TRS4, Pin On (Pin Grabber) / Pin Grabber, 3-4 Ton Mini Excavators
TRS4, Pin On (Pin Grabber Coupler) / Pin Grabber Coupler, 3-4 Ton Mini Excavators
DESCRIPTION
Cat® Tiltrotators help you maneuver obstacles in your work area without the need for repositioning your machine.Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.Complete 360 Degree Rotation and 40 Degree Angling
Provides optimal control of your work tools to provide greater working flexibility. All tiltrotators include rotation and tilting sensors.
Integrated Central Lubrication System
A single point of entry for grease allows the entire unit to be greased quickly and easily.
TRS Control System
Compatible with either the standard or advanced machine display, the TRS uses the existing machine display to view position information and to adjust settings. This eliminates the need for additional displays that clutter up the cab of your excavator.
Oil Filled Gearbox
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Heavy Duty Worm Gear
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Double Acting Cylinders with Load Hold Valves
Valves sustain holding pressures and prevent cylinders movement under load constraints required by directives.
Visual Verification Indicator
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
Optional Grapple Attachment
Used to pick up objects such as pipe and debris. (not compatible with the pin grabber bottom option)
Locking Control System (LCS)
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
Bucket Shake
Automatically spread material evenly and quickly or release material stuck in bucket.
Auto Return Function
Return to a rotation and tilt position that has been set by the operator.
Auxiliary Port Options
Auxiliary hydraulic ports (Aux 1 and Aux 2 on TRS6 and TRS8, Aux 1 on TRS4) allow the use of various accessories that are available for tiltrotators, including grapples.
Optional Grade Control (RPS)
Grade control systems allow operators to reach finish grade faster with fewer personnel on the ground checking grade. Optional 2D and 3D grade control systems available on all TRS models.
- Specs
- Docs
Specs
Overview
SEE HOW TRS4, Pin On (Pin Grabber) / Pin Grabber, 3-4 Ton Mini Excavators COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Cat
- Status
- Current
- Machine Class
- 3-4 Ton Mini Excavators
- Weight
- 299.8 lb / 136 kg
- Interface Options: Top-Bottom
- Pin On (Pin Grabber) Coupler / Pin Grabber Coupler
- Overall Height
- 27.6 in / 700 mm
- Length
- 19.1 in / 486 mm
- Overall Width
- 18.3 in / 465 mm
- Rotation Speed
- 7 Seconds per 1 full rotation
- Tilt Angle Range
- 40° Left/Right
- Maximum Bucket Capacity
- 3.9 ft³ / 110 l
- Maximum Bucket Width
- 39.4 in / 1000 mm
- Optimal Hydraulic Flow
- 17-25 L/min (4.5-6.7 gpm)
- Maximum Operating Pressure
- 3045.8 psi / 21000 kPa
- Required Hydraulics
- 1st Auxiliary
- Tilting Torque
- 4277.9 lb/ft / 5800 N·m
- Turning Torque
- 1253.9 lb/ft / 1700 N·m
- Brand
- Cat
- Status
- Current
- Machine Class
- 2 Ton Mini Excavator
- Weight
- 255.5 lb / 115.9 kg
- Interface Options: Top-Bottom
- Pin On (Pin Grabber Coupler) / Pin Grabber
- Overall Height
- 30.8 in / 782 mm
- Length
- 18.9 in / 480 mm
- Overall Width
- 17.9 in / 454 mm
- Rotation Speed
- 7 Seconds per 1 full rotation
- Tilt Angle Range
- 40° Left/Right
- Maximum Bucket Capacity
- 3.9 ft³ / 110 l
- Maximum Bucket Width
- 39.4 in / 1000 mm
- Optimal Hydraulic Flow
- 17-25 L/min (4.5-6.7 gpm)
- Maximum Operating Pressure
- 3045.8 psi / 21000 kPa
- Required Hydraulics
- 1st Auxiliary
- Tilting Torque
- 4277.9 lb/ft / 5800 N·m
- Turning Torque
- 1253.9 lb/ft / 1700 N·m
- Brand
- Cat
- Status
- Current
- Machine Class
- 2 Ton Mini Excavators
- Weight
- 264.6 lb / 120 kg
- Interface Options: Top-Bottom
- Pin On (Pin Grabber Coupler) / S40 Coupler
- Overall Height
- 27.6 in / 702 mm
- Length
- 18.9 in / 480 mm
- Overall Width
- 15 in / 381 mm
- Rotation Speed
- 7 Seconds per 1 full rotation
- Tilt Angle Range
- 40° Left/Right
- Maximum Bucket Capacity
- 3.9 ft³ / 110 l
- Maximum Bucket Width
- 39.4 in / 1000 mm
- Optimal Hydraulic Flow
- 17-25 L/min (4.5-6.7 gpm)
- Maximum Operating Pressure
- 3045.8 psi / 21000 kPa
- Required Hydraulics
- 1st Auxiliary
- Tilting Torque
- 4277.9 lb/ft / 5800 N·m
- Turning Torque
- 1253.9 lb/ft / 1700 N·m