Engine Power - 1,700 rpm ISO 14396:2002420 hp
Engine Power - 1,700 rpm ISO 14396:2002426 hp (metric)
Engine ModelCat® C13
Gross Power - 1,700 rpm SAE J1995:2014425 hp
Gross Power - 1,700 rpm SAE J1995:2014431 hp (metric)
Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011393 kW
Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011398 hp (metric)
Engine Torque - 1,200 rpm ISO 14396:20021612 lbf·ft
Gross Torque - 1,200 rpm SAE J1995:20141627 hp
Net Torque - 1,100 rpm ISO 9249:2007, SAE J1349:20111539 lbf·ft
Displacement763 in³
EmissionsMeets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Biodiesel CapabilityUp to B20¹
Note (1)The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to:
20% biodiesel FAME (fatty acid methyl ester)
***100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application.
Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details.
*While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use.
**Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
***Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Gross Torque @ 1,200 rpm – SAE J1995:20141627 lb/ft
Engine Torque @ 1,200 rpm – ISO 14396:20021612 lb/ft
Engine Power @ 1,700 rpm – ISO 14396:2002420 hp
Gross Power @ 1,700 rpm – SAE J1995:2014425 hp
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:20111539 lb/ft
Note (3)Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.