TRS4

TRS4 Tiltrotator

Studio Shot

DESCRIPTION

Cat® Tiltrotators help you maneuver obstacles in your work area without the need for repositioning your machine.Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to more easily reach along ditch edges.

Complete 360 Degree Rotation

Provides optimal control of your work tools to provide greater flexibility.

Integrated Central Lubrication System

A single point of entry for grease allows the entire unit to be greased quickly and easily.

Optional Grapple Module

Used to pick up objects such as pipe and debris.

Oil Filled Gearbox

A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.

Heavy Duty Worm Gear

Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.

Double Acting Cylinder with Load Hold Valve

Valves sustain holding pressures and prevent cylinder movement under load constraints.

Visual Verification Indicator

The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.

Locking Control System (LCS)

LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.

Compatibility Note

Only compatible with the following Next Gen machines and serial numbers:

  • 303 - S/N MY3 1 & Up
  • 303.5 - S/N CE9 1 & Up
  • 304 - S/N AN4 1 & Up

  • Specs
  • Docs

Specs

Overview

Long Name:
TRS4 Tiltrotator
Name:
TRS4
Brand:
Cat
Status:
Current
Machine Class
3-4 Ton Mini Excavator
Weight
253.5 lb / 115 kg
Interface Options: Top-Bottom
S40 / S40
Overall Height
27.6 in / 702 mm
Length
17.7 in / 449 mm
Overall Width
15.9 in / 404 mm
Rotation Speed
7 Seconds per 1 full rotation
Tilt Angle Range +/-
40° Left/Right
Maximum Bucket Width
39.4 in / 1000 mm
Optimal Hydraulic Flow
17-25 L/min (4.5-6.7 gpm)
Maximum Operating Pressure
3045.8 psi / 21000 kPa
Required Hydraulics
1st Auxiliary
Tilting Torque
4277.9 lb/ft / 5800 N·m
Turning Torque
1253.9 lb/ft / 1700 N·m