SE60 V Vibratory Screed

SE60 V Screed

SE60 V Screed


The SE60 V Vibratory Screed is equipped with rear-mounted extenders and fast heating screed plates, making it a perfect fit for parking areas, business developments, and other applications that require variable width paving. The low profile design enables good visibility for efficient operation. It has a paving range of 3.0 m to 7.65 m (9' 10" - 25').

Fast Heating

The 70 kW, tractor integrated generator combined with the technologically advanced screed heating system, ensures fast, even heat distribution. The 15 minute heating time at standard widths can lead to more daily production and lower fuel consumption due to less time waiting for the screed plates to reach the preset temperature. At maximum widths screed plate heating occurs in as little as 25 minutes.

Exclusive Monitoring

The exclusive generator system monitors heating elements for failure conditions in order to help plan for scheduled service events. Furthermore, temperature zone monitoring allows heating to continue in the event of a sensor failure and warning indicators are delivered through the LCD displays.

More Control

The extenders are equipped with 2 speed ranges and proportional control for better performance around obstacles. Pendant controls located on the extenders enable operators to perform functions remotely. The conveyor ratio adjustment can be made from the screed control panel when utilizing the 2-sensor feeder system in order to maintain optimal material height in front of the screed.

Integrated Cat Grade Control

Factory integrated Cat Grade Control allows the crew to operate from either of the tractor or screed consoles. A split screen mode enables the screed operators to work from a single side or from each side of the screed. This is especially helpful when training new operators and when the crew is tasked with multiple job site duties.

Simple Adjustment

Power controls for crown, slope, and height allow for on-the-go adjustment at standard and maximum widths. The exclusive trailing edge screed plate adjusters as well as machined screed frames help optimize plate life and simplify leveling procedures.

Easy Service, Increased Durability

Water resistant consoles and LCD displays ensure performance in adverse conditions and the million-cycle keypad switches and oil-bath vibratory pods provide longterm reliability. The heating elements slide out for easy replacement. An innovative design simplifies extension additions when setting up for wider width paving. A single person can easily accomplish this task without the use of additional lifting devices.

  • Specs
  • Docs



Long Name:
SE60 V Screed
SE60 V Vibratory Screed


Standard Weight
7495 lb / 3400 kg

Operating Specifications

Standard Paving Range
3.0 - 6.0 m (9' 10" - 19' 6"')
Maximum Paving Width
25 ft / 7.65 m
Maximum Paving Depth
12 in / 305 mm
Extender Height Range
-20 mm to +50 mm
Crown Range
-4% to +10%
Vibratory Speed Range
0 - 3000 rpm


Transport Width - Endgates Folded
9.85 in / 3000 mm
Transport Length - Tractor and Screed
22.6 ft / 6910 mm
Screed Plate Width - Front to Back
16 in / 407 mm

Operating Specifications

Extender Slope Range
-3% to +10%


Length - Front to Back, Endgates Attached
94 in / 2394 mm

Operating Specifications

Heating Time - Maximum Width
25 minutes


Length - Front to Back, Endgates Removed
68 in / 1730 mm

Operating Specifications

Heating Time - Standard Width
15 minutes