773G
773G Off-Highway Truck
DESCRIPTION
Caterpillar is pleased to introduce to you the 773G Off-Highway Truck. You may be asking how, after 40 years of building trucks, Caterpillar has improved this product’s ability to support your business.G Series has been designed and manufactured using the latest quality control technologies – virtual and hands on. This product has over 30,000 hours of proven performance in the hands of customers prior to production, all of which ensures the truck delivered to your yard is ready to work, reliably and dependably.
In addition to quality, Cat G Series trucks will lower your costs with seven different ways to help you conserve fuel. We offer you two customizable fuel economy modes that will let you choose your level of savings. With Cat G Series trucks in your haul fleet, you can be more productive, spend less time on maintenance, and support the environment with new levels of eco performance. Your crew will appreciate all the new comfort and conveniences in our updated cab. Simply put, Cat G Series trucks can and will make a positive difference to both your business and people – all day, every day.The G Series represents a new era for Cat’s Off-Highway Trucks and the 773G provides our customers with a quality operating environment that enhances productivity and provides significant savings in fuel consumption, too. Ergonomically designed with an operator’s comfort in mind, the 773G has an updated cab with new comforts as well as controls conveniently placed within reach of the operator’s hands. Built with a Cat C27 diesel engine, this 60-ton payload uses increased torque delivering 5% additional horsepower. An ideal pass match for the 773G Off-Highway Truck is Cat’s 988K Wheel Loader, 990K Wheel Loader, or the 390F Hydraulic Excavator. Simply put, the 773G will make a positive difference in haul performance all day, every day for today and tomorrow’s work.
ACHIEVE GREATER PRODUCTIVITY
- Haul your materials faster with a 5% accelerated travel speed.
- Put more power to the ground with a 15% increase in torque.
- Enjoy greater productivity while using a more responsive Traction
Control System (TCS). - Reduce tire wear with maximum by engaging TCS early in the slip.
- Strong, predictable performance helps operators achieve the lowest cost per ton.
DESIGNED FOR SAFETY
- Improvements in accessibility with safe, ground-level access tofuel fill and daily maintenance points.
- Ensure three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
- Ground-level refueling requires no climbing on the machine to fill the fuel tank.
- The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
WORK IN COMFORT
- Completely redesigned cab for a whole new standard in visibility,comfort, and productivity.
- The new operator seat placement provides easier operation and comfort to the operator.
- Improvements in enlarged views of the work area andits surroundings.
- Access connectivity and decrease clutter with more storage areas in the new designed cab.
- Enjoy the easy, automotive-quality shifting with the new transmission controls.
- Automatic cab temperature controls.
TECHNOLOGY THAT GETS WORK DONE
- Integrated systems give you the ability to make timely, fact-based
decisions to maximize efficiency, improve productivity, and lower
costs. - Gain valuable insight into how your machine is performing by
continuously monitoring and collecting vital machine data via the
advisor display with the Vital Information Management System
(VIMS™) software. - Truck Production Management System (TPMS) provides accurate weighing of the materials, stores 2,400 payload cycles, and reportson, haul cycle times, and distances with date and time stamps.
- External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
- Product Link™ system connects to each machine wirelessly,
allowing you to monitor location, hours, fuel use, productivity, idle
time, and diagnostic codes. - VisionLink®
wirelessly connects you to your equipment, giving
you access to essential information you need to know to run your business. - The Cat 773G is MineStar™ ready and includes Cat Product Link
Elite and VIMS to help optimize equipment management, remote
monitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic
failure.
REDUCED MAINTENANCE COST AND OTHER COSTS
- Grouped service points.
- Control particulate matter with two engine-mounted diesel oxidation catalyst canisters.
- NRS technology replaces a portion of intake air with exhaust gas to control combustion temperatures and NOx production.
- Parts commonality with other Cat equipment.
- Resolve problems before failure occurs with VIMS notifications.
- Autostall enables quick operating temperatures for best performance life.
- Prevents hot shutdowns that can reduce component life with the use of delayed engine shutdown.
- Hydraulic oil filter life is extended to 1,000 hours under normal operating conditions.
APPLICATION VERSATILITY
- Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
- For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
- The X body’s flat floor is perfect for metering material, especially when feeding the crusher.
