S-50 Pin Grabber LCS 10 Ton Mini Excavators

S-50 Pin Grabber S Type Coupler With Secure Lock For 10 Ton Mini Excavators

Studio Shot

DESCRIPTION

The S Type Coupler is a pin grabber style dedicated coupler. It ensures an exchangeability of tools within a fleet of machines with different platforms. Consistent tight fit to attachment, low offset, and reliability are the key features.Cat® S Type Couplers for Mini Excavators are an optimal design for a dedicated quick coupler solution. Low offset, pin grabber ability, and a wedge type locking system ensures a tight fit, no attachment play during use. It also creates the solution to exchange work tools among different platforms and brands. In combination with the Tilt Rotate System that can be equipped with an S Type Coupler and the variety of different buckets offered, it provides a complete attachment solution for Mini Excavators. The coupler is designed with the highest safety standards and comes with a visible locking mechanism.

Hydraulic Cylinder Lock

Hydraulic cylinder with check, relief and pressure control valve included. Locking Control System (LCS) incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation Mini Hydraulic Excavator machine's (ECM) by way of an electrical harness.

Locking Indicator

The visual verification rod allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.

Lifting Hook

Integrated lifting hook allows the operator to switch tasks to lifting without changing tools or coupler.

Low Profile/Build Height

Low build height quick coupler with minimal offset results in minimal break out force reduction.

Protected Components

All components integrated inside the coupler housing and protected against contaminants and potential force impact.

Wedge Type Locking Mechanism

Wedge type locking mechanism minimizes impact loading into the hydraulic cylinder.

Locking Control System

Locking Control System (LCS) incorporates cylinder positioning sensing and provides electrical feedback to the machine which requires Cat® software to display locking system status.

  • Specs

Specs

Overview

Long Name:
S-50 Pin Grabber S Type Coupler With Secure Lock For 10 Ton Mini Excavators
Name:
S-50 Pin Grabber LCS 10 Ton Mini Excavators
Brand:
Cat
Status:
Current
Weight
215 lb / 97.5 kg
Lifting Hook Capacity
6613.9 lb / 3000 kg
Width
13.9 in / 353 mm
Overall Length
27.1 in / 689 mm
Overall Height
13 in / 330 mm
Pin Diameter
2.4 in / 60 mm
Machine Class
10 Ton Mini Excavators
Interface Type
Pin On
Required Hydraulics
Dedicated Factory Installed
Maximum Operating Pressure
5076.3 psi / 350 bar
Coupler Type
S-50 Pin Grabber

SEE HOW S-50 Pin Grabber LCS 10 Ton Mini Excavators COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

S Type Couplers
S-50 Pin Grabber LCS 10 Ton Mini Excavators
Studio Shot
Brand
Cat
Status
Current
Weight
215 lb / 97.5 kg
Lifting Hook Capacity
6613.9 lb / 3000 kg
Width
13.9 in / 353 mm
Overall Length
27.1 in / 689 mm
Overall Height
13 in / 330 mm
Pin Diameter
2.4 in / 60 mm
Machine Class
10 Ton Mini Excavators
Interface Type
Pin On
Required Hydraulics
Dedicated Factory Installed
Maximum Operating Pressure
5076.3 psi / 350 bar
Coupler Type
S-50 Pin Grabber
S Type Couplers
S-50 Pin Grabber 8 Ton Mini Excavators
Studio Shot
Brand
Cat
Status
Current
Weight
196.9 lb / 89.3 kg
Lifting Hook Capacity
6613.9 lb / 3000 kg
Width
13.5 in / 342.5 mm
Overall Length
24.8 in / 630 mm
Overall Height
12.5 in / 318 mm
Pin Diameter
2 in / 50 mm
Machine Class
8 Ton Mini Excavators
Interface Type
Pin On
Required Hydraulics
Dedicated Factory Installed
Maximum Operating Pressure
5076.3 psi / 350 bar
Coupler Type
S-50 Pin Grabber
S Type Couplers
S-50 Pin Grabber LCS 8 Ton Mini Excavators
Studio Shot
Brand
Cat
Status
Current
Weight
196.9 lb / 89.3 kg
Lifting Hook Capacity
6613.9 lb / 3000 kg
Width
13.5 in / 343 mm
Overall Length
24.8 in / 630 mm
Overall Height
12.5 in / 318 mm
Pin Diameter
2 in / 50 mm
Machine Class
8 Ton Mini Excavators
Interface Type
Pin On
Required Hydraulics
Dedicated Factory Installed
Maximum Operating Pressure
5076.3 psi / 350 bar
Coupler Type
S-50 Pin Grabber