In-stock Inventory

CAT 930

Serial #: 0F3S01739

Our Price

Year: 2025

Manufacturer: CAT

Model: 930

Product Family:

Wheel Loaders

Unit #: H19371

Location: RANCHO BERNARDO, CA

Specs

CHASSIS AR-930
ELECTRICAL AR
HYDRAULIC AR
POWER TRAIN AR
INSTALLATION AR
ELECTRONICS AR-M
LANE 2 ORDER
PREP PACK, UNITED STATES
STANDARD LIFT, PIN ON
HYDRAULICS, 2V
HYDRAULICS, STANDARD
STEERING WHEEL, STANDARD
JOYSTICK 2V, STEERING WHEEL
DIFFERENTIAL, OPEN REAR
ENVIRONMENT, STANDARD
WEATHER, STANDARD
CAB, STANDARD
AIR CONDITIONING, R134A REF
ENGINE
PUSH START, PASSCODE SECURITY
CAMERA, REAR VIEW
MIRROR, BASE
SEAT, STANDARD, TILT ONLY
LIGHTS, STD, HALOGEN
LIGHTS, ROADING, HALOGEN, RH
RADIO, READY (SPEAKER/ANTENNA)
PRODUCT LINK, CELLULAR PLE643
FILM GP, WARNING, PL, ANSI
WINDSHIELD ACCESS STEPS, NONE
TIRES, 20.5R25 MA MS301 ** L3
FENDERS, STANDARD
CTWT, HEAVY, 2668LBS, 5PCS
TOOLBOX AUX, NONE
HYDRAULIC OIL, STANDARD
SERIALIZED TECHNICAL MEDIA KIT
LINES, AUX 3RD, NONE
PACK, DOMESTIC TRUCK
TRANSPORT GROUP
JUMPER LINES, NONE

Equipment Features

- - 75 mm (3 in) retractable seatbelt
- - Automatic temperature control
- - Cab, enclosed ROPS/FOPS pressurized and sound suppressed
- - Push to Start
- - 8 Inch Touch Screen
- - Jog Dial with screen control
- - Programmable Joystick
- - Cup holders
- - External mirrors with lower parabolic
- - Ground level cab door release
- - Hydraulic control lockout
- - Interior cab lighting, door
- - Lunch box storage
- - Operator Not Present system
- - Radio ready speakers
- - Rear window defrost, electric
- - Seat mounted electronic implement controls, adjustable
- - Sliding glass on side window
- - Column mounted multi function control lights, wipers, turn signal
- - Suspension seat, fabric
- - Tilt steering wheel
- - Tinted front glass
- - Wet arm wiper/washer, 2-speed and intermittent, front
- - Wet arm wiper washer, rear
- - Mounting Provision
- - Digital hour meter, odometer and tachometer
- - Digital ground speedometer and direction indicator
- - Engine coolant temperature gauge
- - Fuel and diesel exhaust fluid levels
- - Hydraulic oil temperature gauge
- - Cat C7.1 engine
- - Auto idle shut down feature
- - Auto Engine RPM
- - Tier 4 Final/EU Stage V compliant
- - Turbocharged and aftercooled
- - Filtered crankcase breather
- - Diesel particulate filter
- - Selective catalyst reduction
- - Dry type air cleaner
- - Coolant protection to –34 °C (–29 °F)
- - Fuel priming pump, automatic
- - Fuel water separator
- - Differential lock in front axle
- - Axle seal guards
- - Enclosed wet disc full hydraulic brakes
- - Parking brake, electric
- - Lubed for life driveshafts
- - Hydrostatic transmission with electronic control
- - Operator modes (TC, Hystat, Single Pedal and Ice)
- - Directional shift aggressiveness (fast, medium, slow)
- - Auto Wheel Torque control, adjust wheel torque
- - Creeper control, adjust ground speed
- - Single plane cooling package, wide 6 fins per inch density
- - Hydraulically driven demand cooling fan
- - Scheduled Oil Sampling (S·O·SSM) port, engine, coolant, transmission
- - Automatic lift and bucket kickouts, adjustable in-cab
- - Bucket and fork modes, adjustable in-cab
- - Cylinder damping at kickout and mechanical end stops
- - Fine mode control (fast, medium, slow)
- - Hydraulic response setting (fast, medium, slow)
- - Hydraulic diagnostic connectors and S·O·S ports
- - Hydraulic sight gauge, visible
- - Load sensing hydraulics and steering
- - Seat mounted hydraulic joystick controls
- - Cat Payload
- - Alternator, 115-amp, heavy duty
- - 12V power supply in cab (2)
- - Batteries, 1,000 CCA (2) 24-volt system, disconnect switch
- - Back up alarm
- - Emergency shutdown switch
- - LED rear stop and turn lights
- - Heavy duty gear reduction starter
- - Product Link™ Elite
- - Remote jump start post
- - Resettable main and critical function breakers
- - Roading lights front and rear
- - Large-access enclosure doors with adjustable close/open force
- - Parallel lift loader linkage
- - Recovery hitch with pin
- - Remote mounted lubrication points
- - Lockable compartments
- - 1000-hour Service Intervals (after initial 500)

