New | Cat C32 Generator Set (IMO III)

Cat C32 Generator Set, IMO III emissions certified (SCR required)

Generator Set Specifications
Minimum Rating219 ekW
Maximum Rating940 ekW
Frequency60hz
Engine Specifications
Rated Engine Speed1500 rpm
ConfigurationVee-12, 4-stroke-Cycle-Diesel
AspirationTurbocharged-aftercooled aspiration
Bore5.71 in
Stroke6.38 in
Displacement1959 in³
GovernorElectronic (A5 ECM)
EmissionsIMO III emissions certified (SCR required)
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)
Oil Change Interval750 hrs
CoolingHeat exchanger, keel or radiator cooled
GeneratorSR5 - Form Wound
Generator Set Dimensions
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Utilizes Scr Technology To Enable Imo Iii Emission Regulations Compliance While Lowering Operational Costs

Utilizes Closed Loop Air Assisted Def Dosing Control Strategy That Delivers: Highest Efficiency Mixing And Control To Lower Operational Costs; Extends Emissions Useful Life; Ensures Compliance; Flexible To Urea Quality

Enhanced Control Of Fuel Injection Optimized Through Crank Timing And The A5 Ecm Technology

Industry Leading Power Reserve

Wide Range Of Available Marine Society Certifications

Industry-Leading Warranty Coverage For Factory Packaged Components

Global Dealer Network For Service In Any Location

Standard Equipment

AIR INLET SYSTEM
  • Separate circuit aftercooled (SCAC)
  • Closed crankcase fumes disposal
CONTROL SYSTEM
  • 24V control system
COOLING SYSTEM
  • Heat exchanger or Keel Cooling
  • Watercooled exhaust manifold and turbocharger
  • Hard seawater lines – no flexible hoses
  • Flanges for cooling connections, ANSI or DIN
FUEL SYSTEM
  • Primary fuel filter with water separator installed on base frame
  • Duplex fuel filters with hybrid fuel lines
GENERATORS AND GENERATOR ATTACHMENTS
  • IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
LUBE SYSTEM
  • Oil fill, simplex filter and dipstick
MOUNTING SYSTEM
  • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
GENERAL
  • Right or left hand service sides
  • Customer wiring and service tool connector

Optional Equipment

ALARM AND PROTECTION
  • MGCPIIIB control panel with Cat® Alarm and Protection System
  • IP44 generator protection
EXHAUST SYSTEM
  • Muffler
  • Water-in-fuel and exhaust temperature sensors
  • SOLAS approved spray shielding
CHARGING SYSTEM
  • Charging alternator
FUEL SYSTEM
  • Manual or electric fuel priming pump
  • Fuel cooler
LUBE SYSTEM
  • Duplex oil filters
STARTING SYSTEM
  • Starting motors – air, electric or redundant

listofrelationships

original

Other Models in this Category

Select Marine Power System Type


Hawthorne Power Systems Logo

Request a Quote

Why Cat is Better. Machine Comparison

"
With only a few days notice, we were able to get the emergency system working properly. Hawthorne Cat provided great leadership and excellent field support.
Mark Cripe
Helix Electric
"

San Diego - Power
Kyle Farmer
Engine Business Manager
858.376.6821 office
760.715.9565 mobile
kfarmer@hawthornecat.com

Tim Roberts
Product Support
General Manager
858.376.6820 office
858.583.8460 mobile
troberts@hawthornecat.com

Mark Reza
Used Engine Sales Manager
858.376.6840 office
858.688.0076 mobile
mreza@hawthornecat.com

Jeff Reid
Service Manager
858.376.6890 office
858.472.1852 mobile
jreid@hawthornecat.com

Hawaii – Power
Cliff Yuen
Director of Sales & Rentals
808.676.0322 office
808.349.7767 mobile
cyuen@hawthornecat.com

Guam – Power
Myver Hecita
Power Systems Rental &
Sales Representative
671.649.4241 office
671.898.2740 mobile
mhecita@hawthornecat.com