PMC-V
PMC-V Human Machine Interface for PMC-D Drive Control Systems
DESCRIPTION
In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation.Complete Cat Longwall Systems
Cat Longwall Automation: Improving Safety, Productivity and Efficiency Underground
Cat Longwall Automation
- Human machine interface for configuration and customization of the PMC-D/V family
- Diagnostic features for whole system
- Process visualization
- Change of parameters
- Communication link to other systems
- Additional sensor inputs
- Specs
- Docs
Specs
Overview
Long Name:
PMC-V Human Machine Interface for PMC-D Drive Control Systems
Name:
PMC-V
Brand:
Caterpillar
Status:
Current
Components
Operating System
µITRON RTOS
Processor
32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
RAM Memory
4Mbytes CMOS Static RAM, 4Mbytes Flash
Dimensions (Approximate)
Width
9.49 in / 241 mm
Height
5.83 in / 148 mm
Length
13.19 in / 335 mm
Main Technical Data
Components (2)
IP 68
Components (4)
12 SKK24 sockets for power supply, communication, sensors and actuators
Components (3)
Optional additional Profibus communication channel for communication with third party computer
Components (1)
320 × 240 pixel b/w graphics display
Components (5)
Power: 12 W
Global Certifications
Types (3)
More certifications on demand
Types (4)
Australia: IECEx, ANZEx
Types (6)
Russia: GOST
Types (2)
U.S.: MSHA
Types (1)
Europe: ATEX
Types (5)
China: MA
Electrical Data
Supply Voltage - Typical Value
12 V DC
Supply Current - Typical Value
1 A / 1 A
Supply Current - Maximum Ratings
1.5 A / 1.5 A
Supply Voltage - Maximum Ratings
9.5 V - 13.2 V
Environmental Data
Temperature - Typical Value
68 °F / 20 °C
Temperature - Symbol
Tamb
Temperature - Maximum Ratings
-20° C - +40° C (-4° F - +104° F)
Electrical Sockets
Socket 8 - Pin 1
+12 V (B)
Socket 11 - Pin 1
Options
Socket 2 - Pin 3
Serial Interface: TxD
Socket 10 - Pin 2
Measurement Input 3
Socket 8 - Pin 2
Measurement Input 1
Socket 7 - Pin 4
GND Input
Socket 5 - Pin 3
Options
Socket 5 - Pin 2
Options
Socket 6 - Pin 2
Profibus: a (internal)
Socket 10 - Pin 1
+12 V (A)
Socket 2 - Pin 2
Serial Interface: RxD
Socket 12 - Pin 2
Profibus: a (internal)
Socket 12 - Pin 3
Profibus: b (internal)
Socket 7 - Pin 2
Serial Interface: TxD
Socket 5 - Pin 1
Options
Socket 10 - Pin 4
GND
Socket 1 - Pin 4
Optocoupler Kathode
Socket 3 - Pin 3
Serial Interface: TxD
Socket 3 - Pin 2
Serial Interface: RxD
Socket 7 - Pin 3
Serial Interface: RxD
Socket 8 - Pin 4
GND
Socket 9 - Pin 3
+8.2 V
Socket 4 - Pin 2
Serial Interface: RxD
Socket 6 - Pin 3
Profibus: b (internal)
Socket 4 - Pin 3
Serial Interface: TxD
Socket 7 - Pin 1
+12 V Input
Socket 4 - Pin 1
+12 V (C)
Socket 9 - Pin 4
GND
Socket 3 - Pin 4
GND
Socket 3 - Pin 1
+12 V (B)
Socket 4 - Pin 4
GND
Socket 11 - Pin 3
Options
Socket 9 - Pin 2
Measurement Input 2
Socket 2 - Pin 4
GND
Socket 1 - Pin 1
Optocoupler Anode
Socket 11 - Pin 4
Options
Socket 1 - Pin 2
Relay Contact NO: a
Socket 5 - Pin 4
Options
Socket 8 - Pin 3
+8.2 V
Socket 1 - Pin 3
Relay Contact NO: b
Socket 10 - Pin 3
+8.2 V
Socket 11 - Pin 2
Options
Socket 9 - Pin 1
+12 V (C)
Socket 2 - Pin 1
+12 V (A)
Options (Designations of options equal the second and third to last characters of type designation listed on equipment)
Socket 5 - Pin 3 (1)
AB (Profibus: b [external])
Socket 11 - Pin 1 (1)
AB
Socket 5 - Pin 3 (2)
**
Socket 11 - Pin 4 (2)
AB
Socket 5 - Pin 4 (2)
**
Socket 11 - Pin 2 (2)
**
Socket 5 - Pin 2 (1)
AB (Profibus: a [external])
Socket 11 - Pin 4 (1)
**
Socket 5 - Pin 1 (2)
**
Socket 11 - Pin 1 (2)
**
Socket 5 - Pin 2 (2)
**
Socket 11 - Pin 3 (1)
AB (Profibus: b [external])
Socket 11 - Pin 2 (1)
AB (Profibus: a [external])
Socket 5 - Pin 4 (1)
AB
Socket 5 - Pin 1 (1)
AB
Socket 11 - Pin 3 (2)
**