NEW | 2023 CAT D1
LISTING DETAILS
Model
D1
Product Family
DOZERS
Manufacturer
CAT
Year
2023
Serial Number
0XKF04165
Location
SAN DIEGO, RANCHO BERNARDO
Unit Number
038066
Specs & Pricing
Unit Specifications
LANE 2 ORDER
ENGINE, CAT C3.6
AIR CLEANER W/O PRECLEANER
UNDERCARRIAGE, SALT
TRACK, 16", MS, SALT
HYDRAULICS, 4 VALVE, PUMP STD
CONTROL, PITCH
LIGHTS, 6
CAB, ROPS, HEATER & A/C
TENSIONER, EROPS, AC
SEAT, CLOTH, HEATED
SOUND SUPPRESSION, OMISSION
ARO W/ASSIST
PROD LINK, PLE643/PLE743 RADIO
GRILL, RADIATOR
GUARD GP, REAR OMISSION
GUARD, BELLY
FAN, STANDARD
COOLER, STANDARD
RIPPER
COUNTERWEIGHT, FRONT
BLADE, 104.2", ACCUGRADE
SERIALIZED TECHNICAL MEDIA KIT
INSTRUCTIONS, ANSI
STANDARD RADIO (12V)
GUARD, TRACK ROLLER, FULL,SALT
SHIPPING/STORAGE PROTECTION
ATHENS DEALER PDI & FUEL
PACKING, LAST MILE PROGRAM
KH7V73
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- POWER TRAIN
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat® C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
- ELECTRICAL
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
- UNDERCARRIAGE
- SALT undercarriage (43 section)
- Carrier rollers
- Guards, front/rear guiding
- Six roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
- HYDRAULIC
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
- CAT TECHNOLOGY
- Low Slip Traction Control (included with ARO and Cat Grade 3D)
- Slope Indicate
- Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
- Compatibility with radios and base stations from Trimble, Topcon, and Leica
- Capability to install 3D grade systems from Trimble, Topcon, and Leica
- ATTACHMENTS
- Rigid drawbar
- Front pull device
- OPERATOR ENVIRONMENT
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
Optional Equipment
- POWER TRAIN
- Air cleaner with external precleaner
- Installation, winch
- ELECTRICAL
- Four integrated front LED lights, two rear LED
- UNDERCARRIAGE
- Abrasion undercarriage (38 section)
- Track Pairs:
– Track, 406 mm (16 in)
– Track, 635 mm (25 in)
– Track, 762 mm (30 in)
- HYDRAULIC
- Four valve for use with ripper
- Four valve for use with winch
- CAT TECHNOLOGY
- Cat Grade with Slope Assist
- Cat Grade with 3D
- Blade Load Monitor (included with Cat Grade 3D)
- AutoCarry (included with Cat Grade 3D)
- Cat Product Link™ PLE643/PLE743 Cellular
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 10 in (254 mm) touchscreen grade display
- Cat Command Console
- Cat Command Station
- ATTACHMENTS
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three
- shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
- OPERATOR ENVIRONMENT
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
- OTHER
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether
Specs
Overview
Long Name:
D1 Dozer
Name:
D1
Brand:
Caterpillar
Status:
Current
Engine
Engine Model
Cat C3.6
Power - Net
80 HP / 59.7 kW
Displacement
220 in³ / 3.6 l
Net Power - 2,200 rpm - SAE J1349
80 HP / 59.7 kW
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
80 HP / 59.7 kW
Engine
Power Train
Hydrostatic
Engine
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
Operating Weight
17855 lb / 8099 kg
Weights
Operating Weight - LGP
18839 lb / 8545 kg
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in
19295 lb / 8752 kg
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Cab
FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
Transmission
Drive Pumps
1
Maximum Travel Speed - Reverse
6.2 mile/h / 10 km/h
Relief Valve Settings
7033 psi / 48500 kPa
Maximum Travel Speed - Forward
5.6 mile/h / 9 km/h
Track Motors
2
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)
89 in / 2248 mm
Length - Track on Ground - LGP
89 in / 2248 mm
Track Gauge - LGP
68 in / 1725 mm
Shoe Width - LGP, 762 mm (30 in)
30 in / 762 mm
Track Gauge - LGP, 762 mm (30 in)
73 in / 1860 mm
Shoe Width - LGP
25 in / 635 mm
Track Gauge
59 in / 1495 mm
Shoe Width - Standard
16 in / 406 mm
Ground Pressure - LGP
4.3 psi / 29.9 kPa
Ground Pressure - LGP, 762 mm (30 in)
3.7 psi / 25.5 kPa
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
Number of Rollers - Each Side
6
Undercarriage
Length of Track on Ground
89 in / 2248 mm
Number of Shoes - Each Side - Abrasion Undercarriage
38
Ground Pressure
6.45 psi / 44.5 kPa
Service Refill Capacities
Final Drive - Each - LGP
2.6 gal (US) / 10 l
