C15 ACERT™

C15 ACERT Tier 4 Interim / EU Stage IIIB

C15 ACERT™ Tier 4 I Engine

DESCRIPTION

Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Interim or EU Stage IIIB emissions certifications in land mechanical drilling applications such as mud pump drives. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat C15 ACERT Diesel Engine. Ratings: 354-433 bkW (475-580 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 4 Interim, EU Stage IIIB emission standards.Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Interim or EU Stage IIIB emissions certifications in land mechanical drilling applications such as mud pump drives. Cat C15 ACERT™ Industrial Diesel Engine. Ratings: 354-433 bkW (475-580 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 4 Interim, EU Stage IIIB emission standards.Oil and Gas

Emissions

- Designed to meet 2011 U.S. EPA Tier 4 Interim and EU Stage IIIB emissions requirements. - On-engine NOx reduction system with optimized piston, ring, liner, and fuel system configuration to reduce NOx while minimizing in-cylinder sooting- Aftertreatment features Clean Emissions Module, including: diesel oxidation catalyst, diesel particulate filter- Future Tier 4 Final technology solution designed to fit into current standard aftertreatment envelope, eliminating the need to redesign your installation

Engine Design

- Proven reliability and durability of engine and aftertreatment- Broad operating speed range- High power density- PTO drive options provide flexible access to auxiliary power for pumps and other needs

Low Total Cost of Ownership

- Optimized fuel consumption- Minimum 5000-hour diesel particulate filter ash service interval and 250- to 500-hour oil change intervals enable low maintenance costs

Advanced Digital Engine Management

ADEM A4 control system providing integrated ignition, speed governing, protection, and controls, including detonationsensitive variable ignition timing. ADEM A4 has improved: user interface, display system, shutdown controls, and system diagnostics.

Power Units

Engine available with factory packaged features including:- Aftertreatment- Base- Radiator- Transmission

Custom Packaging

For any petroleum application, trust Caterpillar to meet your exact needs with a factory custom package. Cat® engines, generators, enclosures, controls, radiators, transmissions, aftertreatment solutions — anything your project requires — can be custom designed and matched to create a one-of-a kind solution. Custom packages are globally supported and are covered by a one-year warranty after startup.

Fuel & Oil

Requires Ultra Low Sulfur Diesel (ULSD) containing a maximum of 15 ppm sulfur, and new oil formulations to support the new technology. Designed to accommodate B20 biofuel.

Optional Attachments

- Engine-Mounted Transmission Oil Cooler — integration with engine cooling system allows ease of installation and a tighter overall engine package- Engine Brakes — braking capabilities for mobile applications

Transmissions

- Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface.- C15 ACERT™ Cat optimized transmission matches: TH35-E81, CX31-P600, CX35-P800

Product Support Offered Through Global Cat Dealer Network

- More than 2,200 dealer outlets- Cat factory-trained dealer technicians service every aspect of your petroleum engine- Cat parts and labor warrantyPreventive maintenance agreements available for repair-beforefailure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engine

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • Air Inlet System
    • Turbocharged Air-to-Air Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
  • Exhaust System
    • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
  • Flywheels and Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, shallow)
  • Power Take Off
    • SAE A, SAE B, SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes

Optional Equipment

Specs

Overview

Long Name:
C15 ACERT Tier 4 Interim / EU Stage IIIB
Name:
C15 ACERT™
Brand:
Caterpillar
Status:
Current

Engine Specifications

Maximum Rating
580 BHP / 433 bkW
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB
Displacement
928 in³ / 15.2 l
Minimum Rating
475 BHP / 354 bkW
Bore
5.4 in / 137 mm
Stroke
6.7 in / 171 mm
Rated Speed
2100 r/min / 1800 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A4
Engine Weight - Net Dry
2976 lb / 1350 kg
Oil Change Interval
250 - 500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 1
Flywheel Teeth
113

Capacity for Liquids

Minimum Cooling System - Engine Only
5 gal (US) / 18.7 l

Dimensions

Length
47.4 in / 1203 mm
Width
36.7 in / 933 mm
Height
46.7 in / 1186 mm

SEE HOW C15 ACERT™ COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Land Drilling Engines and Generator Sets
C15 ACERT™
C15 ACERT™ Tier 4 I Engine
Brand
Caterpillar
Status
Current
Maximum Rating
580 BHP / 433 bkW
Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB
Displacement
928 in³ / 15.2 l
Minimum Rating
475 BHP / 354 bkW
Bore
5.4 in / 137 mm
Stroke
6.7 in / 171 mm
Rated Speed
2100 r/min / 1800 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A4
Engine Weight - Net Dry
2976 lb / 1350 kg
Oil Change Interval
250 - 500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 1
Flywheel Teeth
113
Minimum Cooling System - Engine Only
5 gal (US) / 18.7 l
Length
47.4 in / 1203 mm
Width
36.7 in / 933 mm
Height
46.7 in / 1186 mm
Land Drilling Engines and Generator Sets
3516
3516 Land Drilling Engines
Brand
Caterpillar
Status
Current
Maximum Rating
1649 BHP / 1230 bkW
Emissions
Non-certified
Displacement
4210 in³ / 69 l
Minimum Rating
1649 BHP / 1230 bkW
Bore
6.69 in / 170 mm
Stroke
7.48 in / 190 mm
Rated Speed
1200 r/min / 1200 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
W3161
Engine Weight - Net Dry
19090 lb / 8659 kg
Oil Change Interval
500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
183
Minimum Cooling System - Engine Only
61.5 gal (US) / 233 l
Length
128 in / 3251 mm
Width
67 in / 1701 mm
Height
78.9 in / 2004 mm
Land Drilling Engines and Generator Sets
C15 ACERT™
C15 ACERT Land Drilling Engines
Brand
Caterpillar
Status
Current
Maximum Rating
595 BHP / 444 bkW
Emissions
EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Displacement
928 in³ / 15.2 l
Minimum Rating
440 BHP / 328 bkW
Bore
5.4 in / 137.2 mm
Stroke
6.75 in / 171 mm
Rated Speed
2100 r/min / 1800 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A3
Engine Weight - Net Dry
2743 lb / 1245 kg
Oil Change Interval
250
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)
Minimum Cooling System - Engine Only
5.5 gal (US) / 20.8 l
Length
54.2 in / 1377 mm
Width
36.5 in / 927 mm
Height
48.3 in / 1227 mm