Controls help and eOMM (Not available in all languages)
Cat Payload
Key Features Inform
Bucket Carry Display Widget
Remote Flash
Seat belt reminder
2-point seat belt
Rear vision camera
Window cleaning platform, front
Specs
Operator Sound Pressure Level - ISO 6396:2008
, 72 dB(A)
Exterior Sound Power Level - ISO 6395:2008
, 112 dB(A)
Operator Sound Pressure Level - ISO 6396:2008 ¹
, 72 dB(A)
Exterior Sound Power Level - ISO 6395:2008²
, 109 dB(A)
Note (1)
, ¹Including countries that adopt the EU and UK Directives.
Note (2)
, ²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
Engine Power - 1,700 rpm ISO 14396:2002
, 420 hp
Engine Power - 1,700 rpm ISO 14396:2002
, 426 hp (metric)
Engine Model
, Cat® C13
Gross Power - 1,700 rpm SAE J1995:2014
, 425 hp
Gross Power - 1,700 rpm SAE J1995:2014
, 431 hp (metric)
Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011
, 393 hp
Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011
, 398 hp (metric)
Engine Torque - 1,200 rpm ISO 14396:2002
, 1612 lbf·ft
Gross Torque - 1,200 rpm SAE J1995:2014
, 1627 lbf·ft
Net Torque - 1,100 rpm ISO 9249:2007, SAE J1349:2011
, 1539 lbf·ft
Displacement
, 763 in³
Emissions
, Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
Biodiesel Capability
, Up to B20¹
Note (1)
, The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (2)
, ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to:
20% biodiesel FAME (fatty acid methyl ester)
***100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application.
Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details.
*While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use.
**Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
***Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Engine Torque @ 1,200 rpm – ISO 14396:2002
, 1612 lb/ft
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
, 1539 lb/ft
Note (3)
, Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Gross Torque @ 1,200 rpm – SAE J1995:2014
, 1627 lb/ft
Gross Power @ 1,700 rpm – SAE J1995:2014
, 425 hp
Displacement
, 12.5 L
Engine Power @ 1,700 rpm – ISO 14396:2002
, 429 hp
Operating Weight
, 66877 lb
Note
, Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m³ (7.1 yd³) general purpose bucket with BOCE.
Forward - 1
, 4.3 mile/h
Forward - 2
, 8.3 mile/h
Forward - 3
, 14.6 mile/h
Forward - 4
, 24.5 mile/h
Reverse - 1
, 4.8 mile/h
Reverse - 2
, 9.4 mile/h
Reverse - 3
, 16.7 mile/h
Reverse - 4
, 24.5 mile/h
Note
, Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
Implement System - Maximum Pump Output at 2,250 rpm
, 119 gpm
Implement System - Maximum Operating Pressure
, 4975 psi
Hydraulic Cycle Time - Total
, 10.1 s
Height - Top of Hood
, 10.08 ft
Height - Top of ROPS
, 12.58 ft
Ground Clearance
, 1.42 ft
Wheel Base
, 12.5 ft
Overall Length - Without Bucket
, 27.42 ft
Hinge Pin Height at Carry Height
, 2.17 ft
Hinge Pin Height at Maximum Lift
, 15.58 ft
Lift Arm Clearance at Maximum Lift
, 13.5 ft
Rack Back - Maximum Lift
, 61 °
Rack Back - Carry Height
, 50 °
Width over Tires (Loaded)
, 10.75 ft
Tread Width
, 8 ft
Note
, All dimensions are approximate and based on machine equipped with 5.4 m³ (7.1 yd³) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Rack Back - Carry Height
, 50 degrees
Rack Back at Ground
, 40 degrees
Rack Back - Maximum Lift
, 61 degrees
Air Conditioning, The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
- If equipped with R134a (Global Warming Potential = 1430), the system contains 1.600 kg (3.5 lb) of refrigerant, which has a CO2 equivalent of 2.288 metric tonnes (2.522 tons).
- If equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.389 kg (3.1 lb) of refrigerant, which has a CO2 equivalent of .001 metric tonnes (1.10 tons).
Static Tipping Load - Full 40° Turn - With Tire Deflection
, 43432 lb
Static Tipping Load - Full 40° Turn - No Tire Deflection
, 46208 lb
Breakout Force
, 51008 lbf
Note (1)
, For a machine configuration as defined under “Weight.”
Note (2)
, Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Fuel Tank
, 112.5 gal (US)
DEF Tank
, 5.5 gal (US)
Cooling System
, 13.7 gal (US)
Crankcase
, 9.8 gal (US)
Transmission
, 20.3 gal (US)
Differential - Final Drives - Front
, 22.2 gal (US)
Differential - Final Drives - Rear
, 22.2 gal (US)
Hydraulic Tank
, 40.4 gal (US)
Height - Top of Hood
, 10.08 ft
Height - Top of ROPS
, 12.58 ft
Ground Clearance
, 1.42 ft
Wheel Base
, 12.5 ft
Overall Length - Without Bucket
, 26.83 ft
Hinge Pin Height at Carry Height
, 2 ft
Hinge Pin Height at Maximum Lift
, 14.92 ft
Lift Arm Clearance at Maximum Lift
, 12.67 ft
Rack Back - Maximum Lift
, 61 °
Rack Back - Carry Height
, 48 °
Width over Tires (Loaded)
, 10.75 ft
Tread Width
, 8 ft
Note
, All dimensions are approximate and based on machine equipped with 5.4 m³ (7.1 yd³) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
Rack Back - Carry Height
, 50 degrees
Rack Back - Maximum Lift
, 61 degrees
Rack Back at Ground
, 40 degrees
Optional Equipment
Standard and optional equipment may vary. Consult your Cat dealer for details.
Footrest
HMU steering wheel
Implement joystick (2V, 3V only)
Entertainment radio (FM, AM, USB, BT)
Entertainment radio (DAB+)
CB radio ready
Seat, suede/cloth, air suspension, heated
Seat, leather/cloth, air suspension, heated/cooled
Mirrors, heated
Windows, front, heavy duty
Full cab window guard
Turbine, air precleaner
Radiator, high debris
Cooling fan, reversible
Axles, limited slip differential(s)
Axles, ecology drains, AOC ready, extreme temperature seals
Axles, oil cooler
Heafy-duty transmission
Cold start, 120V or 240V
Lights: LED
3rd and 4th auxiliary functions with ride control
Quick coupler control
High lift, Z-bar
Tire pressure monitor
Cat Advanced Payload
Cat Payload for Trade (Available in Europe and Australia. Country certifications vary. Contact your Cat dealer for more information.)
Cat Payload Printer with E-ticket
4-point seat belt (kit)
Rear vision camera, dedicated
Surround vision, dedicated
Window cleaning platform, front
Collision warning system
Collision mitigation system
Reverse strobe lights (Not compatible with roading arrangements)
Warning beacon
Secondary steering system, electrical (Standard where mandated)
