New | Cat® C13B Diesel Engine

The Cat® C13B engine supplies remarkable power and torque in a smaller, lighter engine package. With a aftertreatment that is 65% smaller and 54% lighter than its current equivalent and over 34 kW/L of power density, the C13B is designed to allow OEMs to downsize their engine platforms, lower installation costs and maximize uptime by providing long lift in the toughest applications.

Power Rating
Maximum Power577 HP
Maximum Torque1943 lb-ft @ 1400 rpm
Rated Speed1800-2100 rpm
Minimum Power456 HP
Emission Standards
EmissionsEU Stage V
General
Engine ConfigurationIn-Line 6
Bore5.1 in
Stroke6.2 in
Displacement762.8 in³
Compression Ratio15.8:1
AspirationTurbocharged-Aftercooled (TA)
Combustion SystemDirect Injection
Rotation from Flywheel EndCounterclockwise
AftertreatmentDOC+DPF+SCR
Engine Dimensions - Approximate
Length50 in
Width39 in
Height45 in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments2480 lb
Aftertreatment Dimensions
Length35.3 in
Width31.8 in
Height18.1 in
Weight220 lb

With A 65% Reduction In Size And 63% In Weight From Its Previous Engine Equivalent, The Cat C13b Is Unparalled In Supporting Engine Downsizing Without An Impact To Overall Performance. And With An Absence Of An Egr, The C13b Provides A Simplfied Installation Process, Saving Oems Valauble Time And Costs.

Offering Peak Performance Across A Wide Range Of Speed, The Cat C13 Is Optimized To Perform At Its Best No Matter What Surprises The Job Site Brings. And With 20% More Power And 19% More Torque Than Its Predecessor Engine, The C13 Has Never Been More Ready To Take On The Tough Challenges Operators Meet Of Every Day.

Industrial, Agricultural And Construction Applications Such As: Compressors • Trenchers • Chippers • Grinders • Irrigation Equipment • Bore Rigs • Drill Rigs • Pumps • Hydraulic Power Units

The Cat C13b Utilizes Several Technologies To Deliver The Lowest Possible Fluid Consumption, Including An Overall Fuel Savings Of 6% When Compared To The Previous Engine Model. And Thanks To Caterpillar-Patented Technology The Egr Has Been Eliminated, Oil Intervals Are Rated At 500 Hours And 5,000 Hours For Ash Services, Helping Oems And Operators Save On Parts And Service Costs Over The Lifetime Of The Engine.

No Matter Where In The World The Cat C13 Is, It’s Backed By A Five-Year Warranty And The Reliable And Extensive Support The Cat Dealer Network Offers Across 71 Locations In 192 Countries.

At Caterpillar, Safety Is A Prioirty. It's Why We Put All Our Engines Through Rigous Rounds Of Testing And Validation—including More Than 120 Mililon Off-Highway Hours For The Cat C13b. We Make Our Engines Reliable, So Operators Can Focus On Keeping Their Work Site Safe, Secure And In Service.

Standard Equipment

Air Inlet System
  • Turbocharged
  • Air-to-Air Aftercooled
  • Front or rear exhaust configurations available
Control System
  • Electronic control system
  • Over-foam wiring harness
  • Automatic altitude compensation
  • Power compensated for fuel temperature
  • Configurable software features
  • Engine monitoring system SAE J1939 broadcast and control
  • Integrated Electronic Control Unit (ECU)
  • Remote fan control
Cooling System
  • Vertical or RH thermostat outlet
  • Centrifugal water pump
  • Guidance on cooling system design available through your dealer to ensure equipment reliability
Flywheels and Flywheel Housing
  • Available SAE No. 1 power take-off with optional SAE B or SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments.
Fuel System
  • Mechanical Electronic Unit Injector fuel system (MEUI-C)
  • Primary fuel filter
  • Secondary and tertiary fuel filters
  • Fuel transfer pump
  • Electronic fuel priming
Lube System
  • Open crankcase ventilation system
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Oil dipstick
  • Gear driven oil pump
  • Choice of front, rear or center sumps
  • Open crankcase ventilation system with fumes disposal (OCV filter system required for EU Stage V certification engines)
Power Take Off (PTO)
  • SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
General
  • Caterpillar yellow paint, with optional colors available at request
  • Vibration damper
  • Lifiting eyes

listofrelationships

original

original

original

original

original

Other Models in this Category

Hawthorne Power Systems Logo

Request a Quote

Why Cat is Better. Machine Comparison

"
With only a few days notice, we were able to get the emergency system working properly. Hawthorne Cat provided great leadership and excellent field support.
Mark Cripe
Helix Electric
"

San Diego - Power
Kyle Farmer
Engine Business Manager
858.376.6821 office
760.715.9565 mobile
kfarmer@hawthornecat.com

Tim Roberts
Product Support
General Manager
858.376.6820 office
858.583.8460 mobile
troberts@hawthornecat.com

Mark Reza
Used Engine Sales Manager
858.376.6840 office
858.688.0076 mobile
mreza@hawthornecat.com

Phillip J. Smith (PJ)
Field Service Manager
858.376.6874 office
858.688.0134 mobile
psmith@hawthornecat.com

Hawaii – Power
Cliff Yuen
Director of Sales & Rentals
808.676.0322 office
808.349.7767 mobile
cyuen@hawthornecat.com

Guam – Power
Myver Hecita
Power Systems Rental &
Sales Representative
671.649.4241 office
671.898.2740 mobile
mhecita@hawthornecat.com