control
    • Quick coupler control
  • ELECTRICAL
    • Cold start, 120V or 240V
    • Lights: LED
    • Warning beacon
  • MONITORING SYSTEM
    • Reversing strobe lights
  • LINKAGE
    • High lift, Z-bar
  • ADDITIONAL EQUIPMENT
    • Cat Autolube system
    • Fenders, extensions or roading
    • Guards: power train, crankcase, cab, cylinders, rear
    • Biodegradable hydraulic oil
    • High-speed oil change system
    • Rear cab access
    • Toolbox
    • Wheel chocks
    • Secondary steering system, electrical
  • SPECIAL CONFIGURATIONS
    • Aggregate handler
    • Waste and industrial
    • Forestry
    • Tunnelling
    • Corrosion resistant

Specs

Overview

Long Name:
966 XE
Name:
966 XE
Brand:
Cat
Status:
Current

Engine

Engine Power @ 1,600 rpm - ISO 14396:2002
321 HP / 239 kW
Gross Power @ 1,600 rpm - SAE J1995:2014
325 HP / 242 kW
Engine Model
Cat C9.3B
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
298 HP / 222 kW
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
1226 HP / 1662 N·m

Weights

Operating Weight
51124 lb / 23196 kg
Note
Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, secondary steering, sound suppression, and a 4.2 m³ (5.5 yd³) general purpose bucket with BOCE.

Transmission

Forward - 1
4.3 mile/h / 6.9 km/h
Forward - 2
8 mile/h / 13 km/h
Forward - 3
14.1 mile/h / 22.7 km/h
Forward - 4
24.5 mile/h / 39.5 km/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.
Reverse - 1
4.3 mile/h / 6.9 km/h
Reverse - 2
8 mile/h / 13 km/h
Reverse - 3
17.9 mile/h / 28.8 km/h

Sound

Note (1)
** For machines in European Union countries and in countries that adopt the EU Directives.
Note (2)
***European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
105
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
67 dB(A) / 67 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
107 dB(A) / 107 dB(A)
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
74
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
67 dB(A) / 67 dB(A)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).

Operating Specifications

Breakout Force
38999 lb / 174 kN
Note (1)
For a machine configuration as defined under �Weight.�
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 40° Turn - No Tire Deflection
15981 kg / 35224 lb
Static Tipping Load - Full 40° Turn - With Tire Deflection
32727 lb / 14849 kg

Service Refill Capacities

Cooling System
17.4 gal (US) / 66 l
Crankcase
6.1 gal (US) / 23 l
DEF Tank
6.9 gal (US) / 26 l
Differential - Final Drives - Front
15.1 gal (US) / 57 l
Differential - Final Drives - Rear
15.1 gal (US) / 57 l
Fuel Tank
80.1 gal (US) / 303 l
Hydraulic Tank
30.1 gal (US) / 114 l
Transmission
16.6 gal (US) / 63 l

Hydraulic System

Implement System - Maximum Operating Pressure
4496 psi / 31000 kPa
Implement System - Maximum Pump Output at 2,250 rpm
92 gal/min / 348 l/min

Dimensions

Note
All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires.

Dimensions - High Lift

Centerline of Rear Axle to Edge of Counterweight
8.1 ft / 2458 mm
Centerline of Rear Axle to Hitch
5.1 ft / 1775 mm
Ground Clearance
1.4 ft / 424 mm
Height - Top of Exhaust Pipe
11.8 ft / 3531 mm
Height - Top of Hood
9.5 ft / 2580 mm
Height - Top of ROPS
11.1 ft / 3593 mm
Hinge Pin Height at Carry
2.6 ft / 782 mm
Hinge Pin Height at Maximum Lift
15.9 ft / 4804 mm
Lift Arm Clearance at Maximum Lift
13.8 ft / 4183 mm
Overall Length - Without Bucket
26.6 ft / 8069 mm
Tread Width
7.3 ft / 2230 mm
Wheel Base
11.8 ft / 3550 mm

