New | M 25 C Marine Generator Set

The complete diesel generator set is notable for its ease of installation, reliable operation, ease of maintenance and good component accessibility. The basis is formed by the rigid base frame as a foundation of the engine and alternator with an integrated oil sump, large oil volume and universal equipment for both HFO and MDO operation. The M 25 C has a wide range of application providing power for the continuous generation of electricity where a high level of reliability is important. The power range of the M 25 C engine series as a generator unit varies from 2,140 to 3,560 kVA.

Generator Set Specifications
Minimum Rating1669 kWe (2088 kVA)
Maximum Rating2877 kWe (3600 kVA)
Emissions/Fuel StrategyIMO II
Engine Specifications
Configuration6,8,9 Cylinder
Bore10 in
Stroke15.75 in
Swept Volume1244.88 in³
Generator Set Dimensions and Weights - Dependent on Generator Type
Width2479 mm - 2534 mm ( 97.6 in - 99.8 in)
Length8070 mm - 9516 mm (317.7 in - 374.6 in)
Height3911 mm - 3963 mm (154.0 in - 156.0 in)
Weight43 t - 56 t (94799 lbs - 123459 lbs)

This Mak Design Principles Is Most Clearly Reflected In The Reduction In The Number Of Components. About 40 % Of Parts Have Been Dispended. It Has Resulted In A Marked Gain In Operational Reliability And A Reduction In Operating Costs.

The Complete Diesel Engine Is Notable For Its Ease Of Installation, Reliable Operation, Ease Of Maintenance And Good Component Accessibility.

In Addition To Many Outstanding Technical Features, The Long-Stroke M 25 C Engine Is Also Easy To Install And Provides Good Maintenance Access To All Components.

The Supply Of Complete Propulsion Systems Is A Market Requirement Which Is Becoming Increasingly Important.

System responsibility and supply from a single source, accurately matched interfaces and coordinated delivery data control

Standard Equipment

Air Inlet System
  • Air intake silencer / filter
Control System
  • Load sharing unit (for multiple engine plant only)
  • Protection system
  • Serial link interface (MODbus / canbus)
  • Speed governor
Cooling System
  • Electric cooling water preheater
  • HT cooling water pump (engine driven)
  • 2-stage charge air cooler
Exhaust System
  • Exhaust gas expansion joint
  • Exhaust gas insulated manifolds
  • Turbocharger at counter-flywheel end
Fuel System
  • Fuel circulating pump (attached / for MDO/MGO only)
  • Fuel indicator filter
  • Fuel pressure valve (fitted / for MDO/MGO only)
  • Control push buttons and lamps
  • Emergency stop lever
  • Local control panel
  • Pressure and temperature indicator
Lube System
  • Lube oil cooler (separate)
  • Lube oil pump (engine driven)
  • Lube oil self-cleaning filter
  • Pre-lubricating pump (electric driven / fitted on base frame)
  • Oil sump in base frame
  • Pressure regulating valve
Mounting System
  • Flexible pipe connections
  • High flexible coupling
  • Resilient mounting on base frame
Starting System
  • Electrical barring device
  • Starting air valve
  • Engine, flex. coupling and generator mounted on a common base frame
  • Flywheel cover
  • Lifting device (rental)
  • Torsional Vibration Calculation (TVC)

Optional Equipment

Air Inlet System
  • Air inlet shut-off valve
  • Air intake transition piece
  • Expansion joint
  • Silencer / filter
Control System
  • Air injection control (for better load request)
  • Electronic speed governor
  • Engine alarm system
  • Remote indicators (start air pressure, engine speed, etc.)
  • Starter for electric driven pumps
  • 24 DC UPS
Cooling System
  • CW piping for generator cooliing on base frame
  • CW piping for lubricating oil cooler on base frame
  • FW/SW plate cooler
  • HT cooling water pump (electric driven)
  • HT temperature control valve fitted on base frame
  • LT cooling water pump (electric driven)
  • Sea water cooling pump (electric driven)
  • Temperature control valve
Exhaust System
  • Silencer (with or without spark arrester)
Fuel System
  • Fuel oil cooler
  • HFO final preheater
  • HFO pressure regulating valve
  • HFO self-cleaning automatic filter
  • HFO supply and booster pumps (electric driven)
  • HFO treatment and supply modules
  • HFO viscosity control device
  • Mixing tank
Lube System
  • Lube oil centrifuge
  • Lube oil cooler fitted on base frame
  • Lube oil pump (electrical driven)
  • Lube oil treatment and combined modules
  • Temperature control valve fitted on base frame
Mounting System
  • Double resilient mounting (engine and base frame)
Starting System
  • Starting air compressor
  • Starting air receiver
  • Engine PTO coupling
  • Generator customer supply
  • PTO shaft on counter-flywheel side



Other Models in this Category

Select Marine Power System Type

Hawthorne Power Systems Logo

Request a Quote

Why Cat is Better. Machine Comparison

With only a few days notice, we were able to get the emergency system working properly. Hawthorne Cat provided great leadership and excellent field support.
Mark Cripe
Helix Electric

San Diego - Power
Kyle Farmer
Engine Business Manager
858.376.6821 office
760.715.9565 mobile

Tim Roberts
Product Support
General Manager
858.376.6820 office
858.583.8460 mobile

Mark Reza
Used Engine Sales Manager
858.376.6840 office
858.688.0076 mobile

Jeff Reid
Service Manager
858.376.6890 office
858.472.1852 mobile

Hawaii – Power
Cliff Yuen
Director of Sales & Rentals
808.676.0322 office
808.349.7767 mobile

Guam – Power
Myver Hecita
Power Systems Rental &
Sales Representative
671.649.4241 office
671.898.2740 mobile