New | TL642D Telehandler with Stabilizers

The TL642D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Engine
Engine ModelCat® C3.4B
Gross Power - Basic100 HP
NoteMeets U.S. EPA Tier 4 Final emission standards.
Weights
Operating Weight22928 lb
Operating Specifications
Rated Load Capacity6500 lb
Maximum Lift Height42 ft
Maximum Forward Reach30 ft
Top Travel Speed20 mile/h
Capacity at Maximum Height (o/r Up)6000 lb
Capacity at Maximum Reach (o/r Down)1700 lb
Capacity at Maximum Reach (o/r Up)600 lb
Capacity at Maximum Height (o/r Down)6500 lb
Turning Radius - Over Tires12 ft
Drawbar Pull - Loaded19783 lbf
Frame Leveling10°
Tires
Standard370/75-28 Air Duraforce
Optional (1)370/75-28 Foam Duraforce
Optional (4)13.00 × 24 Solid
Optional (3)13.00 × 24-12 PR Foam Filled
Optional (2)13.00 × 24-16 PR Air
Hydraulic System
Gear PumpSingle-section
NoteAuxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure3770 psi
Auxiliary Hydraulic Pressure3481 psi
Auxiliary Hydraulic Flow18 gal/min
Service Refill Capacities
Fuel Tank38.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank5.7 gal (US)
Hydraulic System42 gal (US)
Boom Performance
Boom Up15.5 s
Boom Down10.7 s
Tele In11.8 s
Tele Out17 s
Brakes
Parking BrakesWet disc, spring applied hydraulic release on front axle
Service BrakesInboard wet disc brakes on front and rear axles
Axles
Type (1)Trunnion mounted planetary 55 degree steer axles
Type (2)High bias limited slip differential on front axle
Work Tools
Carriages - Standard Rotate50 in
Pallet Forks - Option 3[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Pallet Forks - Option 1[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Wide Tilt72 in
Cubing Forks[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Swing100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Standard Tilt50 in
Pallet Forks - Option 2[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Dual Fork Positioning50 in
Carriages - Side Shift48 in
Carriages - Wide Rotate72 in
Lumber Forks - Option 2[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Hydraulic IT CouplerIncludes Auxiliary Electrics
Lumber Forks - Option 1[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Transmission Speeds
Forward4 speed
Reverse3 speed

listofrelationships

original

Other Models in this Category

Select Product Category