Attachment

2134 mm (84 in) Construction Fork Carriage

For use in heavy duty applications where standard pallet fork carriages may not be suitable.

Cat® Construction Fork Carriages for Small Wheel Loaders are wider than pallet fork carriages and are designed for heavy duty applications. Fork tines can be configured to allow tines to either swing or stay in a fixed position.

Equipment Highlights

Heavy Duty Design and High Backs

This heavy duty carriage was specially designed to deliver performance at construction sites, moving palletized and large materials around. The high backs and good visibility through the frame make it happen.

Swinging Forks Capability

In some operations, swinging forks helps to pick materials out of the ground. This carriage offers this option by just removing the lower bar and placing at the special storage located at the bottom of the carriage.

Adjustable Fork Positions

Adjust the fork position a total of 855 mm (33.7 in) from one side to the other with increments of 55 mm (2.2 in) and lock them to prevent non-expected movements.

Positioning Lever

Use the included red lever located at the right rear storage area to move your forks with safety and convenience.

Specs + Downloads

Specs

Width: 84 in

Height: 43.1 in

Length: 14.4 in

Weight: 1148.6 lb

Tine Spacing: 270-1924 mm (10.6-76 in) centerline to centerline

Interface Type: Fusion™ Coupler