Attachment

TRS4 Pin On (Pin Grabber Coupler)/S40 Coupler Tiltrotator For 3-4 Ton Mini Excavators

Cat® Tiltrotators help you maneuver obstacles in your work area without the need for repositioning your machine.

Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.

Equipment Highlights

Complete 360 Degree Rotation
Provides optimal control of your work tools to provide greater flexibility.
Integrated Central Lubrication System
A single point of entry for grease allows the entire unit to be greased quickly and easily.
Optional Grapple Module
Used to pick up objects such as pipe and debris.
Oil Filled Gearbox
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Heavy Duty Worm Gear
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Double Acting Cylinder with Load Hold Valve
Valves sustain holding pressures and prevent cylinder movement under load constraints.
Visual Verification Indicator
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
Locking Control System (LCS)
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.

Video Library

Specs + Downloads

Specs
Length19.2 in
Weight264.6 lb
CompatibilityOnly compatible with the following Mini Excavator model serial number prefixes: 303 (MY3 1 & up) | 303.5 (CE9 1 & up) | 304 (AN4 1 & up)
Machine Class3-4 Ton Mini Excavator
Overall Width15 in
Overall Height27.6 in
Rotation Speed7 Seconds per 1 full rotation
Tilting Torque4277.9 lb/ft
Turning Torque1253.9 lb/ft
Tilt Angle Range40° Left/Right
Required Hydraulics1st Auxiliary
Maximum Bucket Width39.4 in
Optimal Hydraulic Flow17-25 L/min (4.5-6.7 gpm)
Maximum Bucket Capacity3.9 ft³
Maximum Operating Pressure3045.8 psi
Interface Options: Top-BottomPin On (Pin Grabber Coupler) / S40 Coupler
Downloads

    Photo Gallery

    Let us help you find what you are looking for.