- Protect your truck’s body life in high-impact, hard rock applications with the optional rubber liner—available for Dual Slope and X bodies.
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWER TRAIN
- Cat C27 Tier 4/Stage V compliant diesel engine:
– Air cleaner with precleaner (2)
– Air-To-Air Aftercooler (ATAAC)
– Electric start
– Engine idle shutdown
– Ether starting aid
– Exhaust muffler
– NGMR radiator
For Tier 4 regions only (U.S./Canada):
– Aftertreatment system- NOx Reduction System (NRS)
- Diesel Oxidation Catalyst (DOC)
– Demand fan
– MEUI-C fuel system - Braking system:
– Extended Life Brakes
– Automatic Retarder Control (ARC)
– Manual retarder (utilizes rear oil-cooled, multiple disc brakes)
– Brake release motor (towing)
– Dry disc brakes (front)
– Front brake disconnect switch (front)
– Oil-cooled multiple disc brakes (rear)
– Brake wear indicator (rear)
– Parking brake
– Secondary brake
– Service brake - Transmission:
– 7-speed automatic powershift with:- Electronic Clutch Pressure Control (ECPC)
- Advanced Productivity Electronic Control Strategy (APECS)
– Automatic neutral idle
– Autostall
– Second gear start
- Cat C27 Tier 4/Stage V compliant diesel engine:
- SUSPENSION SYSTEMS
- Suspension, front and rear
- ELECTRICAL
- Alarm backup
- Alternator, 120 Amp
- Autolube power supply ready
- Batteries, maintenance-free, 12V (2), 1,400 CCA combined
- Electrical system, 25 Amp, 24V to 12V converter
- Lighting system:
– Backup light (halogen)
– Directional signals/hazard warning (front and rear LED)
– Engine compartment light
– Headlights, (halogen) with dimmer
– Operator access courtesy lights
– Side profile lights
– Stop/tail lights (LED) - Service center containing:
– Battery jump start
– Breakers with spare fuses
– Lockout switch
– Ports, ET and VIMS
– Service lockout switch (power without engine start)
- TECHNOLOGY PRODUCTS
- Economy Modes, standard and adaptive
- Product Link, cellular or satellite
- Traction Control System (TCS)
- Truck Production Management System
- Vital Information Management System (VIMS)
- OPERATOR ENVIRONMENT
- Advisor display:
– Air cleaner service indicator
– Fluid level monitoring
– Fuel level monitoring
– Display languages (market-based) - Air conditioning/heat
- Automatic temperature control
- Ashtray and cigarette lighter
- Coat hook
- Cup holders (4)
- Diagnostic connection port, 24V
- Entertainment radio ready:
– 5 amp converter
– Speakers
– Antenna
– Wiring harness - Foot rest
- Gauges/indicators:
– Brake oil temperature gauge
– Coolant temperature gauge
– Engine overspeed indicator
– Fuel level
– Hour meter
– Speedometer with odometer
– Tachometer
– Transmission gear indicator - Hoist lever
- Horn
- Light – courtesy
- Light – dome
- Mirrors, non-heated
- Power port, 24V and 12V (2)
- Rollover Protection (ROPS)/Falling Object Protection (FOPS)
- Seat, Cat Comfort Series III:
– Full air suspension
– Retractable 3-point seat belt with shoulder harness - Seat, training with lap belt
- Steering wheel, padded, tilt and telescopic
- Storage compartment
- Sun visor
- Throttle lock
- Window, hinged, right side (emergency exit)
- Window, powered, left side
- Windshield wiper intermittent and washer
- Advisor display:
- GUARDS
- Driveline
- Engine crankcase
- Fan
- FLUIDS
- Antifreeze
- Extended life coolant to –34° C (–30° F)
- Grouped ground-level filters
- OTHER STANDARD EQUIPMENT
- Body down indicator
- Body safety pin (secures body in up position)
- Center-mounted rims
- Fuel tank, 795 L (210 gal)
- Ground level battery disconnect
- Ground level engine shutdown
- Ground level grease fittings
- Operator Maintenance Manual (OMM)
- Rims 17 × 35
- Rock ejectors
- Secondary steering (electric)
- Tie down eyes
- Tow hooks (front)/tow pin (rear)
- Vandalism protection locks
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- OPTIONAL EQUIPMENT
- Body heat
- Body liner
- Body sideboards
- Cab precleaner
- Cat Engine Brake
- Clustered grease fittings
- Cold weather packages
- Fluid fill service center
- HID lights
- Mirrors, convex
- Mirrors, heated
- Spare rim
- Visibility package (meets ISO 5006 requirements)
- Wheel chocks
- Work Area Vision System (WAVS)
Specs
Overview
Long Name:
773G Off-Highway Truck
Name:
773G
Brand:
Caterpillar
Status:
Current
Engine
Engine Model
Cat® C27
Rated Engine Speed
1800 r/min / 1800 r/min
Gross Power - SAE J1995
775 HP / 578 kW
Net Power - SAE J1349
719 HP / 536 kW
Net Power - ISO 9249
762 HP / 568 kW
Net Power - 80/1269/EEC
762 HP / 568 kW
Bore
5.4 in / 137 mm
Stroke
6 in / 152 mm
Displacement
1648 in³ / 27 l
Note (1)
Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.
