350

Built For Rugged Conditions

    
• The reinforced swing bearing, along with stress-relieved boom and stick, enables the 350 to take on tough work over and over again.
    
• Work up to 4500 m (14,764 ft) above sea level.
    
• Standard high-ambient temperature capability is 52°C (125°F). Standard cold start capability is -18°C (0°F); -32°C (-25°F) cold start capability is an available option.
    
• Automatic hydraulic oil warmup gets you to work faster in cold temperatures and helps prolong the life of components.
    
• Three levels of filtration protect the engine from dirty diesel fuel.
    
• Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
    
• Standard built-in protection includes bottom, travel motor,and swivel guards.
    
• The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.

Take The Guesswork Out of Managing Your Equipment

    
• ​VisionLink® provides actionable data insights for all assets - regardless of fleet size or equipment manufacturer.* Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.​
    
• VisionLink® Productivity gathers and summarizes machine telematics and jobsite data from all your equipment – regardless of the manufacture.* View actionable information such as idle time, fuel burn, location, payload, load counts, total cycles, and more to improve machine efficiency, productivity, and utilization. Access data anywhere via a mobile, tablet, or desktop device - on or off the jobsite.​
    
• Cat® Inspect is a mobile application that allows you to easily perform digital preventative maintenance (PM) checks, inspections, and daily walkarounds. Inspections can easily be integrated with other Cat data systems like VisionLink® so you can keep a close eye on your fleet.​
    
• Remote Troubleshoot is a mobile application that allows your Cat dealer to perform diagnostic testing on your connected machine remotely to help ensure that issues are resolved quickly and with less downtime.​
    
• Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.​
    
• The Cat PL161 attachment locator allows you to track attachments across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The work tool recognition feature automatically adjusts machine settings based on the selected tool.​

* Data field availability can vary by equipment manufacturer.​

High Performance, Low Fuel Consumption

    
• Powerful digging force and strong swing torque enable the use of large buckets up to 3.2 m3 (4.2 yd3) for class-leading productivity.
    
• Compared to the Cat 349-07, the 350 consumes up to 13 percent less fuel for lower operating costs and greater profit potential.
    
• Match the excavator to the job with three power modes – Smart, Power, and Eco. Smart mode automatically matches engine and hydraulic power to digging conditions, providing maximum power when needed and reducing power when it isn’t to help save fuel. Power mode is maximum power all the time. Eco mode reduces engine speed and keeps it constant to reduce fuel consumption.
    
• Valve priority puts hydraulic pressure and flow where you command it to go for fast light- to medium-load cycle times.

Safety

    
• Enhance jobsite safety by adding Cat Command to your fleet. The remote control system comes with everything you need like WIFI radio, cameras, and microphone so you can work outside of the cab and avoid potential hazards. 
    
• Cat Detect - People Detection helps protect the most valuable asset on any jobsite – people. The system uses smart cameras with depth sensors to provide the operator with visual and auditory alerts so he or she can take immediate action when a person is too close to the excavator.  
    
• Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
    
• A travel direction indicator helps operators know which way to activate the travel levers. 
    
• A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
    
• Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab posts and larger windows.
    
• Make service work easier and safer with inspection lighting. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.
    
• Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
    
• Add an optional swing alarm to safeguard surroundings and assets. This feature sends out warnings to the operator for any unexpected swings to enhance safety, minimizing downtime and increasing productivity.
    
• A rearview camera is standard.
    
• The Rollover Protective Structure (ROPS) cab meets industry standards and protects the operator in the event of a rollover.

Sustainability

    
• The Cat® C7.1 TTA engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
    
• Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
    
• Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy.
    
• Auto engine speed control reduces unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.   
    
• Cat® Payload for excavators provides on-the-go material weighing, which helps reduce fuel burn by improving loading efficiency, jobsite productivity, and eliminating trips to the scale.
    
• Cat® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards such as traffic - not only helping keep personnel safe but also helps you avoid repairs, downtime, and costly job site fines.
    
• Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
    
• Cat VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the runtime fuel burned each day in a selected date range.
    
• Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
    
• Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.