, The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2)
, The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1)
, Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
, *The measurements were conducted with the cab doors and windows closed.
, Other tire choices are available. Contact your Cat dealer for details.
Note (3)
, Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)
, In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Maximum Gross Power
, 121 hp
Rated Net Power - Rated Engine Speed
, 2200 r/min
Maximum Gross Power - Rated Engine Speed
, 2200 r/min
Rated Net Power - SAE J1349
, 120 hp
Maximum Gross Power - ISO 14396 (metric)
, 122 hp
Rated Net Power - ISO 9249
, 118 hp
Maximum Gross Torque - SAE J1995
, 372 ft·lbf
Maximum Gross Torque - ISO 14396
, 369 ft·lbf
Maximum Net Torque - SAE J1349
, 366 ft·lbf
Maximum Net Torque - ISO 9249
, 363 ft·lbf
Displacement
, 220 in³
Bore
, 3.85 in
Stroke
, 4.72 in
Engine Model
, Cat C3.6
Emissions
, Engine meets Tier 4 Final/Stage V emission standards.
Note
, Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
, 121 hp
Bucket Capacities
, 1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
, 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
, 2.5-3.5 m³ (3.3-4.6 yd³)
Operating Weight, 21742 lb
Maximum Working Pressure - Steering Pump
, 3190 psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
, 2.3 s
Steering Articulation Angle - Each Direction
, 40 °
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
, 3.4 turns
Maximum Flow - Steering Pump
, 21.7 gpm
Note
, *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
, 25 mile/h
Forward and Reverse - Speed Range 2*
, 12.5 mile/h
Forward and Reverse - Speed Range 1*
, 6.3 mile/h
Recyclability, 95%
Relief Pressure - Tilt Cylinder
, 4641 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
, 25 gpm
Maximum Flow - Implement Pump
, 43.6 gpm
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
, 4641 psi
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
, 2.7 s
Note
, All cycle times listed are with cylinder snubbing turned off.
Maximum Working Pressure - Implement Pump
, 4061 psi
Hydraulic Cycle Time - Total Cycle Time
, 11.5 s
Hydraulic Cycle Time - Rackback
, 2.2 s
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
, 25 gpm
Hydraulic Cycle Time - Dump, at Maximum Reach
, 1.8 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
, 4.8 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
, 40 gpm
Transmission
, 0.8 gal (US)
Engine Crankcase
, 2.6 gal (US)
Diesel Exhaust Fluid (DEF) Tank
, 4.8 gal (US)
Axles - Rear
, 4.5 gal (US)
Cooling System
, 5.7 gal (US)
Hydraulic System - Including Tank
, 25.9 gal (US)
Axles - Front
, 4.5 gal (US)
Fuel Tank
, 43.6 gal (US)
Hydraulic Tank
, 14.5 gal (US)
Note
, DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
