D2 Small Dozer

NEW | 2024 CAT D2-0XKM04364

DETALLES DE LA LISTA

Modelo
D2
Familia de productos
DOZERS
Fabricante
CAT
Año
2024
Número de serie
0XKM04364
Ubicación
SAN DIEGO, RANCHO BERNARDO
Número de unidad
038811
Especificaciones
  • Equipamiento de serie
  • Equipamiento opcional
  • Especificaciones
  • Docs

Equipamiento de serie

  • POWER TRAIN
    • Air cleaner with precleaner, automatic dust ejection and under hood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • ELÉCTRICO
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • CARRO BAJO
    • SALT undercarriage (43 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • HYDRAULIC
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • CAT TECNOLOGÍA
    • Low Slip Traction Control (included with ARO and Cat Grade 3D)
    • Slope Indicate
    • Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
    • Compatibility with radios and base stations from Trimble, Topcon, and Leica
    • Capability to install 3D grade systems from Trimble, Topcon, and Leica
    • Cat Product Link™ PLE643/PLE743 Cellular
  • ATTACHMENTS
    • Rigid drawbar
    • Front pull device
  • ENTORNO DEL OPERADOR
    • Armrests, adjustable
    • Percha
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco Mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic

Equipamiento opcional

  • POWER TRAIN
    • Air cleaner with external precleaner
    • Installation, winch
  • ELÉCTRICO
    • Four integrated front LED lights, two rear LED
  • CARRO BAJO
    • Abrasion undercarriage (38 section)
    • Track Pairs
      – Track, 460 mm (18 in)
      – Track, 635 mm (25 in)
  • HYDRAULIC
    • Four valve for use with ripper
    • Four valve for use with winch
  • CAT TECNOLOGÍA
    • Cat Grade with Slope Assist
    • Cat Grade with 3D
    • Blade Load Monitor (included with Cat Grade 3D)
    • AutoCarry (included with Cat Grade 3D)
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 10 in (254 mm) touchscreen grade display
    • Cat Command Console
    • Cat Command Station
  • ATTACHMENTS
    • Drawbar, towing
    • Machine security system
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
    • Winch, hydraulic, high performance
    • Winch, hydraulic, retrieval
  • ENTORNO DEL OPERADOR
    • Power Pitch
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspended, cloth or vinyl
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Supresión acústica
  • OTROS
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether

Especificaciones

Visión general

Nombre largo:
D2 Dozer
Nombre:
D2
Marca:
Caterpillar
Estado:
Actual

Motor

Modelo de motor
Cat® C3.6
Power - Net
92 HP / 68.8 kW
Desplazamiento
220 in³ / 3,6 l
Net Power - 2,200 rpm - SAE J1349
92 HP / 68.8 kW
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
92 HP / 68.8 kW
Nota (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

Motor 

Power Train 
Hidrostático

Motor

Nota (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Pesas

Peso operativo
18382 lb / 8338 kg

Pesas 

Peso operativo
18382 lb / 8338 kg

Pesas

Operating Weight - LGP
19066 lb / 8648 kg
Nota (2)
For machine with ripper, add 554 kg (1,222 lb).
Nota (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Cabina

FOPS
ISO 3449:2005 Nivel II
ROPS
ISO 3471:2008

Transmisión

Drive Pumps
1
Maximum Travel Speed - Forward
5.6 mile/h / 9 km/h
Relief Valve Settings
7033 psi / 48500 kPa
Maximum Travel Speed - Reverse
10 km/h / 6,2 millas/h
Track Motors
2

Undercarriage

Length - Track on Ground - LGP
89 in / 2248 mm
Ancho de vía
61 in / 1550 mm
Number of Rollers - Each Side
7
Track Gauge - LGP
68 in / 1725 mm
Ground Pressure - LGP
4.3 psi / 29.7 kPa
Shoe Width - Standard
18 in / 460 mm
Shoe Width - LGP
635 mm
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43

Undercarriage 

Number of Shoes - Each Side - Abrasion Undercarriage 
38
Ground Pressure 
5.7 psi / 39.5 kPa
Length of Track on Ground 
89 in / 2248 mm

Capacidades de recarga de servicio

Depósito de combustible
51.5 gal (US) / 195 l
Crankcase - With Filter
2,8 gal (US) / 10,5 l
Final Drive - Each - LGP
2,6 gal (US) / 10 l
Sistema de refrigeración
5 gal (US) / 19 l
Transmission - Hydraulic Tank
23.8 gal (US) / 90 l
Depósito de líquido de escape diésel (DEF)
4.9 gal (US) / 19 l

Capacidades de recarga de servicio 

Final Drives - Each Side 
2,6 gal (US) / 10 l

Controles hidráulicos

Pump Output
17.2 gal/min / 65 l/min
Relief Valve Settings
2988 psi / 20600 kPa

Ripper

Tipo
Parallelogram
Number of Shanks
3
Altura
165 mm
Peso
1222 lb / 554 kg
Profundidad máxima de excavación
13.3 in / 337.5 mm
Maximum Ground Clearance Under Tip
17.6 in / 448 mm
Anchura total
67,3 pulgadas / 1710 mm
Maximum Reach - Ground Line
766 mm / 30,2 pulg.