Engine Power - ISO 14396
764 HP / 570 kW
Peak Torque - Speed
1200 r/min / 1200 r/min
Net Torque
3148 ft-lb / 4269 N·m
Note (3)
No engine derating required up to 3048 m (10,000 ft) for Tier 4/Stage V.
Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Weights - Approximate
Maximum Gross Vehicle Weight
226501 lb / 102739 kg
Operating Specifications
Nominal Payload Class (100%)
61 ton (US) / 55.3 t
Top Speed - Loaded
41.6 mile/h / 66.9 km/h
Note (2)
* Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
Maximum Working Payload (110%)
67.1 ton (US) / 60.8 t
Note (1)
Capacity with Dual Slope body – no liner.
Body Capacity - SAE 2:1
46.8 yd³ / 35.8 m³
Target Payload (100%)
61 ton (US) / 55.3 t
Transmission
Forward - 1
6.6 mile/h / 10.6 km/h
Forward - 2
9.3 mile/h / 15 km/h
Forward - 3
12.6 mile/h / 20.3 km/h
Forward - 4
16.8 mile/h / 27 km/h
Forward - 5
22.8 mile/h / 36.7 km/h
Forward - 6
30.7 mile/h / 49.4 km/h
Forward - 7
41.6 mile/h / 66.9 km/h
Reverse
8.7 mile/h / 14 km/h
Note
Maximum travel speeds with standard 24.00R35 (E4) tires.
Final Drives
Differential Ratio
3.64:1
Planetary Ratio
4.80:1
Total Reduction Ratio
17.49:1
Brakes
Brake Surface - Front
257 in² / 655 cm²
Brake Surface - Rear
9497 in² / 61269 cm²
Brake Standards
ISO 3450:2011
Body Hoists
Pump Flow - High Idle
118 gal/min / 448 l/min
Relief Valve Setting - Raise
2502 psi / 17250 kPa
Relief Valve Setting - Lower
500 psi / 3450 kPa
Body Raise Time - High Idle
10 s / 10 s
Body Lower Time - Float
14 s / 14 s
Body Power Down - High Idle
14 s / 14 s
Capacity - Dual Slope - 100% Fill Factor
Struck
35.13 yd³ / 26.86 m³
Heaped (SAE 2:1)*
46.76 yd³ / 35.75 m³
Note (2)
* ISO 6483:1980.
Note (1)
Contact your local Cat dealer for body recommendation.
Capacity - Flat Floor - 100% Fill Factor
Struck
34.33 yd³ / 26.25 m³
Note (2)
* ISO 6483:1980.
Heaped (SAE 2:1)*
46.41 yd³ / 35.49 m³
Note (1)
Contact your local Cat dealer for body recommendation.
