D1 Small Dozer

NEW | 2023 CAT D1

LISTING DETAILS

Model
D1
Product Family
DOZERS
Manufacturer
CAT
Year
2023
Serial Number
0XKF04267
Location
SAN DIEGO, RANCHO BERNARDO
Unit Number
H18407
Specs & Pricing
  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • POWER TRAIN
    • Air cleaner with precleaner, automatic dust ejection and underhood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat® C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • ELECTRICAL
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • UNDERCARRIAGE
    • SALT undercarriage (43 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Six roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • HYDRAULIC
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • CAT TECHNOLOGY
    • Low Slip Traction Control (included with ARO and Cat Grade 3D)
    • Slope Indicate
    • Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
    • Compatibility with radios and base stations from Trimble, Topcon, and Leica
    • Capability to install 3D grade systems from Trimble, Topcon, and Leica
  • ATTACHMENTS
    • Rigid drawbar
    • Front pull device
  • OPERATOR ENVIRONMENT
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco Mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic

Optional Equipment

  • POWER TRAIN
    • Air cleaner with external precleaner
    • Installation, winch
  • ELECTRICAL
    • Four integrated front LED lights, two rear LED
  • UNDERCARRIAGE
    • Abrasion undercarriage (38 section)
    • Track Pairs:
      – Track, 406 mm (16 in)
      – Track, 635 mm (25 in)
      – Track, 762 mm (30 in)
  • HYDRAULIC
    • Four valve for use with ripper
    • Four valve for use with winch
  • CAT TECHNOLOGY
    • Cat Grade with Slope Assist
    • Cat Grade with 3D
    • Blade Load Monitor (included with Cat Grade 3D)
    • AutoCarry (included with Cat Grade 3D)
    • Cat Product Link™ PLE643/PLE743 Cellular
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 10 in (254 mm) touchscreen grade display
    • Cat Command Console
    • Cat Command Station
  • ATTACHMENTS
    • Drawbar, towing
    • Machine security system
    • Mounting, winch
    • Ripper, parallelogram, includes three
    • shanks and teeth
    • Winch, hydraulic, high performance
    • Winch, hydraulic, retrieval
  • OPERATOR ENVIRONMENT
    • Power Pitch
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • OTHER
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether

Specs

Overview

Long Name:
D1 Dozer
Name:
D1
Brand:
Caterpillar
Status:
Current

Engine

Engine Model
Cat C3.6
Power - Net
80 HP / 59.7 kW
Displacement
220 in³ / 3.6 l
Net Power - 2,200 rpm - SAE J1349
80 HP / 59.7 kW
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
80 HP / 59.7 kW

Engine 

Power Train 
Hydrostatic

Engine

Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Weights 

Operating Weight
17855 lb / 8099 kg

Weights

Operating Weight - LGP
18839 lb / 8545 kg
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in
19295 lb / 8752 kg
Note (2)
For machine with ripper, add 554 kg (1,222 lb).

Cab

FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008

Transmission

Drive Pumps
1
Maximum Travel Speed - Reverse
6.2 mile/h / 10 km/h
Relief Valve Settings
7033 psi / 48500 kPa
Maximum Travel Speed - Forward
5.6 mile/h / 9 km/h
Track Motors
2

Undercarriage

Length - Track on Ground - LGP, 762 mm (30 in)
89 in / 2248 mm
Length - Track on Ground - LGP
89 in / 2248 mm
Track Gauge - LGP
68 in / 1725 mm
Shoe Width - LGP, 762 mm (30 in)
30 in / 762 mm
Track Gauge - LGP, 762 mm (30 in)
73 in / 1860 mm
Shoe Width - LGP
25 in / 635 mm
Track Gauge
59 in / 1495 mm
Shoe Width - Standard
16 in / 406 mm
Ground Pressure - LGP
4.3 psi / 29.9 kPa
Ground Pressure - LGP, 762 mm (30 in)
3.7 psi / 25.5 kPa
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
Number of Rollers - Each Side
6

Undercarriage 

Length of Track on Ground 
89 in / 2248 mm
Number of Shoes - Each Side - Abrasion Undercarriage 
38
Ground Pressure 
6.45 psi / 44.5 kPa

Service Refill Capacities

Final Drive - Each - LGP
2.6 gal (US) / 10 l
Cooling System
4.2 gal (US) / 19 l
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US) / 19 l
Transmission - Hydraulic Tank
23.8 gal (US) / 90 l
Crankcase - With Filter
2.8 gal (US) / 10.5 l
Fuel Tank
51.5 gal (US) / 195 l