Cooling System
4.2 gal (US) / 19 l
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US) / 19 l
Transmission - Hydraulic Tank
23.8 gal (US) / 90 l
Crankcase - With Filter
2.8 gal (US) / 10.5 l
Fuel Tank
51.5 gal (US) / 195 l
Service Refill Capacities
Final Drives - Each Side
2.6 gal (US) / 10 l
Hydraulic Controls
Pump Output
17.2 gal/min / 65 l/min
Relief Valve Settings
2988 psi / 20600 kPa
Ripper
Type
Parallelogram
Number of Shanks
3
Height
6.5 in / 165 mm
Weight
1222 lb / 554 kg
Maximum Ground Clearance Under Tip
17.6 in / 448 mm
Maximum Digging Depth
13.3 in / 337.5 mm
Overall Width
67.3 in / 1710 mm
Maximum Reach - Ground Line
30.2 in / 766 mm
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
BLADE: Blade Capacity (SAE) - LGP
2.17 yd³ / 1.99 m³
BLADE: Blade Lift Height - LGP
28.7 in / 730 mm
BLADE: Maximum Tilt - LGP
17.2 in / 438 mm
BLADE: Blade Width - LGP
124 in / 3149 mm
Ground Clearance - LGP
13 in / 332 mm
BLADE: Blade Width at Maximum Angle - LGP
113.1 in / 2874 mm
BLADE: Digging Depth - LGP
23 in / 583 mm
Track Gauge - LGP
67.9 in / 1725 mm
Ground Clearance - LGP, 762 mm (30 in)
13 in / 332 mm
BLADE: Blade Height - LGP
33.8 in / 860 mm
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8 in / 4262 mm
Track Gauge - LGP, 762 mm (30 in)
73 in / 1860 mm
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
BLADE: Maximum Angle (either side) - LGP
25°
Overall Length - With Blade - LGP
167.8 in / 4262 mm
Dimensions
BLADE: Blade Width at Maximum Angle - Standard
95.2 in / 2417 mm
BLADE: Digging Depth - Standard
23.2 in / 589 mm
BLADE: Blade Width - Standard
104.2 in / 2646 mm
BLADE: Blade Lift Height - Standard
28.7 in / 730 mm
Ground Clearance - Standard
13 in / 332 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
BLADE: Maximum Angle (either side) - Standard
25°
BLADE: Maximum Tilt - Standard
14.5 in / 368 mm
BLADE: Blade Capacity (SAE) - Standard
1.99 yd³ / 1.52 m³
Dimensions
Note
*Abrasion Undercarriage
Dimensions
Track Gauge - Standard
58.9 in / 1495 mm
BLADE: Blade Height - Standard
35.8 in / 910 mm
Overall Length - With Blade - Standard
168 in / 4273 mm
Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Dimensions
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6 in / 3291 mm
Width of Dozer (standard shoes, no blade) - Standard
74.8 in / 1900 mm
Length of Basic Dozer (without blade) - Standard
129.6 in / 3291 mm
Length of Basic Dozer (without blade) - LGP
129.6 in / 3291 mm
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
94.9 in / 2411 mm
Dozer Height - LGP
108.9 in / 2765 mm
Width of Dozer (standard shoes, no blade) - LGP
92.9 in / 2360 mm
Dozer Height - LGP, 762 mm (30 in)
108.9 in / 2765 mm
Dozer Height - Standard
108.9 in / 2765 mm
Retrieval Winch
Weight
1747 lb / 794 kg
Maximum Line Pull - Full Drum
79 ft/min / 24 m/min
Drum Capacity - Recommended Cable
277 ft / 84 m
Maximum Line Pull - Bare Drum
50 ft/min / 15 m/min
Drum Capacity - Optional Cable
195 ft / 59 m
Maximum Line Speed - Full Drum
20350 lb / 9231 kg
Control
Hydraulic
Maximum Line Speed - Bare Drum
32150 lb / 14583 kg
Rope Diameter - Optional
0.75 in / 19 mm
Winch Drive
Hydraulic
Rope Diameter - Recommended
0.63 in / 16 mm
Speed
Variable
Drum Diameter
8 in / 203.2 mm
Drum Width
9.65 in / 245 mm
Throat Clearance
5.6 in / 141.4 mm
Winch Length
35.63 in / 905 mm
Overall width
27.91 in / 709 mm
High Performance Winch
Weight
1345 lb / 610 kg
Drum diameter
10 in / 254 mm
Winch drive
Hydrostatic
Winch length
27.76 in / 705 mm
Maximum line pull – bare drum
40000 lb / 18144 kg
Maximum line speed – full drum
207 ft/min / 63 m/min
Drum width
10.8 in / 274 mm
Drum capacity – optional
256 ft / 78 m
Rope diameter – recommended
0.63 in / 16 mm
Maximum line pull – full drum
25000 lb / 11340 kg
Rope diameter – optional
0.75 in / 19 mm
Speed
Variable
Maximum line speed – bare drum
131 ft/min / 40 m/min
Throat clearance
6.75 in / 171.5 mm
Drum capacity – recommended cable
371 ft / 113 m
Overall width
29.2 in / 741 mm
Control
Hydraulic
- D1 Small Product Brochure (pdf)
- D1 Large Product Brochure (pdf)
- D1 SSLGP Small Product Brochure (pdf)
- D1, D2, D3 Fire Suppression Dozers Product Brochure (pdf)
- D1 Mulcher Product Brochure (pdf)
- D1, D2, D3 Shiphold Product Brochure (pdf)
- Options and Accessories Kit Guide for Small Track Type Tractors (pdf)