New | CM43C (V-Type)

Caterpillar electric power stands for reliable energy supply. Especially during the energy system transformation, Cat generator sets close the energy gap caused by renewable energy source such as wind and photo voltaic. Short ramp up time, low operating costs and rapid maintenance times ensures a high availability according to the need of our customers. Combined heat /cool and power solutions allow our customers to maximize the efficiency and earnings paired with low emissions. Wherever power is needed around the globe, Caterpillar is able to support you with the best products and services to maximize your profit.

Generator Set Specifications
Minimum Rating11170 kWe
Maximum Rating14890 kWe
Emissions/Fuel Strategy(WB) Cert stage 1 and 2
Voltage3000 to 13800 Volts
Frequency At Speed50 Hz @ 500 / 60 Hz @ 514
Duty CyclePrime, Continuous
Ready To Accept Loads (Preheated/Vented)40 s
Normal Ramp Up To 100% Load95 s
Emergency Ramp Up 10% To 100% Load35 s
Genset Efficiency Up To48.90%
Engine Specifications
Engine ModelCM43C V-Type, 4-stroke-engine
Bore16.93 in
Stroke24.02 in
AspirationTurbocharged-aftercooled
Engine Rating Range11400 - 15200 kW
Configuration12,16 cylinder
Fuel TypeDiesel oil / heavy fuel oil (HFO) / crude oil
Swept Volume5406 in³
Mean Effective Pressure Up To374 psi
Generator Set Dimensions
Length - Minimum562 in
Length - Maximum652 in
Width - Minimum162 in
Width - Maximum162 in
Height - Minimum183 in
Height - Maximum188 in
Dry Weight - Genset (minimum)500449 lb
Dry Weight - Genset (maximum)630521 lb

  • intensive Cooling Of Key Components Including Exhaust Valve Seats, Injector Cooling Integrated Into Lube Oil System
  • reliable, Proven And High Efficient Single Turbo Charging System
  • classification Society Standards Ensure High Safety And Quality
  • intelligent Simplicity Ensures A Robust Engine Platform
  • optimized Service Schedules Enable High Availability And Long Durability

  • ultrafast Start Time And Load Acceptance
  • no Engine Start Limitations
  • continuous Power (base And Peak Load), Prime Power, Stand-By
  • part Load With High Efficiency
  • monitoring For Unattended Operation
  • asset Intelligence System

  • reduced Complexity Of Standard Modular Design Allows An Easy Installation
  • low Space Requirements Between The Gensets
  • genset Is Ready For Installation
  • generator Set Designed For Direct Elastic Mounting

  • low Fuel And Oil Consumption
  • low Maintenance Requirements
  • operator And Maintenance Training Courses Available

  • high Reliability, Modular Design And Integral Construction Reduce The Number Of Components By 40% Over Conventional Designs E.G.:
    - Dry Engine Block With Integrated Ducts For Lubricating Oil And Charge Air And Underslung Crankshaft
    - Compact Cylinder Head Design
  • smart Maintenance Solutions:
    - Easily Removable Cylinder Heads, Quick Removable Fluid Connections
    - Split Connecting Rods To Allow Fast And Easy Piston Removal Without Disturbing The Big End Bearing
    - Segmental Camshaft Design
    - Simplified Parts Spectrum By Using Single-Pipe Exhaust Gas
    - Engine Block Free From Cooling Water
  • state-Of-Art Material Ensures Long Life Time

  • smart Maintenance Solutions Allow An Easy Component Accessibility
  • large Inspection Openings Afford An Easy Serviceability To Core Engine Internals
  • core Engine Components Designed For Reconditioning And Reuse
  • short Maintenance Times Enable High Availability
  • no Engine Removal Necessary For Maintenance And Overhauls

  • liquid: Light Fuel Oil (lfo), Crude Oil And Heavy Fuel Oil (hfo) With Fuel Quality Up To 700 Cst/50°c According To Cimac H55/K55
  • dual:
    - Light Fuel Oil (lfo), Crude Oil And Heavy Fuel Oil (hfo) With Fuel Quality Up To 700 Cst/50°c According To Cimac H55/K55
    - Natural Gas With Methane Number > 80 And Lower Heating Value Of 28mj/Nm3
  • gaseous: Natural Gas With Methane Number > 80 And Lower Heating Value Of 31.5 Mj/Nm3

  • world Bank Emission Certification (stage 2)
  • technische Anleitung (ta) Luft (only Gas)
  • post-Emission Treatment Systems For Lower Emission Requirements Available

  • assistance For Planning - Delivery - Commissioning - Operation And Service)
  • expertise And Experience For Solutions To Maximize Benefits, E.G. Combine Heat And Power Systems (chp)

Standard Equipment

Fuel System
  • Engine ventilation module (only dual fuel (DF) and gas)
  • Circulation module
  • Separator module
  • Ignition fuel oil module (only dual fuel (DF))
  • Gas valve unit (GVU) (only dual fuel (DF) and gas)
  • Pre-pressure module
Lubricating Oil System
  • Combined module: cooling water system and lube oil system
  • Piping interface module
  • Lube oil separator module
Cooling Water System
  • Piping interface module
  • Cooling water system with radiators
  • Combined module: see lube oil system
Starting System
  • Starting air compressor module
  • Starting air receiver module
Combustion Air System
  • Air filter - pocket
  • Air filter - oil bath
  • Air filter - pulse
Exhaust System
  • Selective catalytic reduction (SCR) system
  • Exhaust gas ventilation module (only dual fuel (DF) and gas)
  • Oxidation catalytic (Oxicat) converter system
  • Exhaust gas silencer
Control & Monitoring System
  • Gas leak detection per cylinder (only dual fuel (DF) and gas)
  • Engine monitoring package
  • Local data panel (LDP) / generator control panel (GCP)
  • Local control panel (LCP)
  • Motor control center module (MCC)
Mounting System
  • Elastic mounting - genset/engine

listofrelationships

original

Other Models in this Category

Select Generator Type


Hawthorne Power Systems Logo

Request a Quote

Why Cat is Better. Machine Comparison

"
With only a few days notice, we were able to get the emergency system working properly. Hawthorne Cat provided great leadership and excellent field support.
Mark Cripe
Helix Electric
"

San Diego - Power
Kyle Farmer
Engine Business Manager
858.376.6821 office
760.715.9565 mobile
kfarmer@hawthornecat.com

Tim Roberts
Product Support
General Manager
858.376.6820 office
858.583.8460 mobile
troberts@hawthornecat.com

Mark Reza
Used Engine Sales Manager
858.376.6840 office
858.688.0076 mobile
mreza@hawthornecat.com

Phillip J. Smith (PJ)
Field Service Manager
858.376.6874 office
858.688.0134 mobile
psmith@hawthornecat.com

Hawaii – Power
Cliff Yuen
Director of Sales & Rentals
808.676.0322 office
808.349.7767 mobile
cyuen@hawthornecat.com

Guam – Power
Myver Hecita
Power Systems Rental &
Sales Representative
671.649.4241 office
671.898.2740 mobile
mhecita@hawthornecat.com