NEW | Excavators - 302.4D

original
*The model image shown is for demonstration purposes only. Contact dealer for complete unit details.
Listing Details
Description
Model:302.4D
Product Family:Excavators
Manufacturer:CAT
Year:2018
Serial Number:0LJ600288
Location:SAN DIEGO, RANCHO BERNARDO
Unit Number:H16209
Machine Spec Detail
302.4D MINI HYD EXC, T4 (NTE)
ALARM, TRAVEL
CONTROLS, PATTERN CHANGER
AUTO IDLE
BELT, SEAT, 2" RETRACTABLE
VALVE, AUXILIARY RELIEF
CANOPY
LINES, AUX, 2WAY, PROP,LNG STK
BLADE, DOZER, FIX, STD W/FLOAT
STICK, LONG, THUMB READY
LINES, 2ND AUX, NONE, PROP
INSTRUCTIONS, ANSI, CANOPY
MANUAL, OPER. MAINT. ENGLISH
PACK, MHE COMPLETE, CONTAINER
PACK, FLUID FILM
 
General Machine Specifications

The Cat® 302.4D provides power and efficiency so that you can get the best out of your job without ever feeling the strain. You can be assured of faster, more powerful digging with a smoother response.

Engine
Engine ModelYanmar 3TNV76
Net Power17.7 HP
Displacement40 in³
Rated Net Power - 2,200 rpm - ISO 924917.7 HP
Gross Power - ISO 1439624.3 HP
Weights
Operating Weight5115 lb
Operating Weight - With Cab5115 lb
Operating Weight - With Canopy4872 lb
Transport Weight - With Cab4795 lb
Transport Weight - With Canopy4553 lb
Travel System
Gradeability30°/58%
Travel Speed2.5 km/h-4 km/h (1.55 mph-2.5 mph)
Hydraulic System
Operating Pressure - Equipment3481 psi
Operating Pressure - Travel3481 psi
Operating Pressure - Swing2176 psi
Pump Flow at 2,200 rpm26.1 + 26.1 + 19.4 + 6.4 L/min (6.9 + 6.9 + 5.1 + 1.7 gal/min)
Maximum Stick Force - Long Stick2990 lb
Auxiliary Circuits - Primary30 L/min at 170 bar (8 gal/min at 2,465 psi)
Maximum Stick Force - Standard Stick3372 lb
Maximum Bucket Force4900 lb
Auxiliary Circuits - Secondary17 L/min at 200 bar (4.5 gal/min at 2,900 psi)
Blade
Width55 in
Height11.8 in
Dig Depth13 in
Lift Height11.5 in
Service Refill Capacities
Fuel Tank Capacity6.3 gal (US)
Hydraulic Tank Capacity5 gal (US)
Dimensions (Approximate) - Standard Stick
Maximum Reach - Ground Level13.19 ft
Maximum Digging Depth7.87 ft
Boom Swing Angle - RH48 °
Maximum Dump Height9 ft
Maximum Vertical Dig Depth5.15 ft
Transport Length - Arm Lowered13.22 ft
Maximum Dozer Dig Depth13 in
Maximum Dozer Lift Height12 in
Height7.84 ft
Maximum Boom Offset - RH20 in
Tail Swing Radius3.84 ft
Maximum Dig Height12.96 ft
Length - Undercarriage6 ft
Boom Swing Angle - LH77°/64°
Maximum Boom Offset - LH14 in
Width4.59 ft
Dimensions (Approximate) - Long Stick
Maximum Dig Height13.35 ft
Width4.59 ft
Maximum Vertical Dig Depth5.74 ft
Maximum Dump Height9.42 ft
Length - Undercarriage6 ft
Maximum Dozer Lift Height12 in
Maximum Dozer Dig Depth13 in
Maximum Boom Offset - LH14 in
Tail Swing Radius3.84 ft
Boom Swing Angle - RH48 °
Maximum Reach - Ground Level13.85 ft
Transport Length - Arm Lowered13.22 ft
Maximum Digging Depth8.53 ft
Boom Swing Angle - LH77°/64°
Maximum Boom Offset - RH20 in
Height7.84 ft
Operating Specifications
Stick Length - Standard42 in
Stick Length - Long49.2 in
Machine Overhang18.1 in

High Flexibility

Compact in size and with a transport weight under 2300 kg (5,070 lb), the 302.4D can be transported easily using a conventional trailer and pick up truck or transit van. The sturdy hoisting eyelets on the cab roof enable the easy and rapid relocation of the machine between sites.

