3508

3508 Land Mechanical Drilling Engine

3508 Land Drilling Engines

DESCRIPTION

Cat 3508 engines set the standard in the drilling industry. For many years the 3500 has been the preferred choice by drillers due to their high performance, durability, and reliability in the oilfield. The ideal application for the 3508 engine is mechanical drive for land drilling rigs. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3508 engines, with ratings: 3508 engines, with ratings: 507-846 bkW (680-1135 bhp) @ 1200-1900 rpm. Not emissions certified, available for non-regulated areas.Cat 3508 engines set the standard in the drilling industry. For many years the 3500 has been the preferred choice by drillers due to their high performance, durability, and reliability in the oilfield. The ideal application for the 3508 engine is mechanical drive for land drilling rigs. 3508 engines, with ratings: 3508 engines, with ratings: 507-846 bkW (680-1135 bhp) @ 1200-1900 rpm. Not emissions certified, available for non-regulated areas.Oil and Gas

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Testing

- Every Cat generator set is full-load tested to ensure proper engine performance. - Generator sets are assembled, tested, and validated as a package to ensure performance, reliability and durability.

Product Support Offered Through Global Cat Dealer Network

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: • Internal engine component condition • Presence of unwanted fluids • Presence of combustion by-products • Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • Air Inlet System
    • Corrosion-resistant aftercooler core
    • Regular duty air cleaner
    • Service indicator
  • Control System
    • Governor, Woodward 3161 — RH
    • Pneumatic control
    • Governor control - positive locking
  • Cooling System
    • Thermostats and housing (dual outlet)
    • Jacket water pump, gear driven
  • Exhaust System
    • Dry exhaust manifold
    • Exhaust flexible fitting, adapters, and flanges
  • Flywheel and Housing
    • SAE No. 00 flywheel
    • SAE No. 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter
    • Fuel transfer pump
    • Flexible fuel lines
    • Fuel priming pump
  • Instrumentation
    • Analog instrument gauges:
  • Lubrication System
    • Crankcase breather
    • Oil cooler
    • Oil filter
    • Shallow oil pan
    • Oil drain extension, 2 in NPT female connection
  • Mounting System
    • Rails, mounting, floor type
  • Power take-offs
    • Accessory drive
    • Front housing, two-sided
  • Protection System
    • Manual shutoff control, LH
    • Junction box
    • Safety shutoff protection, energized to shutdown
  • Starting System
    • Air starting motor
    • Air silencer
  • General
    • Paint - Cat yellow
    • Vibration damper and guard
    • Lifting eyes

Optional Equipment

  • Air Inlet System
    • Heavy duty air cleaner
    • Remote air inlet adapters
  • Control System
    • Load sharing governor, 2301A
    • Load sharing module
    • Governor conversion to 0-200 mA direct rack control
    • Local speed throttle control
    • Throttle position sensors
  • Cooling System
    • High gloss black folded core radiators and conventional core radiators
    • Belt guard
    • Blower fan
    • Fan drive and fan pulley
    • Radiator cover
    • Water level switch gauge
    • Air separator
    • Coolant level sensors
    • Connections
  • Exhaust System
    • Exhaust elbows
    • Exhaust mufflers
  • Fuel System
    • Primary fuel filter
  • Generator and Attachments
    • Low voltage extension box
    • Potential and current transformers
    • Air filter
    • Cable access box
    • Bearing RTDs
  • Instrumentation
    • Customer management device
    • Gauges and instrumentation panels
    • Switches and contactors
  • Lubrication System
    • Crankcase fumes disposal
    • Oil pan accessories
  • Power Take-off
    • Crankshaft pulley
    • Front stub shaft
    • Charging alternator
    • Air compressor
  • Protection System
    • Explosion relief valves (3)
    • Shutoffs
    • Switches and contactors
  • Starting System
    • Manual air starter
    • Air pressure regulator
  • General
    • Flywheel guard

Specs

Overview

Long Name:
3508 Land Mechanical Drilling Engine
Name:
3508
Brand:
Caterpillar
Status:
Current

Engine Specifications

Maximum Rating
1135 BHP / 846 bkW
Emissions
Non-certified
Displacement
2111 in³ / 34.5 l
Minimum Rating
680 BHP / 507 bkW
Bore
6.69 in / 170 mm
Stroke
7.48 in / 190 mm
Rated Speed
1900 r/min / 1900 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
W3161
Engine Weight - Net Dry
9500 lb / 4309 kg
Oil Change Interval
500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
151

Capacity for Liquids

Minimum Cooling System - Engine Only
27.2 gal (US) / 103 l

Dimensions

Length
84.1 in / 2136 mm
Width
67 in / 1702 mm
Height
67.7 in / 1720 mm

SEE HOW 3508 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Land Drilling Engines and Generator Sets
3508
3508 Land Drilling Engines
Brand
Caterpillar
Status
Current
Maximum Rating
1135 BHP / 846 bkW
Emissions
Non-certified
Displacement
2111 in³ / 34.5 l
Minimum Rating
680 BHP / 507 bkW
Bore
6.69 in / 170 mm
Stroke
7.48 in / 190 mm
Rated Speed
1900 r/min / 1900 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
W3161
Engine Weight - Net Dry
9500 lb / 4309 kg
Oil Change Interval
500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
151
Minimum Cooling System - Engine Only
27.2 gal (US) / 103 l
Length
84.1 in / 2136 mm
Width
67 in / 1702 mm
Height
67.7 in / 1720 mm
Land Drilling Engines and Generator Sets
3508C
3508C Land Drilling Engines
Brand
Caterpillar
Status
Current
Maximum Rating
900 BHP / 671 bkW
Emissions
U.S. EPA Non-road Tier 2
Displacement
2111 in³ / 34.5 l
Minimum Rating
900 BHP / 671 bkW
Bore
6.69 in / 170 mm
Stroke
7.48 in / 190 mm
Rated Speed
1200 r/min / 1200 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A3
Engine Weight - Net Dry
10101 lb / 4582 kg
Oil Change Interval
500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
183
Minimum Cooling System - Engine Only
27.2 gal (US) / 103 l
Length
84.1 in / 2136 mm
Width
67 in / 1702 mm
Height
79.7 in / 2024 mm
Land Drilling Engines and Generator Sets
3508B
3508B Land Drilling Engines
Brand
Caterpillar
Status
Current
Maximum Rating
900 BHP / 671 bkW
Emissions
Non-certified
Displacement
2111 in³ / 34.5 l
Minimum Rating
760 BHP / 567 bkW
Bore
6.69 in / 170 mm
Stroke
7.48 in / 190 mm
Rated Speed
1200 r/min / 1200 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A3
Engine Weight - Net Dry
9500 lb / 4309 kg
Oil Change Interval
500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
151
Minimum Cooling System - Engine Only
27 gal (US) / 103 l
Length
84.1 in / 2136 mm
Width
67 in / 1702 mm
Height
79.7 in / 2024 mm