H110 S
H110 S Hydraulic Hammer
DESCRIPTION
Paired with your Cat excavator, the H110 S hammer is the ideal choice for quarries and demolition jobs, or in general construction where a breaker is needed for ground excavation.Work ToolsIncrease Production
<ul><li>Hammer hits with consistent power, delivering constant production.</li><li>Operation cycle is more efficient – less waste in internal heat, more power delivered to the tool.</li><li>Piston and tool are matched in diameter and mass, greatly increasing efficiency in power transmission.</li><li>Blow frequency, hydraulic pressure and impact energy have been tuned to produce the highest possible work rates on Cat machines.</li></ul>
Lower Maintance Costs
<li>No need for constant checking of the gas charge.</li> Design keeps gas pressure steady through the duration of the annual service interval.</li>
<li>All daily checks and routine service can be performed with the hammer attached to the machine.</li><li>Spend more time working and less time on service.</li> Greasing can be performed quickly from one standing-height grease point.</li><li>Service the lower bushing in the field using simple hand tools.</li>
<li>Lower bushing is rotatable – more service life lower parts cost.</li>
<li>Optional on-board autolube provides continual greasing as the hammer runs, protecting your investment.</li><li>Available for extreme environments, the optional wear package protects the hammer housing from damage.</li></ul>
Easy to Operate
<li>Auto shut off prevents blank firing, the leading cause of user-induced damage to hammers.</li><li>On a Next Gen Cat Excavator, hammers are protected by Auto-Stop, preventing damage from over-hammering in a single spot.</li><li>This feature helps prevent damage to your machine and premature damage to your hammer, even with inexperienced operators
<li>Performance Hammers lead in both operator comfort and machine protection.</li> The buffering system qualitatively dampens vibration to the machine due to proprietary buffering material.</li> <li>Can be configured for joystick or foot pedal control to suit your operating preference.</li></ul>
Next Level Technology
<ul><li>All models include Product Link technology standard, you can locate the hammer via the Cat App on your phone.</li><li>When paired with a Next Gen Cat excavator, the hammer is automatically recognized and configured
<li>Cat hammer dimensions are included in Cat E-Fence technology – protects the cab, and keeps the hammer in safe areas on the job site.</li><li>Hammer pressure and flow controls can be monitored and configured via the in-cab monitor – manually or automatically.</li></ul>
- Specs
- Docs
Specs
Overview
SEE HOW H110 S COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Caterpillar
- Status
- Current
- Impact Energy Class
- 2000 ft·lbf / 2712 J
- Blows per Minute
- 450-1000
- Minimum Operating Weight
- 2095 lb / 950 kg
- Maximum Operating Weight
- 2381 lb / 1080 kg
- Minimum Rated Flow
- 16 gal/min / 60 l/min
- Maximum Rated Flow
- 32 gal/min / 120 l/min
- Minimum Operating Pressure
- 2176 psi / 15000 kPa
- Maximum Operating Pressure
- 2321 psi / 16000 kPa
- Tool Shaft Diameter
- 3.92 in / 99.5 mm
- Minimum Carrier Weight
- 24300 lb / 11 t
- Maximum Carrier Weight
- 39700 lb / 18 t
- Brand
- Caterpillar
- Status
- Current
- Impact Energy Class
- 3500 ft·lbf / 4745 J
- Blows per Minute
- 350-620
- Minimum Operating Weight
- 3263 lb / 1480 kg
- Maximum Operating Weight
- 4101 lb / 1860 kg
- Minimum Rated Flow
- 26 gal/min / 100 l/min
- Maximum Rated Flow
- 45 gal/min / 170 l/min
- Minimum Operating Pressure
- 2031 psi / 14000 kPa
- Maximum Operating Pressure
- 2176 psi / 15000 kPa
- Tool Shaft Diameter
- 4.7 in / 119.5 mm
- Minimum Carrier Weight
- 35300 lb / 16012 kg
- Maximum Carrier Weight
- 59500 lb / 26989 kg
- Brand
- Caterpillar
- Status
- Current
- Impact Energy Class
- 3000 ft·lbf / 4067 J
- Blows per Minute
- 370-800
- Minimum Operating Weight
- 2359 lb / 1070 kg
- Maximum Operating Weight
- 3219 lb / 1460 kg
- Minimum Rated Flow
- 18 gal/min / 70 l/min
- Maximum Rated Flow
- 34 gal/min / 130 l/min
- Minimum Operating Pressure
- 2176 psi / 15000 kPa
- Maximum Operating Pressure
- 2321 psi / 16000 kPa
- Tool Shaft Diameter
- 4.31 in / 109.5 mm
- Minimum Carrier Weight
- 26500 lb / 12 t
- Maximum Carrier Weight
- 44100 lb / 20 t