Sistema de aire acondicionado

Aire acondicionado
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensiones

BLADE: Digging Depth - LGP
23.2 in / 589 mm
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
BLADE: Blade Lift Height - LGP
27.9 in / 708 mm
BLADE: Blade Width - LGP
124 in / 3149 mm
BLADE: Blade Width at Maximum Angle - LGP
113.1 in / 2874 mm
Track Gauge - LGP
67.9 in / 1725 mm
Ground Clearance - LGP
13 in / 332 mm
BLADE: Blade Height - LGP
35.8 in / 910 mm
Overall Length - With Blade - LGP
168.2 in / 4272 mm
BLADE: Blade Capacity (SAE) - LGP
2.42 yd³ / 1.85 m³
BLADE: Maximum Tilt - LGP
17.2 in / 438 mm
BLADE: Maximum Angle (either side) - LGP
25°

Dimensiones 

BLADE: Maximum Angle (either side) - Standard 
25°
Ground Clearance - Standard 
13 in / 332 mm
Overall Length - With Blade - Standard 
168.5 in / 4281 mm

Dimensiones

Nota
Abrasion Undercarriage

Dimensiones 

BLADE: Blade Cutting Edge Angle, Adjustable - Standard 
52° to 58°
BLADE: Maximum Tilt - Standard 
15.2 in / 387 mm
Track Gauge - Standard 
61 in / 1550 mm
BLADE: Digging Depth - Standard 
23.3 in / 593 mm
BLADE: Blade Width - Standard 
109.5 in / 2782 mm
BLADE: Blade Lift Height - Standard 
743 mm
BLADE: Blade Capacity (SAE) - Standard 
2.59 yd³ / 1.98 m³
BLADE: Blade Width at Maximum Angle - Standard 
100.1 in / 2542 mm
Nota 
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
BLADE: Blade Height - Standard 
39.8 in / 1010 mm

Dimensiones

Length of Basic Dozer (without blade) - LGP
129.5 in / 3290 mm
Width of Dozer (standard shoes, no blade) - Standard
79,1 pulgadas / 2010 mm
Dozer Height - LGP
108.9 in / 2765 mm
Dozer Height - Standard
108.9 in / 2765 mm
Width of Dozer (standard shoes, no blade) - LGP
92.9 in / 2360 mm
Length of Basic Dozer (without blade) - Standard
129.5 in / 3290 mm

Cabrestante de recuperación

Velocidad máxima de la línea - Tambor lleno
79 ft/min / 24 m/min
Maximum Line Speed - Bare Drum
15 m/min / 50 pies/min
Peso
1747 lb / 794 kg
Drum Capacity - Optional Cable
195 ft / 59 m
Rope Diameter - Recommended
0.63 in / 16 mm
Winch Drive
Hidráulico
Rope Diameter - Optional
0.75 in / 19 mm
Drum Capacity - Recommended Cable
277 ft / 84 m
Tracción máxima de la línea - Tambor lleno
20350 lb / 9231 kg
Velocidad
Variable
Maximum Line Pull - Bare Drum
32150 lb / 14583 kg
Control
Hidráulico
Overall width
27.91 in / 709 mm
Anchura del tambor
9.65 in / 245 mm
Diámetro del tambor
8 pulgadas / 203,2 mm
Winch Length
35.63 in / 905 mm
Throat Clearance
5.6 in / 141.4 mm

High Performance Winch

Maximum line pull – bare drum
40000 lb / 18144 kg
Drum capacity – recommended cable
371 ft / 113 m
Winch length
27.76 in / 705 mm
Overall width
741 mm / 29,2 pulgadas
Control
Hidráulico
Maximum line speed – bare drum
131 ft/min / 40 m/min
Maximum line speed – full drum
207 ft/min / 63 m/min
Drum width
10.8 in / 274 mm
Drum capacity – optional
256 ft / 78 m
Throat clearance
171,5 mm / 6,75 pulg.
Peso
1345 lb / 610 kg
Rope diameter – recommended
0.63 in / 16 mm
Velocidad
Variable
Maximum line pull – full drum
25000 lb / 11340 kg
Drum diameter
10 in / 254 mm
Rope diameter – optional
0.75 in / 19 mm
Winch drive
Hidrostático