Weight Distributions - Approximate
Front Axle - Empty
53 % / 53 %
Front Axle - Loaded
35 % / 35 %
Rear Axle - Empty
47 % / 47 %
Rear Axle - Loaded
65 % / 65 %
Suspension
Rear axle - Oscillation
8.1 ° / 8.1 °
Empty Loaded Cylinder Stroke Rear
5.8 in / 149 mm
Empty Loaded Cylinder Stroke Front
9.2 in / 234 mm
Service Refill Capacities
Fuel Tank
210 gal (US) / 795 l
Cooling System
45 gal (US) / 171 l
Differential - Final Drives
38 gal (US) / 145 l
Steering Tank
9.5 gal (US) / 36 l
Steering System - Including Tank
14 gal (US) / 54 l
Torque Converter - Transmission System - HRC
18 gal (US) / 70 l
Crankcase
24 gal (US) / 90 l
Brake Hoist System
85 gal (US) / 322 l
Brake/Hoist Hydraulic Tank
46.5 gal (US) / 176 l
Tires
Note (1)
Productive capabilities of the 773G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2)
Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Standard Tire
24.00R35 (E4)
ROPS
FOPS Standards
Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
ROPS Standards
Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
Sound
Sound Standards (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Standards (2)
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).
Sound Standards (1)
The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Steering
Turning Diameter - Front
77.1 ft / 23.5 m
Steering Standards
SAE J1511 FEB94 ISO 5010:1992
Steer Angle
31 ° / 31 °
Turning Circle - Clearance Diameter
85.6 ft / 26.1 m
Operating Specifications
Maximum Allowable Payload (120%)*
73.2 ton (US) / 66.4 t
SEE HOW 773G COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Off-Highway Trucks
773G
- Brand
- Caterpillar
- Status
- Current
- Engine Model
- Cat® C27
- Rated Engine Speed
- 1800 r/min / 1800 r/min
- Gross Power - SAE J1995
- 775 HP / 578 kW
- Net Power - SAE J1349
- 719 HP / 536 kW
- Net Power - ISO 9249
- 762 HP / 568 kW
- Bore
- 5.4 in / 137 mm
- Stroke
- 6 in / 152 mm
- Displacement
- 1648 in³ / 27 l
- Engine Power - ISO 14396
- 764 HP / 570 kW
- Nominal Payload Class (100%)
- 61 ton (US) / 55.3 t
- Top Speed - Loaded
- 41.6 mile/h / 66.9 km/h
- Body Capacity - SAE 2:1
- 46.8 yd³ / 35.8 m³
- Forward - 1
- 6.6 mile/h / 10.6 km/h
- Forward - 2
- 9.3 mile/h / 15 km/h
- Forward - 3
- 12.6 mile/h / 20.3 km/h
- Forward - 4
- 16.8 mile/h / 27 km/h
- Forward - 5
- 22.8 mile/h / 36.7 km/h
- Forward - 6
- 30.7 mile/h / 49.4 km/h
- Forward - 7
- 41.6 mile/h / 66.9 km/h
- Reverse
- 8.7 mile/h / 14 km/h
- Differential Ratio
- 3.64:1
- Planetary Ratio
- 4.80:1
- Total Reduction Ratio
- 17.49:1
- Brake Surface - Front
- 257 in² / 655 cm²
- Brake Surface - Rear
- 9497 in² / 61269 cm²
- Brake Standards
- ISO 3450:2011
- Pump Flow - High Idle
- 118 gal/min / 448 l/min
- Relief Valve Setting - Raise
- 2502 psi / 17250 kPa
- Relief Valve Setting - Lower
- 500 psi / 3450 kPa
- Body Raise Time - High Idle
- 10 s / 10 s
- Body Lower Time - Float
- 14 s / 14 s
- Body Power Down - High Idle
- 14 s / 14 s
- Struck
- 34.33 yd³ / 26.25 m³
- Front Axle - Empty
- 53 % / 53 %
- Front Axle - Loaded
- 35 % / 35 %
- Rear Axle - Empty
- 47 % / 47 %
- Rear Axle - Loaded
- 65 % / 65 %
- Rear axle - Oscillation
- 8.1 ° / 8.1 °
- Empty Loaded Cylinder Stroke Rear
- 5.8 in / 149 mm
- Empty Loaded Cylinder Stroke Front
- 9.2 in / 234 mm
- Fuel Tank
- 210 gal (US) / 795 l
- Cooling System
- 45 gal (US) / 171 l
- Differential - Final Drives
- 38 gal (US) / 145 l
- Steering Tank
- 9.5 gal (US) / 36 l
- Steering System - Including Tank
- 14 gal (US) / 54 l
- Crankcase
- 24 gal (US) / 90 l
- Brake Hoist System
- 85 gal (US) / 322 l
- Brake/Hoist Hydraulic Tank
- 46.5 gal (US) / 176 l
- Standard Tire
- 24.00R35 (E4)
- FOPS Standards
- Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
- ROPS Standards
- Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
- Sound Standards (3)
- Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
- Sound Standards (2)
- The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).