Dimensions - Standard Lift

Centerline of Rear Axle to Edge of Counterweight
7.7 ft / 2290 mm
Centerline of Rear Axle to Hitch
5.1 ft / 1775 mm
Ground Clearance
424 mm / 1.4 ft
Height - Top of Exhaust Pipe
3531 mm / 11.8 ft
Height - Top of Hood
2580 mm / 9.5 ft
Height - Top of ROPS
3593 mm / 11.1 ft
Hinge Pin Height at Carry
2 ft / 635 mm
Hinge Pin Height at Maximum Lift
4245 mm / 13.11 ft
Lift Arm Clearance at Maximum Lift
3687 mm / 12.1 ft
Overall Length - Without Bucket
7399 mm / 24.4 ft
Tread Width
7.3 ft / 2230 mm
Wheel Base
3550 mm / 11.8 ft

Bucket Capacities

Bucket Range
2.8-11.9 m³ 3.75-15.5 yd³

Engine

Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.

Dimensions - Standard Lift

Width over Tires (Loaded)
9.11 ft / 3012 mm

Dimensions - High Lift

Rack Back at Ground
37 degrees
Width over Tires (Loaded)
9.11 ft / 3012 mm

Dimensions - Standard Lift

Rack Back - Carry Height
50 degrees

Dimensions - High Lift

Rack Back - Maximum Lift
71 degrees

Engine

Gross Torque @ 1,200 rpm – SAE J1995:2014
1327 lb/ft / 1799 N·m
Engine Torque @ 1,200 rpm – ISO 14396:2002
1313 lb/ft / 1781 N·m

Sound

With Cooling Fan Speed at Maximum Value - Note
Distance of 15 m (49.2 ft), moving forward in second gear ratio.

