NEW | 2022 CAT 299D3
LISTING DETAILS
Model
299D3
Product Family
COMPACT TRACK LOADERS
Manufacturer
CAT
Year
2022
Serial Number
0CY900505
Location
SAN DIEGO, RANCHO BERNARDO
Unit Number
H17837
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- ELECTRICAL
- 12 volt Electrical System
- 100 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 850 CCA
- OPERATOR ENVIRONMENT
- Gauges: Fuel Level, DEF Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Air Inlet Heater Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System
- Adjustable Vinyl Seat
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) Throttle, Electronic
- Adjustable Joystick Controls
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control
- Storage Compartment with Netting
- POWER TRAIN
- Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released, Wet Multi Disc Parking Brakes
- Hydrostatic Transmission, Two Speed Travel
- Suspension – Independent Torsion Axles (4)
- OTHER
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –37° C (–34° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link™ PL240, Cellular
- MANDATORY EQUIPMENT
- Hydraulics, Standard or High Flow XPS
- Quick Coupler, Mechanical or Powered
- High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- Steel Imbed Rubber Track – 400 mm (15.7 in) or 450 mm (17.7 in)
- Dual Flange Front Idler/Single Flange Rear Idler or Triple Flange Front/Rear Idlers
- PERFORMANCE PACKAGE (must select one of the following):
– Performance Package H1: Standard Flow (No Self Level)
– Performance Package H2: Standard Flow, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow XPS, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) - COMFORT PACKAGE (must select one of the following):
– Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
– Enclosed ROPS with A/C (C3): C2 + Air Conditioner
Optional Equipment
- OPTIONAL EQUIPMENT
- External Counterweights
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Paint, Custom
- Heavy Duty Battery, 850 CCA, with Battery Disconnect
- Heavy Duty Battery, 1,000 CCA, with Battery Disconnect
- Product Link PL641, Cellular
- Variable Speed Demand Fan with Reversing Functionality
- Speed Sensitive Ride Control
- Work Tool Return to Dig and Work Tool Positioner
- Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
Specs
Overview
Long Name:
299D3 Compact Track Loader
Name:
299D3
Brand:
Caterpillar
Status:
Current
Engine
Gross Power - SAE J1995
98 HP / 73 kW
Operating Specifications
Rated Operating Capacities - 35% Tipping Load
3480 lb / 1580 kg
Weights
Operating Weight
11464 lb / 5200 kg
Dimensions
Length - Track on Ground
69.6 in / 1767 mm
Overall Length - Track
89.4 in / 2270 mm
Height - Top of Cab
83.6 in / 2125 mm
Ground Clearance
9.6 in / 245 mm
Departure Angle
33°
Maximum Dump Angle
54°
Vehicle Width (450 mm/17.7 in tracks)
78 in / 1981 mm
Turning Radius from Center - Coupler
58.1 in / 1476 mm
Rack Back Angle - Maximum Height
81°
Reach - Maximum Lift/Dump
33.6 in / 852 mm
Vehicle Width (400 mm/15.7 in tracks)
76 in / 1931 mm
Bucket Pin Reach - Maximum Lift
19.4 in / 493 mm
Bucket Pin Height - Carry Position
7.1 in / 180 mm
Turning Radius from Center - Bucket (racked)
91.1 in / 2314 mm
Maximum Reach - With Arms Parallel to Ground
51.9 in / 1319 mm
Length - Without Bucket
125.5 in / 3189 mm
Length - With Bucket on Ground
154.7 in / 3931 mm
Clearance at Maximum Lift and Dump
94.5 in / 2399 mm
Bucket Pin Height - Maximum Lift
126.3 in / 3208 mm
Maximum Overall Height
158.7 in / 4032 mm
Roll Back Angle
25°
Turning Radius from Center - Machine Rear
74 in / 1881 mm
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Hydraulic System
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
4061 psi / 28000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi / 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
44 HP / 33 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow
23 gal/min / 86 l/min
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
32 gal/min / 121 l/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
76 HP / 57 kW
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - Two Speed
8.4 mile/h / 13.5 km/h
Travel Speed - Forward or Reverse - One Speed
5.2 mile/h / 8.4 km/h
Engine
Net Power - SAE 1349
95 HP / 71 kW
Displacement
232 in³ / 3.8 l
Bore
3.9 in / 100 mm
Stroke
4.7 in / 120 mm
Service Refill Capacities
Cooling System
4.1 gal (US) / 16 l
Engine Crankcase
3.5 gal (US) / 13 l
Fuel Tank
31.7 gal (US) / 120 l
Hydraulic System
14.5 gal (US) / 55 l
Hydraulic Tank
10.3 gal (US) / 39 l
Engine
Net Power
95 HP / 71 kW
Net Power - ISO 9249
95 HP / 71 kW
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) / 19 l
Engine
Engine Model
Cat C3.8 DIT (turbo)
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Operating Specifications
Tipping Load
9945 lb / 4520 kg
Breakout Force - Tilt Cylinder
7270 lb / 3298 kg
Breakout Force - Lift Cylinder
6162 lb / 2795 kg
Rated Operating Capacity with Optional Counterweight
5240 lb / 2380 kg
Ground Contact Area - With 400 mm/15.7 in Track
2184 in² / 1.41 m²
Ground Pressure - With 400 mm/15.7 in Track
5.3 psi / 36.4 kPa
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacities - 50% Tipping Load
4970 lb / 2255 kg
Ground Contact Area - With 450 mm/17.7 in Track
2463 in² / 1.59 m²
Ground Pressure - With 450 mm/17.7 in Track
4.7 psi / 32.1 kPa
Noise Level
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Inside Cab*
83 dB(A) / 83 dB(A)
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab**
104 dB(A) / 104 dB(A)
Engine
Peak Torque - 1,500 rpm - SAE J1995
246 ft·lbf / 334 N·m
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
- 299D3 Product Brochure (pdf)
- 239D3/249D3/259D3/279D3/289D3/299D3/299D3 XE Product Brochure (pdf)
- 299D3 with Steel Track Undercarriage Product Brochure (pdf)
- Advanced Display User Guide for Skid Steer, Compact Track, and Multi Terrain Loaders - D/D2/D3 Series (pdf)
- Retrofit Options and Accessories Guide for Compact Track, Skid Steer and Multi Terrain Loaders (pdf)