- Sound Standards (1)
- The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
- Turning Diameter - Front
- 77.1 ft / 23.5 m
- Steering Standards
- SAE J1511 FEB94 ISO 5010:1992
- Steer Angle
- 31 ° / 31 °
- Turning Circle - Clearance Diameter
- 85.6 ft / 26.1 m
Selected Model
Off-Highway Trucks
772G
- Brand
- Caterpillar
- Status
- Current
- Engine Model
- Cat® C18
- Rated Engine Speed
- 1700 r/min / 1700 r/min
- Gross Power - SAE J1995
- 605 HP / 451 kW
- Net Power - SAE J1349
- 550 HP / 410 kW
- Net Power - ISO 9249
- 550 HP / 410 kW
- Bore
- 5.7 in / 145 mm
- Stroke
- 7.2 in / 183 mm
- Displacement
- 1105 in³ / 18.1 l
- Engine Power - ISO 14396
- 598 HP / 446 kW
- Nominal Payload Class (100%)
- 51.6 ton (US) / 46.8 t
- Top Speed - Loaded
- 49.2 mile/h / 79.2 km/h
- Body Capacity - SAE 2:1
- 40.8 yd³ / 31.2 m³
- Forward - 1
- 8 mile/h / 12.9 km/h
- Forward - 2
- 10.9 mile/h / 17.5 km/h
- Forward - 3
- 14.8 mile/h / 23.8 km/h
- Forward - 4
- 19.8 mile/h / 31.9 km/h
- Forward - 5
- 26.9 mile/h / 43.3 km/h
- Forward - 6
- 36.2 mile/h / 58.3 km/h
- Forward - 7
- 49.2 mile/h / 79.2 km/h
- Reverse
- 10.4 mile/h / 16.7 km/h
- Differential Ratio
- 2.74:1
- Planetary Ratio
- 4.80:1
- Total Reduction Ratio
- 13.14:1
- Brake Surface - Front
- 216 in² / 1395 cm²
- Brake Surface - Rear
- 7794 in² / 50281 cm²
- Brake Standards
- ISO 3450:1996
- Pump Flow - High Idle
- 118 gal/min / 448 l/min
- Relief Valve Setting - Raise
- 2750 psi / 18950 kPa
- Relief Valve Setting - Lower
- 500 psi / 3450 kPa
- Body Raise Time - High Idle
- 7.5 s / 7.5 s
- Body Lower Time - Float
- 10 s / 10 s
- Body Power Down - High Idle
- 10 s / 10 s
- Struck
- 31.3 yd³ / 23.9 m³
- Front Axle - Empty
- 51.4 % / 51.4 %
- Front Axle - Loaded
- 34.2 % / 34.2 %
- Rear Axle - Empty
- 48.6 % / 48.6 %
- Rear Axle - Loaded
- 65.8 % / 65.8 %
- Rear axle - Oscillation
- 8.9 ° / 8.9 °
- Empty Loaded Cylinder Stroke Rear
- 5.8 in / 149 mm
- Empty Loaded Cylinder Stroke Front
- 9.2 in / 234 mm
- Fuel Tank
- 140 gal (US) / 530 l
- Cooling System
- 33 gal (US) / 125 l
- Differential - Final Drives
- 47 gal (US) / 180 l
- Steering Tank
- 14.5 gal (US) / 55 l
- Steering System - Including Tank
- 23 gal (US) / 87 l
- Crankcase
- 17 gal (US) / 64 l
- Brake Hoist System
- 60 gal (US) / 227 l
- Brake/Hoist Hydraulic Tank
- 38 gal (US) / 145 l
- Standard Tire
- 21.00R33 (E4)
- FOPS Standards
- FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.