Service Refill Capacities 

Final Drives - Each Side 
2.6 gal (US) / 10 l

Hydraulic Controls

Pump Output
17.2 gal/min / 65 l/min
Relief Valve Settings
2988 psi / 20600 kPa

Ripper

Type
Parallelogram
Number of Shanks
3
Height
6.5 in / 165 mm
Weight
1222 lb / 554 kg
Maximum Ground Clearance Under Tip
17.6 in / 448 mm
Maximum Digging Depth
13.3 in / 337.5 mm
Overall Width
67.3 in / 1710 mm
Maximum Reach - Ground Line
30.2 in / 766 mm

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions

BLADE: Blade Capacity (SAE) - LGP
2.17 yd³ / 1.99 m³
BLADE: Blade Lift Height - LGP
28.7 in / 730 mm
BLADE: Maximum Tilt - LGP
17.2 in / 438 mm
BLADE: Blade Width - LGP
124 in / 3149 mm
Ground Clearance - LGP
13 in / 332 mm
BLADE: Blade Width at Maximum Angle - LGP
113.1 in / 2874 mm
BLADE: Digging Depth - LGP
23 in / 583 mm
Track Gauge - LGP
67.9 in / 1725 mm
Ground Clearance - LGP, 762 mm (30 in)
13 in / 332 mm
BLADE: Blade Height - LGP
33.8 in / 860 mm
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8 in / 4262 mm
Track Gauge - LGP, 762 mm (30 in)
73 in / 1860 mm
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
BLADE: Maximum Angle (either side) - LGP
25°
Overall Length - With Blade - LGP
167.8 in / 4262 mm

Dimensions 

BLADE: Blade Width at Maximum Angle - Standard 
95.2 in / 2417 mm
BLADE: Digging Depth - Standard 
23.2 in / 589 mm
BLADE: Blade Width - Standard 
104.2 in / 2646 mm
BLADE: Blade Lift Height - Standard 
28.7 in / 730 mm
Ground Clearance - Standard 
13 in / 332 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Standard 
52° to 58°
BLADE: Maximum Angle (either side) - Standard 
25°
BLADE: Maximum Tilt - Standard 
14.5 in / 368 mm
BLADE: Blade Capacity (SAE) - Standard 
1.99 yd³ / 1.52 m³

Dimensions

Note
*Abrasion Undercarriage

Dimensions 

Track Gauge - Standard 
58.9 in / 1495 mm
BLADE: Blade Height - Standard 
35.8 in / 910 mm
Overall Length - With Blade - Standard 
168 in / 4273 mm
Note 
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)

Dimensions

Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6 in / 3291 mm
Width of Dozer (standard shoes, no blade) - Standard
74.8 in / 1900 mm
Length of Basic Dozer (without blade) - Standard
129.6 in / 3291 mm
Length of Basic Dozer (without blade) - LGP
129.6 in / 3291 mm
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
94.9 in / 2411 mm
Dozer Height - LGP
108.9 in / 2765 mm
Width of Dozer (standard shoes, no blade) - LGP
92.9 in / 2360 mm
Dozer Height - LGP, 762 mm (30 in)
108.9 in / 2765 mm
Dozer Height - Standard
108.9 in / 2765 mm

Retrieval Winch

Weight
1747 lb / 794 kg
Maximum Line Pull - Full Drum
79 ft/min / 24 m/min
Drum Capacity - Recommended Cable
277 ft / 84 m
Maximum Line Pull - Bare Drum
50 ft/min / 15 m/min
Drum Capacity - Optional Cable
195 ft / 59 m
Maximum Line Speed - Full Drum
20350 lb / 9231 kg
Control
Hydraulic
Maximum Line Speed - Bare Drum
32150 lb / 14583 kg
Rope Diameter - Optional
0.75 in / 19 mm
Winch Drive
Hydraulic
Rope Diameter - Recommended
0.63 in / 16 mm
Speed
Variable
Drum Diameter
8 in / 203.2 mm
Drum Width
9.65 in / 245 mm
Throat Clearance
5.6 in / 141.4 mm
Winch Length
35.63 in / 905 mm
Overall width
27.91 in / 709 mm

High Performance Winch

Weight
1345 lb / 610 kg
Drum diameter
10 in / 254 mm
Winch drive
Hydrostatic
Winch length
27.76 in / 705 mm
Maximum line pull – bare drum
40000 lb / 18144 kg
Maximum line speed – full drum
207 ft/min / 63 m/min
Drum width
10.8 in / 274 mm
Drum capacity – optional
256 ft / 78 m
Rope diameter – recommended
0.63 in / 16 mm
Maximum line pull – full drum
25000 lb / 11340 kg
Rope diameter – optional
0.75 in / 19 mm
Speed
Variable
Maximum line speed – bare drum
131 ft/min / 40 m/min
Throat clearance
6.75 in / 171.5 mm
Drum capacity – recommended cable
371 ft / 113 m
Overall width
29.2 in / 741 mm
Control
Hydraulic