1524 mm (60 in)

1524 mm (60 in) Multi V-Plow

Studio Shot

DESCRIPTION

Two independently operating blades that can hydraulically angle into five different blade configurations to move snow with maximum efficiency and power.Cat® Multi V-Plows Buckets for Cat Skid Steer Loaders, Compact Track Loaders and Compact Wheel Loaders are a versatile attachment for snow removal applications with the capability to hydraulically angle 5 different blade configurations. Push, plow, sweep, or scoop snow and ice to clear surfaces and restore safe passage to driveways, sidewalks, parking lots, and roadways.

Curved Moldboard

Curved moldboard design rolls and folds the snow while windrowing, minimizing snow clinging to its surface and spilling over the top.

Adjustable Skid Plates

Adjustable skid plates reduce the chances of gouging plowed surface and allow for improved operator control and maintains a constant cutting edge depth.

Blade Float

Blade float allows the plow the ability to pivot up to five degrees about the plow frame allowing the blade to follow surface contours and plow more efficiently.

Adjustable Trip Edges

Adjustable trip edges are incorporated into the base of each wing. Sectioned off moldboard springs back upon contact with unseen obstacles minimizing risk of damage to the v-plow and machine.

Bolt-On Serrated Step

Bolt-On serrated step provides safe and ergonomic access to machine cab that is replaceable if damaged.

V (scoop mode) Blade Configuration

V (scoop mode) blade configuration pushes, collects, piles high or holds snow for removal to another area for final clean up.

V (plow mode) Blade Configuration

V (plow mode) blade configuration quickly cuts initial pathway through deep, hard packed snow piles and drifts.

Right/Left Angled Blade Configuration

Right/Left angled blade configuration quickly and easily windrows snow to the designated side of the machine.

Straight Blade Configuration

Straight blade configuration provides maximum width for piling and stacking snow high and clearing light snow cove.

  • Specs
  • Docs

Specs

Overview

Long Name:
1524 mm (60 in) Multi V-Plow
Name:
1524 mm (60 in)
Brand:
Caterpillar
Status:
Current
Straight Width
60 in / 1524 mm
Angled Width
53 in / 1346 mm
Interface Type
Skid Steer Coupler
V-Width - Scoop Mode
54 in / 1372 mm
V-Width - Plow Mode
58.4 in / 1483 mm
Weight
639.3 lb / 290 kg
Blade Height
29 in / 737 mm
Overall Height
32.5 in / 826 mm
Length
52 in / 1320 mm
Hydraulic Angling - Left/Right of Center
±35 Degrees
Float
±5 Degrees
Optimal Hydraulic Flow
57-76 lpm (15-20 gpm)
Optimal Hydraulic Pressure
150-230 bar (2176-3340 psi)
Trip Edge Quantity
2
Trip Edge Type
Steel
Trip Edge Height
4 in / 101 mm
Trip Edge Pivot Height
3.3 in / 83 mm
Required Hydraulics
Standard Flow

SEE HOW 1524 mm (60 in) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Multi V-Plows
1524 mm (60 in)
Studio Shot
Brand
Caterpillar
Status
Current
Straight Width
60 in / 1524 mm
Angled Width
53 in / 1346 mm
Interface Type
Skid Steer Coupler
V-Width - Scoop Mode
54 in / 1372 mm
V-Width - Plow Mode
58.4 in / 1483 mm
Weight
639.3 lb / 290 kg
Blade Height
29 in / 737 mm
Overall Height
32.5 in / 826 mm
Length
52 in / 1320 mm
Hydraulic Angling - Left/Right of Center
±35 Degrees
Float
±5 Degrees
Optimal Hydraulic Flow
57-76 lpm (15-20 gpm)
Optimal Hydraulic Pressure
150-230 bar (2176-3340 psi)
Trip Edge Quantity
2
Trip Edge Type
Steel
Trip Edge Height
4 in / 101 mm
Trip Edge Pivot Height
3.3 in / 83 mm
Required Hydraulics
Standard Flow
Multi V-Plows
2134 mm (84 in)
Studio Shot
Brand
Caterpillar
Status
Current
Straight Width
84 in / 2134 mm
Angled Width
73 in / 1854 mm
Interface Type
Skid Steer Coupler
V-Width - Scoop Mode
72.7 in / 1847 mm
V-Width - Plow Mode
78 in / 1982 mm
Weight
939.2 lb / 426 kg
Blade Height
29 in / 737 mm
Overall Height
32.5 in / 826 mm
Length
52 in / 1320 mm
Hydraulic Angling - Left/Right of Center
±35 Degrees
Float
±5 Degrees
Optimal Hydraulic Flow
57-76 lpm (15-20 gpm)
Optimal Hydraulic Pressure
150-230 bar (2176-3340 psi)
Trip Edge Quantity
2
Trip Edge Type
Steel
Trip Edge Height
4 in / 101 mm
Trip Edge Pivot Height
3.3 in / 83 mm
Required Hydraulics
Standard Flow