- ROPS Standards
- ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
- Sound Standards (3)
- Operator Equivalent Sound Pressure Level (Leq) is 74 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
- Sound Standards (2)
- Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 115 dB(A).
- Sound Standards (1)
- Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
- Turning Diameter - Front
- 57.7 ft / 17.6 m
- Steering Standards
- ISO 5010:2007
- Steer Angle
- 31 ° / 31 °
- Turning Circle - Clearance Diameter
- 66.6 ft / 20.3 m
Off-Highway Trucks
775
- Brand
- Caterpillar
- Status
- Current
- Engine Model
- Cat® C27
- Rated Engine Speed
- 1800 r/min / 1800 r/min
- Gross Power - SAE J1995
- 825 HP / 615 kW
- Net Power - SAE J1349
- 768 HP / 572 kW
- Net Power - ISO 9249
- 775 HP / 578 kW
- Bore
- 5.4 in / 137 mm
- Stroke
- 6 in / 152 mm
- Displacement
- 1648 in³ / 27 l
- Engine Power - ISO 14396
- 812 HP / 605.2 kW
- Nominal Payload Class (100%)
- 70.5 ton (US) / 64 t
- Top Speed - Loaded
- 41.6 mile/h / 66.9 km/h
- Body Capacity - SAE 2:1
- 55.23 yd³ / 42.23 m³
- Forward - 1
- 6.6 mile/h / 10.6 km/h
- Forward - 2
- 9.3 mile/h / 15 km/h
- Forward - 3
- 12.6 mile/h / 20.3 km/h
- Forward - 4
- 16.8 mile/h / 27 km/h
- Forward - 5
- 22.8 mile/h / 36.7 km/h
- Forward - 6
- 30.7 mile/h / 49.4 km/h
- Forward - 7
- 41.6 mile/h / 66.9 km/h
- Reverse
- 8.7 mile/h / 14 km/h
- Differential Ratio
- 3.64:1
- Planetary Ratio
- 4.80:1
- Total Reduction Ratio
- 17.49:1
- Brake Surface - Front
- 257 in² / 655 cm²
- Brake Surface - Rear
- 9497 in² / 61269 cm²
- Brake Standards
- ISO 3450:2011
- Pump Flow - High Idle
- 118 gal/min / 448 l/min
- Relief Valve Setting - Raise
- 2502 psi / 17250 kPa
- Relief Valve Setting - Lower
- 500 psi / 3450 kPa
- Body Raise Time - High Idle
- 10 s / 10 s
- Body Lower Time - Float
- 14 s / 14 s
- Body Power Down - High Idle
- 14 s / 14 s
- Struck
- 42.2 yd³ / 32.3 m³
- Front Axle - Empty
- 50 % / 50 %
- Front Axle - Loaded
- 34 % / 34 %
- Rear Axle - Empty
- 50 % / 50 %
- Rear Axle - Loaded
- 66 % / 66 %
- Rear axle - Oscillation
- 8.1°
- Empty Loaded Cylinder Stroke Rear
- 5.8 in / 149 mm
- Empty Loaded Cylinder Stroke Front
- 9.2 in / 234 mm
- Fuel Tank
- 210 gal (US) / 795 l
- Cooling System
- 45 gal (US) / 171 l
- Differential - Final Drives
- 38 gal (US) / 145 l
- Steering Tank
- 9.5 gal (US) / 36 l
- Steering System - Including Tank
- 14 gal (US) / 54 l
- Crankcase
- 24 gal (US) / 90 l
- Brake Hoist System
- 85 gal (US) / 322 l
- Brake/Hoist Hydraulic Tank
- 46.5 gal (US) / 176 l
- Standard Tire
- 24.00R35 (E4)
- FOPS Standards
- Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
- ROPS Standards
- Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
- Sound Standards (3)
- Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
- Sound Standards (2)
- The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).
- Sound Standards (1)
- The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
- Turning Diameter - Front
- 77.1 ft / 23.5 m
- Steering Standards
- ISO 5010:2007
- Steer Angle
- 31 ° / 31 °
- Turning Circle - Clearance Diameter
- 85.6 ft / 26.1 m