Specs

- - ROPS
  - , ISO 3471:2008
- - FOPS
  - , ISO 3449:2005 LEVEL II
- - Front
  - , Fixed; Locking differential (standard)
- - Rear
  - , Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)
- - Operator Sound Pressure (ISO 6396:2008)
  - , 68 dB(A)
- - Average Exterior Sound Pressure (ISO 6395:2008)
  - , 101 dB(A)
- - Note (1)
  - , European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
- - Standard Size
  - , 20.5 R25, radial (L-3)
- - Other Choices Include
  - , 20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture
- - Note (1)
  - , Other tire choices are available. Contact your Cat dealer for details.
- - Note (2)
  - , In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
- - Note (3)
  - , Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
- - Rated Gross Power - SAE J1995
  - , 170 hp
- - Engine Model
  - , Cat C7.1*
- - Performance Mode
  - , Automatic
- - Rated Gross Power - Rated Engine Speed
  - , 1800 r/min
- - Rated Gross Power - SAE J1995 (DIN)
  - , 172 mhp
- - Rated Engine Power - ISO 14396
  - , 168 hp
- - Rated Engine Power - ISO 14396 (DIN)
  - , 170 mhp
- - Rated Net Power - SAE J1349 at Minimum Fan Speed
  - , 165 hp
- - Rated Net Power - ISO 9249 at Minimum Fan Speed
  - , 165 hp
- - Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed
  - , 167 mhp
- - Maximum Gross Torque - Engine Speed
  - , 1400 r/min
- - Maximum Gross Torque - SAE J1995
  - , 608 ft·lbf
- - Maximum Gross Torque - ISO 14396
  - , 601 ft·lbf
- - Maximum Net Torque - SAE J1349
  - , 593 ft·lbf
- - Maximum Net Torque - ISO 9249
  - , 595 ft·lbf
- - Displacement
  - , 427 in³
- - Bore
  - , 4 in
- - Stroke
  - , 5 in
- - Note
  - , *Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.
- - Note (1)
  - , Advertised power is tested per the specified standard in effect at the time of manufacture
- - Note (2)
  - , Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
- - Note (3)
  - , No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
- - Operating Weight
  - , 31124 lb
- - Operating Weight - High Lift
  - , 31633 lb
- - Steering Cylinder - Bore Diameter
  - , 2.8 in
- - Steering Cylinder - Rod Diameter
  - , 1.6 in
- - Steering Cylinder - Stroke
  - , 17.2 in
- - Maximum Flow - Steering Pump
  - , 34 gpm
- - Maximum Working Pressure - Steering Pump
  - , 3500 psi
- - Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited
  - , 2.8 s
- - Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed
  - , 2.4 s
- - Forward and Reverse - Range 1*
  - , 1-13 km/h (0.6-8 mph)
- - Forward and Reverse - Range 2
  - , 8 mile/h
- - Forward and Reverse - Range 3
  - , 17 mile/h
- - Forward and Reverse - Range 4
  - , 25 mile/h
- - Note
  - , *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
- - Maximum Flow - Implement Pump
  - , 50 gpm
- - Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
  - , 50 gpm
- - Maximum Flow - Implement Pump - 4th Function Maximum Flow*
  - , 42 gpm
- - Maximum Working Pressure - Implement Pump
  - , 3771 psi
- - Relief Pressure - Tilt Cylinder
  - , 4061 psi
- - Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
  - , 3771 psi
- - Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
  - , 4061 psi
- - Lift Cylinder: Standard Lift Linkage - Bore Diameter
  - , 4.7 in
- - Lift Cylinder: Standard Lift Linkage - Rod Diameter
  - , 2.6 in
- - Lift Cylinder: Standard Lift Linkage - Stroke
  - , 28.7 in
- - Tilt Cylinder: Standard Lift Linkage - Bore Diameter
  - , 5.9 in
- - Tilt Cylinder: Standard Lift Linkage - Rod Diameter
