Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
Backup Alarm
Heavy Duty Battery, 850 CCA
Gauges: Fuel Level, Hour Meter
Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged
Adjustable Vinyl Seat
Fold In Ergonomic Contoured Armrest
Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
ROPS Cab, Open, Tilt Up
FOPS, Level I
Top and Rear Windows
Floor Mat
Interior Rearview Mirror
12 volt Electric Socket
Horn
Hand (Dial) Throttle, Electronic
Adjustable Joystick Controls
Anti-theft Security System with 6-button Keypad
Storage Compartment with Netting
Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
Spring Applied, Hydraulically Released Parking Brakes
Hydrostatic Transmission, Two Speed Travel
Suspension – Independent Torsion Axles (4)
Engine Enclosure, Lockable
Extended Life Antifreeze, –36° C (–33° F)
Machine Tie Down Points (6)
Support, Lift Arm
Hydraulic Oil Level Sight Gauge
Radiator Coolant Level Sight Gauge
Radiator, Expansion Bottle
Cat ToughGuard™ Hose
Auxiliary, Hydraulics, Continuous Flow
Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
Electrical Outlet, Beacon
Belly Pan Cleanout
Variable Speed Demand Fan
Product Link™ PL240, Cellular
Hydraulics, Standard or High Flow
Quick Coupler, Mechanical or Powered
High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)
EU Preparation Package (Europe only)
Steel Imbed Rubber Track – 320 mm (12.6 in) Block Tread or 400 mm (15.7 in) Bar Tread
Dual Flange Front Idler/Single Flange Rear Idler
PERFORMANCE PACKAGES: – Performance Package H1: Standard Flow Hydraulics (No Self Level) – Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) – Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
COMFORT PACKAGES – Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door) – Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door) – Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate) – Enclosed ROPS with A/C (C3): C2 + Air Conditioner
Specs
ROPS
, ISO 3471:2008
FOPS
, ISO 3449:2005 Level I
Gross Power - SAE J1995:2014
, 67.1 hp
Displacement
, 134.3 in³
Bore
, 3.3 in
Stroke
, 3.9 in
Net Power - ISO 9249
, 66.5 hp
Net Power
, 65.8 hp
Net Power - SAE 1349
, 65.8 hp
Peak Torque - 1,500 rpm - SAE J1995
, 153 ft·lbf
Engine Model
, Cat C2.2 CRDI
Operating Weight
, 7831 lb
Note
, Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Length - Track on Ground
, 54.5 in
Overall Length - Track
, 71.2 in
Height - Top of Cab
, 80.3 in
Ground Clearance
, 7.6 in
Departure Angle
, 34.5°
Maximum Dump Angle
, 48°
Vehicle Width (400 mm/15.7 in tracks)
, 69.1 in
Length - With Bucket on Ground
, 127.3 in
Maximum Overall Height
, 150.8 in
Bucket Pin Height - Carry Position
, 8.6 in
Maximum Reach - With Arms Parallel to Ground
, 51.8 in
Length - Without Bucket
, 99.3 in
Turning Radius from Center - Machine Rear
, 57.4 in
Bucket Pin Height - Maximum Lift
, 118.2 in
Clearance at Maximum Lift and Dump
, 88.7 in
Vehicle Width (320 mm/12.6 in tracks)
, 66 in
Turning Radius from Center - Coupler
, 45.7 in
Reach - Maximum Lift/Dump
, 28.6 in
Rack Back Angle - Maximum Height
, 87.5°
Turning Radius from Center - Bucket
, 81.1 in
Note
, Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Bucket Pin Reach - Maximum Lift
, 12.2 in
Outside Cab***
, 103 dB(A)
Inside Cab**
, 83 dB(A)
Note (3)
, ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (2)
, **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)
, Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Travel Speed - Forward or Reverse - One Speed
, 5 mile/h
Travel Speed - Forward or Reverse - Two Speed
, 7.6 mile/h
Hydraulic Flow - Standard - Loader Hydraulic Pressure
, 3336 psi
Hydraulic Flow - High Flow - Loader Hydraulic Flow
, 26 gpm
Hydraulic Flow - High Flow - Loader Hydraulic Pressure
, 3336 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
, 50.9 hp
Hydraulic Flow - Standard - Loader Hydraulic Flow
, 18 gpm
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
, 35.5 hp
Rated Operating Capacities - 35% Tipping Load
, 1740 lb
Tipping Load
, 4970 lb
Breakout Force - Tilt Cylinder
, 3907 lb
Ground Contact Area - With 320 mm/12.6 in Track
, 1373 in²
Ground Pressure - With 320 mm/12.6 in Track
, 5.7 psi
Ground Contact Area - With 400 mm/15.7 in Track
, 1716 in²
Ground Pressure - With 400 mm/15.7 in Track
, 4.7 psi
Rated Operating Capacities - 50% Tipping Load
, 2485 lb
Note
, Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 cab (OROPS, static seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight
, 2700 lb
Engine Crankcase
, 2.6 gal (US)
Fuel Tank
, 15.1 gal (US)
Hydraulic System
, 11.9 gal (US)
Cooling System
, 3.2 gal (US)
Hydraulic Tank
, 9 gal (US)
Air Conditioning, The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