Automatic Swing Lock

Safe transportation of the machine is aided by the Cat automatic swing lock which locks the machines upper body in place when the control console is raised or the engine is stopped.

Work Tools

A variety of purpose designed work tools are available, including buckets, quick couplers, hammer and auger. All Cat tools are built to last and matched to your machine to deliver excellent value and optimize performance.

Auxiliary Hydraulics as Standard Fit

Machine is ‘ready to work.' Hammer and two way lines complete with quick disconnect fittings are standard. Connections are located close to the tool to reduce hose lengths and any potential damage. Additional line options are available to further increase machine versatility. Stick and bucket cylinder hoses are protected by routing them through the boom.

Auxiliary Flow Control

Machines configured with proportional auxiliary hydraulics, include the ability to adjust the flow for even greater tool control. Especially useful with tools such as angling ditching buckets.

Thumb Ready Stick (North American Builds)

The 302.4D is configured with brackets and relief valves for simple and cost effective mounting of a hydraulic thumb.

Built Tough

The front end of the 302.4D is designed for hard work. Its rugged construction and protected hydraulics ensure that the machine is up to the toughest of jobs. Steel tubes, positioned above the boom supply the hydraulic fluid to the tools, ensuring protection from damage while keeping any maintenance quick and easy. Components have been located to ensure the best possible machine center of gravity and weight distribution and give operator confidence over a range of terrain and applications.

Dozer Float

Ground levelling and finishing applications are fast and easier with the dozer float function engaged making site clean-up much more efficient.

Dig Force

The 302.4D boasts high bucket and stick forces making it an impressive and productive excavator. The choice of two stick lengths allows the customer to configure his machine to deliver even higher stick forces or longer reach. You have the choice, we have the solution. All hydraulic functions are fully pilot operated, delivering effortless operation, reducing maintenance and lowering owner operating costs.

The Cat 302.4D cab is amongst the largest in the industry. The flat cab floor optimizes visibility and increases operator leg room. The ergonomic control layout provides a comfortable, highly productive workspace. The large two-part front windscreen allows the driver to slide both lower and upper panes beneath the cab roof, so protecting them from damage when the front screen is wide open. This also negates the need to remove or store the bottom windscreen pane away separately.

100% Pilot Controls

All hydraulic functions are fully pilot operated, delivering effortless operation, reducing maintenance and lowering owner operating costs. ‘As new' machine controllability is maintenance free without the need for adjustment of linkages or cables. Auxiliary and boom swing services are controlled by proportional switches mounted on the joysticks.

2 Way Canopy Access

Canopy builds allow the operator to enter and exit the operator station from both sides of the machine, helping to increase productivity and making working around site much easier.

Easy Maintenance and Service

All daily checks and regular service points, are easily accessed. A large steel rear door and removable panels allow room to efficiently work on the machine when required. The main hydraulic valve and lines are also easily reached through a removable floor plate and side panels. Durable steel body panels all round the machine offer good resistance to damage and are easily maintained to help keep the machine looking good and holding its value. Both side plates and the cab floor plate are easy to remove and provide unhindered access to all internal hydraulic components.

Unmatched support makes the difference

Your Cat dealer is ready to assist you with your purchase decision and everything after.

  • Financing packages are flexible to meet your needs
  • Unmatched parts availability keeps you working
  • Make comparisons of machines, with estimates of component life, preventative maintenance and cost of production
  • For more information on Cat products, dealer services and industry solutions, visit www.cat.com

Standard Equipment

Automatic swing park brake
Auxiliary quick disconnect couplers
Canopy - ROPS and TOPS protection
Dozer blade
Dozer float
Fixed undercarriage
Hammer/two way auxiliary hydraulic lines
Hydraulic oil cooler
Maintenance free battery
Retractable seat belt
Rubber track 250 mm (10 in) wide
Suspension seat, vinyl covered
Travel pedals
Working light mounted to boom

Optional Equipment

Additional hydraulic circuit diverted from bucket cylinder
Auto engine idle
Boom stick or dozer blade check valve
Cab, radio ready - ROPS and TOPS protection, heater/defroster and windscreen washer/wiper
Cab top guard to ISO 10262 (Level 1)
Cab/canopy lights
Joystick mounted proportional auxiliary control with flow control
Long stick
Mirror pack
Removable swing stop
Second auxiliary lines
Suspension seat, fabric covered

listofrelationships

original

original

original

original

I am interested in this listing