  - , 3.5 in
- - Tilt Cylinder: Standard Lift Linkage - Stroke
  - , 21.9 in
- - Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
  - , 5.1 s
- - Hydraulic Cycle Time - Dump (at Maximum Lift Height)
  - , 1.5 s
- - Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
  - , 2.7 s
- - Hydraulic Cycle Time - Total Cycle Time
  - , 9.3 s
- - Note
  - , *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
- - Fuel Tank
  - , 51.5 gal (US)
- - Cooling System
  - , 7.9 gal (US)
- - Engine Crankcase
  - , 5.3 gal (US)
- - Transmission - Gear Box
  - , 2.2 gal (US)
- - Front Axles
  - , 6.9 gal (US)
- - Rear Axles
  - , 6.6 gal (US)
- - Hydraulic System - Including Tank
  - , 43.6 gal (US)
- - Hydraulic Tank
  - , 23.8 gal (US)
- - Diesel Exhaust Fluid (DEF) Tank
  - , 5 gal (US)
- - Note
  - , DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.
- - Height - Ground to Cab**
  - , 10.92 ft
- - Height - Ground to Beacon**
  - , 12.17 ft
- - Height - Ground to Axle Center**
  - , 2.25 ft
- - Height - Ground Clearance**
  - , 1.33 ft
- - Length - Overall*
  - , 27.3 ft
- - Length - Rear Axle to Bumper
  - , 6.5 ft
- - Length - Hitch to Front Axle
  - , 4.92 ft
- - Length - Wheel Base
  - , 9.83 ft
- - Clearance - Bucket at 45°*
  - , 11.25 ft
- - Clearance - Load over Height**
  - , 11.58 ft
- - Clearance - Level Bucket**
  - , 13.67 ft
- - Height - Bucket Pin**
  - , 14.75 ft
- - Height - Overall**
  - , 18.83 ft
- - Reach - Bucket at 45°*
  - , 4.58 ft
- - Carry Height - Bucket Pin
  - , 2.08 ft
- - Dig Depth**
  - , 5.3 in
- - Width - Bucket
  - , 8.33 ft
- - Width - Tread Center
  - , 6.33 ft
- - Turning Radius - Over Bucket
  - , 20.75 ft
- - Width - Over Tires
  - , 8.33 ft
- - Turning Radius - Outside of Tires
  - , 17.75 ft
- - Turning Radius - Inside of Tires
  - , 9.33 ft
- - Rack Angle at Full Lift
  - , 53 °
- - Dump Angle at Full Lift
  - , 48 °
- - Rack Angle at Carry
  - , 49 °
- - Departure Angle
  - , 33 °
- - Articulation Angle
  - , 40 °
- - Operating Weight
  - , 31633 lb
- - Note (1)
  - , *Vary with bucket.
- - Note (2)
  - , **Vary with tire.
- - Note (3)
  - , Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.
- - Height - Ground to Cab**
  - , 10.92 ft
- - Height - Ground to Beacon**
  - , 12.17 ft
- - Height - Ground to Axle Center**
  - , 2.25 ft
- - Height - Ground Clearance**
  - , 1.33 ft
- - Length - Overall*
  - , 24.67 ft
- - Length - Rear Axle to Bumper
  - , 6.5 ft
- - Length - Hitch to Front Axle
  - , 4.92 ft
- - Length - Wheel Base
  - , 9.83 ft
- - Clearance - Bucket at 45°*
  - , 9.25 ft
- - Clearance - Load over Height**
  - , 10.9 ft
- - Clearance - Level Bucket**
  - , 11.75 ft
- - Height - Bucket Pin**
  - , 12.83 ft
- - Height - Overall**
  - , 16.9 ft
- - Reach - Bucket at 45°*
  - , 3.5 ft
- - Carry Height - Bucket Pin
  - , 1.25 ft
- - Dig Depth**
  - , 3.9 in
- - Width - Bucket
  - , 8.33 ft
- - Width - Tread Center
  - , 6.33 ft
- - Turning Radius - Over Bucket
  - , 19.5 ft
- - Width - Over Tires
  - , 8.33 ft
- - Turning Radius - Outside of Tires
  - , 17.75 ft
- - Turning Radius - Inside of Tires
  - , 9.33 ft
- - Rack Angle at Full Lift
  - , 54 °
- - Dump Angle at Full Lift
  - , 49 °
- - Rack Angle at Carry
  - , 43 °
- - Departure Angle
  - , 33 °
- - Articulation Angle
  - , 40 °
- - Operating Weight
  - , 31124 lb
- - Note (1)
  - , *Vary with bucket.
- - Note (2)
  - , **Vary with tire.
- - Note (3)
  - , Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.

