PC406 With Water

PC406 With Water High Flow XHP Cold Planer

Studio Shot

DESCRIPTION

High speed drum and conical bits quickly remove asphalt and concrete prior to resurfacing.Cat® Cold Planers are designed for small paving jobs in residential and commercial applications and are primarily used to economically restore asphalt and concrete surfaces. They are ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited. The Cat Cold Planers are designed for use on Cat Skid Steer Loaders, Compact Track Loaders, Compact Wheel Loaders and Backhoe Loaders.

Application

Designed for small paving jobs in residential and commercial applications, and are primarily used to economically restore asphalt and concrete surfaces. Ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited.

Self-leveling Design

Self-leveling design automatically levels itself when placed on the ground for consistent depth control without operator adjustments and excellent spoil retention.

Two Wear-Resistant Skid Plates

Two wear-resistant skid plates remain parallel to the ground for optimum stability.

Hydraulic Side shift

Hydraulic side shift permits close planing to curbs, walls and other obstructions.

Independent Left/Right Depth Control

Independent left/right depth control allows maximum drum depths to be adjusted independently on each skid. Gauges are easily viewable from the cab. Independent depth control is mechanical on the PC104 and PC105 models; hydraulic independent depth control is standard on the PC305-PC412 models.

Max Pro Pressure Gauge

Max Pro Pressure Gauge provides operator feedback to adjust speed for maximum productivity in changing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Standard on all models.

Direct Drive System

Direct drive system on the standard flow models features a variable speed, uni-directional, gerotor style hydraulic motor. Direct drive system on high flow and XHP models features a hydraulic radial piston motor to ensure maximum cutting rate and drum torque for optimal production performance and efficiency.

Float, Spring Tilt and Hydraulic Tilt

Float enables planers to follow the contour of the surface. Float is activated by a knob and is only available on high flow and XHP planers. Spring tilt and hydraulic tilt enable planers to oscillate for angled cuts. Tilt is hydraulically controlled on high flow models and spring controlled on standard flow planers.

Bits Options

All purpose conical bits are standard. Optional concrete bits, heavy duty concrete bits, and heavy duty asphalt bits are also available. Tools to change out the bits are included.

Cut Mark

Indicates contact point of drum with surface based on depth of cut, so an assistant can communicate with the operator when to start and stop the cut.

Drum Center Indicator

Indicates center of the drum on the side of the planer.

Fast Cut Asphalt Drums Standard

Fast cut asphalt drums require less power for cutting due to increased spacing between cutting lines on the drum. These drums improve productivity in asphalt applications, and are now standard on all models. Multi-purpose and optional-width drums are also available.

Serrated Steps

Serrated steps allow for safe and easy access in and out of the cab. A new center step enables even easier access and shorter step lengths by the operator.

OMM Container

Stores the OMM (Operation and Maintenance Manual) in a protective case on the attachment, where it can be conveniently accessed.

Optional Integrated Water Tank

Coupler frame-mounted water tank provides 160 liters (42 gallons) capacity with a tank level sight gauge. Can be combined with cab-mounted water tank for additional capacity and run time. Sprinkler kit included if cold planer is ordered with a water tank installed. Water tank not available on XD models.

  • Specs
  • Docs

Specs

Overview

Long Name:
PC406 With Water High Flow XHP Cold Planer
Name:
PC406 With Water
Brand:
Cat
Status:
Current
Working Width
23.6 in / 600 mm
Maximum Cutting Depth
6.7 in / 170 mm
Required Hydraulics
XHP / XE
Overall Width
73.1 in / 1858 mm
Overall Length
57.2 in / 1453 mm
Overall Height
37.4 in / 951 mm
Weight
2753.6 lb / 1249 kg
Optimal Hydraulic Flow
136-150 L/min (36-40 gpm)
Optimal Hydraulic Pressure
250-280 bar (3630-4000 psi)
Drum Speed
133 rpm
Tilt Angle Range +/-
6.5 degrees
Side Shift Travel
25.6 in / 650 mm
Conical Bits
54
Standard Bit Type
All Purpose
Water Tank Capacity
42.3 gal (US) / 160 l

SEE HOW PC406 With Water COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Cold Planers
PC406 With Water
Studio Shot
Brand
Cat
Status
Current
Working Width
23.6 in / 600 mm
Required Hydraulics
XHP / XE
Overall Width
73.1 in / 1858 mm
Overall Length
57.2 in / 1453 mm
Overall Height
37.4 in / 951 mm
Weight
2753.6 lb / 1249 kg
Optimal Hydraulic Flow
136-150 L/min (36-40 gpm)
Optimal Hydraulic Pressure
250-280 bar (3630-4000 psi)
Drum Speed
133 rpm
Tilt Angle Range +/-
6.5 degrees
Side Shift Travel
25.6 in / 650 mm
Conical Bits
54
Standard Bit Type
All Purpose
Cold Planers
PC406
Studio Shot
Brand
Cat
Status
Current
Working Width
23.6 in / 600 mm
Required Hydraulics
XHP / XE
Overall Width
73.1 in / 1858 mm
Overall Length
50 in / 1270 mm
Overall Height
37.4 in / 951 mm
Weight
2176 lb / 987 kg
Optimal Hydraulic Flow
136-150 L/min (36-40 gpm)
Optimal Hydraulic Pressure
250-280 bar (3630-4000 psi)
Drum Speed
133 rpm
Tilt Angle Range +/-
6.5 degrees
Side Shift Travel
25.6 in / 650 mm
Conical Bits
54
Standard Bit Type
All Purpose
Cold Planers
PC408
Studio Shot
Brand
Cat
Status
Current
Working Width
29.5 in / 750 mm
Required Hydraulics
XHP / XE
Overall Width
73.1 in / 1858 mm
Overall Length
50 in / 1270 mm
Overall Height
37.4 in / 951 mm
Weight
2303.8 lb / 1045 kg
Optimal Hydraulic Flow
136-150 L/min (36-40 gpm)
Optimal Hydraulic Pressure
250-280 bar (3630-4000 psi)
Drum Speed
133 rpm
Tilt Angle Range +/-
6.5 degrees
Side Shift Travel
25.6 in / 650 mm
Conical Bits
60
Standard Bit Type
All Purpose