MP324 Pulverizer Jaw

MP324 Pulverizer Jaw

MP324 with Pulverizer Jaw

DESCRIPTION

Cat® Multi-Processors accept multiple interchangeable jaws for a wide range of demolition tasks. Faster cycle times get your jobs done quicker. Greater power means taking on bigger jobs. Quick jaw change gives you the right tool for the task at hand, without slowing you down. All built on a durable, easy to maintain platform.

Cycle Times are 50 Percent Faster

  • New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
  • You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
  • Maximum crushing/cutting force is applied as soon as the jaw contacts material.

Up to 19 Percent More Force

  • Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
  • Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
  • Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.

Change Jaws in 15 minutes

  • Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
  • Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
  • MP324 accepts these jaw types:
    • Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
    • Demolition – opens wide to crack the largest concrete structures
    • Pulverizer – crushes concrete, separating the rebar
    • Secondary Pulverizer – crushes concrete into finer particles; total rebar separation
    • Shear – cuts structural steel, pipe, and cable
    • Tank Shear – cuts at right angle on three sides, cleanly cutting tanks or plate steel
    • Universal – innovative design cuts steel and crushes concrete

Durable and Maintainable

  • Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
  • Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
  • Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.

  • Specs
  • Docs

Specs

Overview

Long Name:
MP324 Pulverizer Jaw
Name:
MP324 Pulverizer Jaw
Brand:
Caterpillar
Status:
Current

Performance

Cycle Time - Open
1.8 s / 1.8 s
Cycle Time - Close
1.2 s / 1.2 s
Crushing Force - Primary Cutter
419 Sh Ton / 3727 kN
Crushing Force - Cutter Tip
187 Sh Ton / 1664 kN
Crushing Force - Tooth Tip
124 Sh Ton / 1104 kN

Hydraulic Requirements

Jaw Circuit - Max. Oil Pressure
5076 psi / 350 bar
Jaw Circuit - Max. Oil Flow
59 gal/min / 225 l/min
Rotation Circuit - Max. Oil Pressure
2031 psi / 140 bar
Rotation Circuit - Max. Oil Flow
11 gal/min / 40 l/min

Dimensions - Jaw

Jaw Depth
30.1 in / 764 mm
Cutter Length
7.9 in / 200 mm
Jaw Opening - Maximum
38 in / 965 mm
Jaw Width - Fixed
20.4 in / 519 mm
Jaw Width - Moveable
13.3 in / 337 mm

Dimensions - Housing + Jaw

Length
85.9 in / 2183 mm
Height
57.7 in / 1466 mm
Width
31.2 in / 793 mm

Weight

Weight - Housing, Jaw and Bracket
6263 lb / 2841 kg
Weight - Jaw Only
2637 lb / 1196 kg

Recommended Carrier Weight

Excavator Minimum
24 tons
Excavator Maximum
35 tons

SEE HOW MP324 Pulverizer Jaw COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Multi-Processor with Pulverizer Jaws
MP324 Pulverizer Jaw
MP324 with Pulverizer Jaw
Brand
Caterpillar
Status
Current
Cycle Time - Open
1.8 s / 1.8 s
Cycle Time - Close
1.2 s / 1.2 s
Crushing Force - Primary Cutter
419 Sh Ton / 3727 kN
Crushing Force - Cutter Tip
187 Sh Ton / 1664 kN
Crushing Force - Tooth Tip
124 Sh Ton / 1104 kN
Jaw Circuit - Max. Oil Pressure
5076 psi / 350 bar
Jaw Circuit - Max. Oil Flow
59 gal/min / 225 l/min
Rotation Circuit - Max. Oil Pressure
2031 psi / 140 bar
Rotation Circuit - Max. Oil Flow
11 gal/min / 40 l/min
Jaw Depth
30.1 in / 764 mm
Cutter Length
7.9 in / 200 mm
Jaw Opening - Maximum
38 in / 965 mm
Jaw Width - Fixed
20.4 in / 519 mm
Jaw Width - Moveable
13.3 in / 337 mm
Length
85.9 in / 2183 mm
Height
57.7 in / 1466 mm
Width
31.2 in / 793 mm
Weight - Housing, Jaw and Bracket
6263 lb / 2841 kg
Weight - Jaw Only
2637 lb / 1196 kg
Excavator Minimum
24 tons
Excavator Maximum
35 tons
Multi-Processor with Pulverizer Jaws
MP318 Pulverizer Jaw
MP318 with Pulverizer Jaw
Brand
Caterpillar
Status
Current
Cycle Time - Open
1.6 s / 1.6 s
Cycle Time - Close
1 s / 1 s
Crushing Force - Primary Cutter
289 Sh Ton / 2570 kN
Crushing Force - Cutter Tip
127 Sh Ton / 1131 kN
Crushing Force - Tooth Tip
88 Sh Ton / 781 kN
Jaw Circuit - Max. Oil Pressure
5076 psi / 350 bar
Jaw Circuit - Max. Oil Flow
40 gal/min / 150 l/min
Rotation Circuit - Max. Oil Pressure
2031 psi / 140 bar
Rotation Circuit - Max. Oil Flow
11 gal/min / 40 l/min
Jaw Depth
26.2 in / 666 mm
Cutter Length
7.9 in / 200 mm
Jaw Opening - Maximum
32.4 in / 824 mm
Jaw Width - Fixed
18.9 in / 480 mm
Jaw Width - Moveable
11.8 in / 300 mm
Length
79 in / 2006 mm
Height
51.5 in / 1307 mm
Width
31.2 in / 793 mm
Weight - Housing, Jaw and Bracket
4592 lb / 2083 kg
Weight - Jaw Only
1922 lb / 872 kg
Excavator Minimum
18 tons
Excavator Maximum
25 tons
Multi-Processor with Pulverizer Jaws
MP332 Pulverizer Jaw
MP332 with Pulverizer Jaw
Brand
Caterpillar
Status
Current
Cycle Time - Open
1.9 s / 1.9 s
Cycle Time - Close
1.3 s / 1.3 s
Crushing Force - Primary Cutter
556 Sh Ton / 4947 kN
Crushing Force - Cutter Tip
221 Sh Ton / 1962 kN
Crushing Force - Tooth Tip
162 Sh Ton / 1439 kN
Jaw Circuit - Max. Oil Pressure
5076 psi / 350 bar
Jaw Circuit - Max. Oil Flow
74 gal/min / 280 l/min
Rotation Circuit - Max. Oil Pressure
2321 psi / 160 bar
Rotation Circuit - Max. Oil Flow
11 gal/min / 40 l/min
Jaw Depth
33.1 in / 840 mm
Cutter Length
7.9 in / 200 mm
Jaw Opening - Maximum
41.8 in / 1062 mm
Jaw Width - Fixed
19.7 in / 500 mm
Jaw Width - Moveable
12.3 in / 313 mm
Length
89.6 in / 2277 mm
Height
74 in / 1879 mm
Width
39.6 in / 1005 mm
Weight - Housing, Jaw and Bracket
7419 lb / 3365 kg
Weight - Jaw Only
3294 lb / 1494 kg
Excavator Minimum
32 tons
Excavator Maximum
50 tons