Optional Equipment

- - Joystick steering – 25 mph (40 kph) capable
- - Radio packages
- - Telescoping Steering Column
- - Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
- - Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- - Rear Object Detection
- - Multi View Camera
- - Front View Camera, roof mounted
- - Heated external Mirrors (2)
- - Electrically adjustable and heated external mirrors (2)
- - Internal Mirrors (2)
- - Sunscreen, front and rear
- - Windshield Washing Platform
- - Powered precleaned for cab air
- - Cab guarding
- - Differential, limited slip, rear
- - Powertrain Guarding
- - Tire Pressure Monitoring (TPM)
- - Range of Tire Options
- - Fenders (extended cover and full coverage)
- - Auxiliary flow, third and fourth function
- - Connect Under Pressure Disconnects
- - Ride Control System, adjustable via display
- - Autolube, integrated in display
- - Biodegradable Oil
- - Debris packages (low, medium, high)
- - Cold start package
- - Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- - Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- - Beacon light, strobe
- - Light Guarding
- - Linkage, high lift
- - Coupler, (Fusion and ISO 23727:2009)
- - Heavy Counterweight
- - Aggregate Counterweight
- - Cat Payload Printer
- - Cylinder Guarding
- - Range of Work Tool Attachments

CAT 930

Specs

Equipment Features

NOTE: Not all features are available in all regions.

OPERATOR ENVIRONMENT

POWER TRAIN

HYDRAULICS

ELECTRICAL

OTHER

Specs

Cab

Axles

Sound

Tires

Engine

Buckets

Weights

Steering

Transmission

Sustainability

Air Conditioning System

Loader Hydraulic System

Service Refill Capacities

Dimensions with Bucket - High Lift

Dimensions with Bucket - Standard Lift

Optional Equipment

NOTE: Not all features are available in all regions.

OPERATOR ENVIRONMENT

POWER TRAIN

HYDRAULICS

ELECTRICAL

OTHER OPTIONAL EQUIPMENT

Downloads

Let us help you find what you are looking for.