Automatic Work light notification flash when parking brake is released
Full color LCD monitor: Creep speed control, Drive response adjustment, Implement response adjustment, Drive Power Priority adjustment, Language selection (×32), Multi-operator Anti-theft Security System and Monitoring, Maintenance schedule and reminders, Event and Diagnostic Code monitoring, Date /Time/Units/Brightness settings, and Smart Technology for use with Smart Attachments.
Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System (where applicable)
Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
ROPS Cab, Tilt Up
FOPS, Level I
Top and Rear Windows
Floor Mat
Headliner
Interior Rearview Mirror
Horn
Hand (Dial) Throttle, Electronic
Seat Mounted Joystick Controls
Cell Phone Storage Pocket
Cup Holder
12-volt power port
Foot Throttle
Selectable control pattern – ISO or H
Electro/hydraulic implement control
Electro/hydraulic hydrostatic transmission control Speed sensor guarding
Heavy duty flat faced quick disconnects with integrated pressure release lever
Hydraulic oil level sight gauge
Cat C2.8T turbocharged diesel engine, Meeting U.S. EPA Tier 4 Final and EU Stage V emission standards
Spring applied, hydraulically released, parking brakes
Hydrostatic transmission
Lockable fuel cap
Hydraulic demand cooling fan
Auto engine idle
Auxiliary Hydraulics, Continuous Flow
Telematics, Product Link, Cellular
Steel engine door with replaceable louvers
Engine door – lockable
Work tool attachment coupler
Cat ToughGuard™ hose
Auxiliary Hydraulics: Standard or High Flow XPS
Quick Coupler: Mechanical or Hydraulic
High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), or 3-point lap/shoulder
Tires: 10 x 16.5 or 12 x 16.5
Axles: Standard or Special Application
Performance Package HP1: Standard Flow Hydraulics
Performance Package HP3: High Flow XPS Hydraulics
Open canopy: Cup Holder, Cell Phone Pocket, choice of vinyl seat (Mechanical Suspension, High Back/Heated/Air Ride Seat
Enclosed Cab with heat and air conditioning: Side Windows, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated and Heated Air Ride Seat) and Door choice (Glass or Polycarbonate)
T2 – T1 + Rear-view camera.
T4 – Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
T5 – T4 + 2 additional side view cameras.
Radio, none – for open canopy machines and countries not certified for Bluetooth® technology
Integrated AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm Auxiliary (AUX) input, and Bluetooth microphone. Only for use with enclosed cab. Availability varies by country.
Integrated DAB+/AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm AUX input, and Bluetooth microphone. Only for use with enclosed cab. Availability varies by country.
Product Link Basic series PL243
Product Link Elite series PLE643
On-demand, variable speed hydraulic cooling fan
On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
HD0 – base guarding and sealing (engine air inlet rain cap, front cab-toframe sealing, and hydraulic fill access door)
HD1– intermediate guarding and sealing (HD0 + cab-to-frame side sealing, lockable fuel fill access door, tilt cylinder guarding, and drive line bottom guarding. Some equipment varies by region)
HD2 – most comprehensive guarding and sealing (HD1 + turbo guard, exhaust stack wrap, Diesel Particulate Filter (DPF) wrap, quick disconnect guarding, fully enclosed drive line guarding, under step hydraulic lines guard cover, engine air inlet pre-cleaner. Some equipment varies by region
Specs
ROPS
, ISO 3471:2008
FOPS
, ISO 3449:2005 Level I
FOPS Level II
, ISO 3449:2005 (Optional)
Gross Power - SAE J1995:2014
, 74 hp
Net Power - SAE 1349
, 73 hp
Net Power - ISO 9249
, 73 hp
Engine Model
, Cat C2.8T (turbo)
Displacement
, 171 in³
Stroke
, 4.3 in
Bore
, 3.5 in
Peak Torque - 1,600 rpm - SAE J1995
, 221 lb/ft
Note
, Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Operating Weight
, 7829 lb
Note
, Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Wheel Base
, 43.1 in
Height - Top of Cab
, 81.9 in
Vehicle Width over Tires
, 66 in
Ground Clearance
, 7.7 in
Departure Angle
, 23°
Maximum Dump Angle
, 46°
Bucket Pin Height - Carry Position
, 7.9 in
Bucket Pin Height - Maximum Lift
, 124 in
Bucket Pin Reach - Maximum Lift
, 3 in
Clearance at Maximum Lift and Dump
, 96.2 in
Length - With Bucket on Ground
, 135 in
Length - Without Bucket
, 110.2 in
Maximum Overall Height
, 155.8 in
Maximum Reach - With Arms Parallel to Ground
, 32.8 in
Rack Back Angle - Maximum Height
, 97°
Reach - Maximum Lift/Dump
, 17.6 in
Roll Back Angle
, 28°
Turning Radius from Center - Bucket
, 79.7 in
Turning Radius from Center - Coupler
, 51 in
Turning Radius from Center - Machine Rear
, 64.9 in
Note
, Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Inside Cab*
, 83 dB(A)
Note (1)
, Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
, *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
, **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**
, 101 dB(A)
Travel Speed - Forward or Reverse - One Speed
, 8 mile/h
Travel Speed - Forward or Reverse - Two Speed Option
, 10.5 mile/h
Recyclability, 94%
Hydraulic Flow - Standard - Loader Hydraulic Pressure
, 3500 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow
, 20 gpm
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
, 46.4 hp
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
, 3500 psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
, 30 gpm
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
, 60.9 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
, 4061 psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
, 30 gpm
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
, 71 hp
Rated Operating Capacity
, 2689 lb
Tipping Load
, 5378 lb
Breakout Force - Tilt Cylinder
, 6784 lb
Breakout Force - Lift Cylinder
, 5948 lb
Rated Operating Capacity with Optional Counterweight
, 2912 lb
Note
, Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
