MH-0070-0M10

MH-0070-0M10

DESCRIPTION

MH-0070-0M10Cat Rental

Features

  • Comfortable Operating Station

    The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.

  • Fingertip Control

    The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.

  • LCD Display

    The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.

  • Convenient Console

    The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.

  • Temperature Sensors

    Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

  • Pass-Count Mapping

    Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

  • Temperature Mapping

    Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

  • Split Drum Design

    The exclusive split-drum design delivers excellent mat quality in urban environments when frequent turning is required. When turning, the outside drum half rotates faster than the inside drum, eliminating the potential for shoving and tearing that occurs on standard vibratory drum designs. The exclusive axle-type pod design utilizes tapered roller bearings that support each drum half and eliminates any potential for contact between the two halves.

  • Performance Features

    The vibratory systems offer multiple options that help fine-tune performance on thick challenging lifts. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.

  • Dual Amplitude/Dual Frequency Vibratory System

    The dual amplitude, dual frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.

  • Cat® C3.4B Engine

    The C3.4B engine provides 75 kW (102 hp) of power and meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).

  • High Capacity Cooling System

    The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. The high capacity fans direct warm air away from the operator for a more comfortable operating environment.

SEE HOW MH-0070-0M10 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Forced Air Heaters
MH-0070-0M10
MH-0070-0M10
Brand
Mi-T-M
Status
Current
Input Rating
70000 BTU
Fuel Consumption
.53 gal/hr
Weight
28 lb / 12.7 kg
Length
30 in / 762 mm
Width
12 in / 304.8 mm
Height
15 in / 381 mm
Forced Air Heaters
MH-0050-LM10
MH-0050-LM10
Brand
Mi-T-M
Status
Current
Input Rating
50000 BTU
Fuel Consumption
2.3 lbs/hr
Weight
15 lb / 6.8 kg
Length
18.1 in / 459.7 mm
Width
7.7 in / 195.6 mm
Height
12.8 in / 325.1 mm
Forced Air Heaters
MH-0080-CM10
MH-0080-CM10
Brand
Mi-T-M
Status
Current
Input Rating
60/70/80000 BTU
Fuel Consumption
2.3/2.8/3.7 lbs/hr
Weight
12 lb / 5.4 kg
Length
15.7 in / 398.8 mm
Width
15.7 in / 398.8 mm
Height
21.8 in / 553.7 mm