Hydraulic System

Hydraulic Cycle Time - Total
10.1 seconds

Dimensions - High Lift

Rack Back - Carry Height
49 degrees

Dimensions - Standard Lift

Rack Back at Ground
40 degrees
Rack Back - Maximum Lift
62 degrees

Engine

Displacement
9.3 L

SEE HOW 966 XE COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Medium Wheel Loaders
966 XE
966 XE
Brand
Cat
Status
Current
Engine Power @ 1,600 rpm - ISO 14396:2002
321 HP / 239 kW
Gross Power @ 1,600 rpm - SAE J1995:2014
325 HP / 242 kW
Engine Model
Cat C9.3B
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
298 HP / 222 kW
Note (1)
For a machine configuration as defined under �Weight.�
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
1226 HP / 1662 N·m
Note
All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires.
Forward - 1
4.3 mile/h / 6.9 km/h
Forward - 2
8 mile/h / 13 km/h
Forward - 3
14.1 mile/h / 22.7 km/h
Forward - 4
24.5 mile/h / 39.5 km/h
Reverse - 1
4.3 mile/h / 6.9 km/h
Reverse - 2
8 mile/h / 13 km/h
Reverse - 3
17.9 mile/h / 28.8 km/h
Breakout Force
38999 lb / 174 kN
Cooling System
17.4 gal (US) / 66 l
Crankcase
6.1 gal (US) / 23 l
DEF Tank
6.9 gal (US) / 26 l
Differential - Final Drives - Front
15.1 gal (US) / 57 l
Differential - Final Drives - Rear
15.1 gal (US) / 57 l
Fuel Tank
80.1 gal (US) / 303 l
Hydraulic Tank
30.1 gal (US) / 114 l
Transmission
16.6 gal (US) / 63 l
Implement System - Maximum Operating Pressure
4496 psi / 31000 kPa
Centerline of Rear Axle to Edge of Counterweight
7.7 ft / 2290 mm
Centerline of Rear Axle to Hitch
5.1 ft / 1775 mm
Ground Clearance
424 mm / 1.4 ft
Height - Top of Exhaust Pipe
3531 mm / 11.8 ft
Height - Top of Hood
2580 mm / 9.5 ft
Height - Top of ROPS
3593 mm / 11.1 ft
Wheel Base
3550 mm / 11.8 ft
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Rack Back - Maximum Lift
62 degrees
Gross Torque @ 1,200 rpm – SAE J1995:2014
1327 lb/ft / 1799 N·m
Displacement
9.3 L
Medium Wheel Loaders
966 GC
966 GC Medium Wheel Loader
Brand
Caterpillar
Status
Current
Engine Power @ 1,600 rpm - ISO 14396:2002
321 HP / 239 kW
Gross Power @ 1,600 rpm - SAE J1995:2014
325 HP / 242 kW
Engine Model
Cat C9.3B
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
292 HP / 218 kW
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
** For machines in European Union countries and in countries that adopt the “EU Directives”.
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
1234 ft·lbf / 1673 N·m
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32 in) roll radius.
Forward - 1
4 mile/h / 6.4 km/h
Forward - 2
7.5 mile/h / 12.1 km/h
Forward - 3
13 mile/h / 21 km/h
Forward - 4
21.6 mile/h / 34.8 km/h
Reverse - 1
4.3 mile/h / 7 km/h
Reverse - 2
8.2 mile/h / 13.2 km/h
Reverse - 3
14.3 mile/h / 23 km/h
Breakout Force
36974 lbf / 164 kN
Cooling System
14 gal (US) / 53 l
Crankcase
6.1 gal (US) / 23 l
DEF Tank
6.9 gal (US) / 26 l
Differential - Final Drives - Front
15.1 gal (US) / 57 l
Differential - Final Drives - Rear
15.1 gal (US) / 57 l
Fuel Tank
84.5 gal (US) / 320 l
Hydraulic Tank
26.7 gal (US) / 101 l
Transmission
14.5 gal (US) / 55 l
Implement System - Maximum Operating Pressure
4047 psi / 27900 kPa
Centerline of Rear Axle to Edge of Counterweight
8.1 ft / 2453 mm
Centerline of Rear Axle to Hitch
5.82 ft / 1775 mm
Ground Clearance
1.49 ft / 455 mm
Height - Top of Exhaust Pipe
11.61 ft / 3539 mm
Height - Top of Hood
9.2 ft / 2804 mm
Height - Top of ROPS
11.75 ft / 3582 mm
Wheel Base
11.65 ft / 3550 mm
Note (3)
*** European Union Directive “2000/14/EC” as amended by “2005/88/EC”.
Rack Back - Maximum Lift
62 ° / 62 °
Gross Torque @ 1,200 rpm – SAE J1995:2014
1327 ft·lbf / 1799 N·m
Displacement
568 in³ / 9.3 l
Medium Wheel Loaders
972
972
Brand
Cat
Status
Current
Engine Power @ 1,600 rpm - ISO 14396:2002
339 HP / 253 kW
Gross Power @ 1,600 rpm - SAE J1995:2014
342 HP / 256 kW
Engine Model
Cat C9.3B
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
321 HP / 239 kW
Note (1)
For a machine configuration as defined under Weight.
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
1316 ft-lb / 1785 N·m
Note
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Forward - 1
4.1 mile/h / 6.7 km/h
Forward - 2
8.4 mile/h / 13.4 km/h
Forward - 3
15 mile/h / 24.1 km/h
Forward - 4
24.5 mile/h / 39.5 km/h
Reverse - 1
4.5 mile/h / 7.3 km/h
Reverse - 2
9.2 mile/h / 14.8 km/h
Reverse - 3
16.5 mile/h / 26.6 km/h
Breakout Force
44072 lb / 196 kN
Cooling System
17.4 gal (US) / 66 l
Crankcase
6.1 gal (US) / 23 l
DEF Tank
6.9 gal (US) / 26 l
Differential - Final Drives - Front
15.1 gal (US) / 57 l
Differential - Final Drives - Rear
15.1 gal (US) / 57 l
Fuel Tank
80.1 gal (US) / 303 l
Hydraulic Tank
30.1 gal (US) / 114 l
Transmission
15.5 gal (US) / 58.5 l
Implement System - Maximum Operating Pressure
4496 psi / 31000 kPa
Centerline of Rear Axle to Edge of Counterweight
8 ft / 2458 mm
Centerline of Rear Axle to Hitch
5.1 ft / 1775 mm
Ground Clearance
420 mm / 1.4 ft
Height - Top of Exhaust Pipe
3527 mm / 11.7 ft
Height - Top of Hood
2846 mm / 9.4 ft
Height - Top of ROPS
3589 mm / 11 ft
Wheel Base
3550 mm / 11.8 ft
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Rack Back - Maximum Lift
56 degrees
Gross Torque @ 1,200 rpm – SAE J1995:2014
1388 lb/ft / 1882 N·m
Displacement
9.3 L